Merge branch 'master' of git://git.denx.de/u-boot-mips

[karo-tx-uboot.git] / include / configs / P1023RDS.h

diff --git a/include/configs/P1023RDS.h b/include/configs/P1023RDS.h
index 9386674974465b89480990b42378464b2bc0d5e0..a8202c67fdb07b8d402addaf2e64f2143161a657 100644 (file)
--- a/include/configs/P1023RDS.h
+++ b/include/configs/P1023RDS.h
@@ -1,26 +1,10 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
  *
  * Authors:  Roy Zang <tie-fei.zang@freescale.com>
  *          Chunhe Lan <b25806@freescale.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -73,6 +57,7 @@
 #define CONFIG_PCIE2           /* PCIE controler 2 (slot 2) */
 #define CONFIG_PCIE3           /* PCIE controler 3 (slot 3) */
 #define CONFIG_FSL_PCI_INIT    /* Use common FSL init code */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_FSL_PCIE_RESET  /* need PCIe reset errata */
 #define CONFIG_SYS_PCI_64BIT   /* enable 64-bit PCI resources */
 #define CONFIG_FSL_LAW         /* Use common FSL init code */
@@ -299,9 +284,6 @@ extern unsigned long get_clock_freq(void);
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#endif
 
 /*
  * Pass open firmware flat tree
@@ -310,23 +292,20 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#define CONFIG_SYS_64BIT_VSPRINTF
-#define CONFIG_SYS_64BIT_STRTOUL
-
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE     /* enable fit_format_{error,warning}() */
 
 /* I2C */
-#define CONFIG_FSL_I2C         /* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C                /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C         /* I2C bit-banged */
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED   400000  /* I2C speed and slave address */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
+#define CONFIG_SYS_FSL_I2C_SPEED       400000
+#define CONFIG_SYS_FSL_I2C_SLAVE       0x7F
+#define CONFIG_SYS_FSL_I2C_OFFSET      0x3000
+#define CONFIG_SYS_FSL_I2C2_SPEED      400000
+#define CONFIG_SYS_FSL_I2C2_SLAVE      0x7F
+#define CONFIG_SYS_FSL_I2C2_OFFSET     0x3100
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x51
-#define CONFIG_SYS_I2C_SLAVE           0x7F
-#define CONFIG_SYS_I2C_OFFSET          0x3000
-#define CONFIG_SYS_I2C2_OFFSET         0x3100
 
 /*
  * I2C2 EEPROM
@@ -394,15 +373,10 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_E1000           /* Defind e1000 pci Ethernet card */
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 /*
  * Environment
  */
@@ -452,6 +426,8 @@ extern unsigned long get_clock_freq(void);
 /*
  * USB
  */
+#define CONFIG_HAS_FSL_DR_USB
+#ifdef CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI
 
 #ifdef CONFIG_USB_EHCI
@@ -464,6 +440,7 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 #endif
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -500,7 +477,7 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment Configuration
  */
-#define CONFIG_BOOTFILE                uImage
+#define CONFIG_BOOTFILE                "uImage"
 #define CONFIG_UBOOTPATH       (u-boot.bin) /* U-Boot image on TFTP server */
 
 /* default location for tftp and bootm */
@@ -531,12 +508,14 @@ extern unsigned long get_clock_freq(void);
 #ifndef CONFIG_NAND
 /* Default address of microcode for the Linux Fman driver */
 /* QE microcode/firmware address */
-#define CONFIG_SYS_FMAN_FW_ADDR                0xEF000000
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     0xEFF40000
 #else
-#define CONFIG_SYS_QE_FW_IN_NAND       0x1f00000
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR     0x1f00000
 #endif
-#define CONFIG_SYS_FMAN_FW_LENGTH      0x10000
-#define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH)
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH   0x10000
+#define CONFIG_SYS_FDT_PAD             (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 
 #ifdef CONFIG_FMAN_ENET
 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2