Add support for V37 board

[karo-tx-uboot.git] / include / commproc.h

diff --git a/include/commproc.h b/include/commproc.h
index 42db99897a3bcf99956bc19a59ad89dcec9f8b0c..159c294f8443e512f2f870d825546167eb7be070 100644 (file)
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -1100,6 +1100,34 @@ typedef struct scc_enet {
 #define SICR_ENET_CLKRT        ((uint)0x00002e00)      /* RCLK-CLK2, TCLK-CLK3 */
 #endif /* CONFIG_MHPC */
 
+/***  NETVIA  *******************************************************/
+
+#if defined(CONFIG_NETVIA)
+/* Bits in parallel I/O port registers that have to be set/cleared
+ * to configure the pins for SCC2 use.
+ */
+#define        PROFF_ENET      PROFF_SCC2
+#define        CPM_CR_ENET     CPM_CR_CH_SCC2
+#define        SCC_ENET        1
+#define PA_ENET_RXD    ((ushort)0x0004)        /* PA 13 */
+#define PA_ENET_TXD    ((ushort)0x0008)        /* PA 12 */
+#define PA_ENET_RCLK   ((ushort)0x0200)        /* PA  6 */
+#define PA_ENET_TCLK   ((ushort)0x0800)        /* PA  4 */
+
+#define PB_ENET_PDN    ((ushort)0x4000)        /* PB 17 */
+#define PB_ENET_TENA   ((ushort)0x2000)        /* PB 18 */
+
+#define PC_ENET_CLSN   ((ushort)0x0040)        /* PC  9 */
+#define PC_ENET_RENA   ((ushort)0x0080)        /* PC  8 */
+
+/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
+ * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
+ */
+#define SICR_ENET_MASK ((uint)0x0000ff00)
+#define SICR_ENET_CLKRT        ((uint)0x00002f00)
+
+#endif /* CONFIG_NETVIA */
+
 /***  RPXCLASSIC  *****************************************************/
 
 #ifdef CONFIG_RPXCLASSIC
@@ -1309,31 +1337,27 @@ typedef struct scc_enet {
 # endif        /* CONFIG_FEC_ENET */
 #endif /* CONFIG_TQM860L, CONFIG_TQM855L */
 
-#if defined(CONFIG_NETVIA)
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC2 use.
+/***  V37  **********************************************************/
+
+#ifdef CONFIG_V37
+/* This ENET stuff is for the MPC823 with ethernet on SCC2.  Some of
+ * this may be unique to the Marel V37 configuration.
+ * Note TENA is on Port B.
  */
 #define        PROFF_ENET      PROFF_SCC2
 #define        CPM_CR_ENET     CPM_CR_CH_SCC2
 #define        SCC_ENET        1
-#define PA_ENET_RXD    ((ushort)0x0004)        /* PA 13 */
-#define PA_ENET_TXD    ((ushort)0x0008)        /* PA 12 */
-#define PA_ENET_RCLK   ((ushort)0x0200)        /* PA  6 */
-#define PA_ENET_TCLK   ((ushort)0x0800)        /* PA  4 */
-
-#define PB_ENET_PDN    ((ushort)0x4000)        /* PB 17 */
-#define PB_ENET_TENA   ((ushort)0x2000)        /* PB 18 */
-
-#define PC_ENET_CLSN   ((ushort)0x0040)        /* PC  9 */
-#define PC_ENET_RENA   ((ushort)0x0080)        /* PC  8 */
+#define PA_ENET_RXD    ((ushort)0x0004)
+#define PA_ENET_TXD    ((ushort)0x0008)
+#define PA_ENET_TCLK   ((ushort)0x0400)
+#define PA_ENET_RCLK   ((ushort)0x0200)
+#define PB_ENET_TENA   ((uint)0x00002000)
+#define PC_ENET_CLSN   ((ushort)0x0040)
+#define PC_ENET_RENA   ((ushort)0x0080)
 
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
 #define SICR_ENET_MASK ((uint)0x0000ff00)
-#define SICR_ENET_CLKRT        ((uint)0x00002f00)
-
-#endif /* CONFIG_NETVIA */
+#define SICR_ENET_CLKRT        ((uint)0x00002e00)
+#endif /* CONFIG_V37 */
 
 /*********************************************************************/