Merge branch 'master' of git://git.denx.de/u-boot-i2c

[karo-tx-uboot.git] / include / configs / MPC8572DS.h

diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index a62b7d53a950aba11f9e0d7b0dee1c8678d01eed..05d887050046eeb23f46c3fcda43837f44f29551 100644 (file)
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -1,23 +1,7 @@
 /*
  * Copyright 2007-2008,2010-2011 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -71,6 +55,7 @@
 #define CONFIG_PCIE2           1       /* PCIE controler 2 (slot 2) */
 #define CONFIG_PCIE3           1       /* PCIE controler 3 (ULI bridge) */
 #define CONFIG_FSL_PCI_INIT    1       /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE 1   /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  1       /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   1       /* enable 64-bit PCI resources */
 
@@ -430,16 +415,16 @@
 #define CONFIG_FIT_VERBOSE     1 /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED           400000  /* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
+#define CONFIG_SYS_I2C_NOPROBES                { {0, 0x29} }
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x57
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_NOPROBES        {{0,0x29}}/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
 
 /*
  * I2C2 EEPROM
@@ -735,7 +720,7 @@
 #define CONFIG_BAUDRATE        115200
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
-"hwconfig=fsl_ddr:ctlr_intlv=bank,ecc=off\0"                   \
+"hwconfig=fsl_ddr:ctlr_intlv=bank,bank_intlv=cs0_cs1,ecc=off\0"                \
 "netdev=eth0\0"                                                \
 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"                            \
 "tftpflash=tftpboot $loadaddr $uboot; "                        \