arm: ti: Increase malloc size to 16MB for armv7 boards

[karo-tx-uboot.git] / include / configs / DU440.h

diff --git a/include/configs/DU440.h b/include/configs/DU440.h
index bbe271303a839f6bc15d6bdaa8c6795f8318cacd..be5494b2ec5af34be37e77831646c8bb605108e9 100644 (file)
--- a/include/configs/DU440.h
+++ b/include/configs/DU440.h
@@ -5,20 +5,7 @@
  * based on the Sequoia board configuration by
  * Stefan Roese, Jacqueline Pira-Ferriol and Alain Saurel
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -34,7 +21,6 @@
  */
 #define CONFIG_DU440           1               /* Board is esd DU440   */
 #define CONFIG_440EPX          1               /* Specific PPC440EPx   */
-#define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_SYS_CLK_FREQ    33333400        /* external freq to pll */
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -170,19 +156,20 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
-#undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           100000  /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_I2C_MULTI_BUS    1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
+#define CONFIG_SYS_I2C_PPC4XX_CH1
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_1          100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1          0x7F
 
 #define CONFIG_SYS_SPD_BUS_NUM         0
 #define IIC1_MCP3021_ADDR      0x4d
 #define IIC1_USB2507_ADDR      0x2c
-#ifdef CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_NOPROBES        {{1, IIC1_USB2507_ADDR}}
-#endif
+#define CONFIG_SYS_I2C_NOPROBES                { {1, IIC1_USB2507_ADDR} }
+
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x54
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
@@ -235,7 +222,7 @@
        "flash_self=run ramargs addip addtty optargs;"                  \
                "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
        "net_nfs=tftp 200000 ${img};run nfsargs addip addtty optargs;"  \
-               "bootm\0"                                               \
+               "bootm\0"                                               \
        "rootpath=/tftpboot/du440/target_root_du440\0"                  \
        "img=/tftpboot/du440/uImage\0"                                  \
        "kernel_addr=FFC00000\0"                                        \
@@ -322,7 +309,6 @@ int du440_phy_addr(int devnum);
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory         */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt       */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size      */
 #else
@@ -339,8 +325,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_SYS_LOAD_ADDR           0x100000  /* default load address       */
 #define CONFIG_SYS_EXTBDINFO           1       /* To use extended board_into (bd_t) */
 
-#define CONFIG_SYS_HZ                  1000    /* decrementer freq: 1 ms ticks */
-
 #define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
 #define CONFIG_LOOPW            1       /* enable loopw command         */
 #define CONFIG_MX_CYCLIC        1       /* enable mdc/mwc commands      */
@@ -357,6 +341,7 @@ int du440_phy_addr(int devnum);
  * PCI stuff
  */
 #define CONFIG_PCI                     /* include pci support          */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_PNP                 /* do (not) pci plug-and-play   */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
 #define CONFIG_SYS_PCI_TARGBASE       0x80000000 /* PCIaddr mapped to CONFIG_SYS_PCI_MEMBASE*/
@@ -420,7 +405,6 @@ int du440_phy_addr(int devnum);
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif
 
 #define CONFIG_SOURCE          1