Add PCI support for MPC8250 Boards (PM825 module)

[karo-tx-uboot.git] / include / configs / PM826.h

diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index dc06f958cb3bde29668eb07baa51e3be19c155b2..05f7130b2740f960d7e2496ad23ae9793ba0bded 100644 (file)
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -38,6 +38,8 @@
 #define CONFIG_MPC8260         1       /* This is a MPC8260 CPU        */
 #define CONFIG_PM826           1       /* ...on a PM8260 module        */
 
+#undef CONFIG_DB_CR826_J30x_ON         /* J30x jumpers on D.B. carrier */
+
 #define        CONFIG_CLOCKS_IN_MHZ    1       /* clocks passsed to Linux in MHz */
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds     */
@@ -93,33 +95,50 @@
 /*
  * select ethernet configuration
  *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
+ * if CONFIG_ETHER_ON_SCC is selected, then
+ *   - CONFIG_ETHER_INDEX must be set to the channel number (1-4)
+ *   - CONFIG_NET_MULTI must not be defined
+ *
+ * if CONFIG_ETHER_ON_FCC is selected, then
+ *   - one or more CONFIG_ETHER_ON_FCCx (x=1,2,3) must also be selected
+ *   - CONFIG_NET_MULTI must be defined
  *
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
  * from CONFIG_COMMANDS to remove support for networking.
  */
-#undef CONFIG_ETHER_ON_SCC             /* define if ether on SCC       */
-#define        CONFIG_ETHER_ON_FCC             /* define if ether on FCC       */
+#define        CONFIG_NET_MULTI
 #undef CONFIG_ETHER_NONE               /* define if ether on something else */
-#define        CONFIG_ETHER_INDEX    1         /* which SCC/FCC channel for ethernet */
 
-#if (CONFIG_ETHER_INDEX == 1)
+#undef CONFIG_ETHER_ON_SCC             /* define if ether on SCC       */
+#define        CONFIG_ETHER_INDEX    1         /* which SCC channel for ethernet */
+
+#define        CONFIG_ETHER_ON_FCC             /* define if ether on FCC       */
 /*
  * - Rx-CLK is CLK11
  * - Tx-CLK is CLK10
+ */
+#define        CONFIG_ETHER_ON_FCC1
+# define CFG_CMXFCR_MASK1      (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+#ifndef CONFIG_DB_CR826_J30x_ON
+# define CFG_CMXFCR_VALUE1     (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
+#else
+# define CFG_CMXFCR_VALUE1     (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK12)
+#endif
+/*
+ * - Rx-CLK is CLK15
+ * - Tx-CLK is CLK14
+ */
+#define        CONFIG_ETHER_ON_FCC2
+# define CFG_CMXFCR_MASK2      (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CFG_CMXFCR_VALUE2     (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+/*
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CFG_CMXFCR_MASK       (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CFG_CMXFCR_VALUE      (CMXFCR_RF1CS_CLK11|CMXFCR_TF1CS_CLK10)
 # define CFG_CPMFCR_RAMTYPE    0
 # define CFG_FCC_PSMR          (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
-#endif /* CONFIG_ETHER_INDEX */
-
 /* system clock rate (CLKIN) - equal to the 60x and local bus speed */
 #define CONFIG_8260_CLKIN      64000000        /* in Hz */
 
@@ -139,8 +158,9 @@
 #define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
                                 CFG_CMD_BEDBUG | \
                                 CFG_CMD_DATE   | \
+                                CFG_CMD_DOC    | \
                                 CFG_CMD_EEPROM | \
-                                CFG_CMD_DOC)
+                                CFG_CMD_I2C    )
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -191,11 +211,11 @@
  * Flash and Boot ROM mapping
  */
 
-#define        CFG_BOOTROM_BASE        0x60000000
+#define        CFG_BOOTROM_BASE        0xFF800000
 #define        CFG_BOOTROM_SIZE        0x00080000
-#define        CFG_FLASH0_BASE         0x40000000
+#define        CFG_FLASH0_BASE         0xFF000000
 #define        CFG_FLASH0_SIZE         0x02000000
-#define CFG_DOC_BASE           0x60000000
+#define CFG_DOC_BASE           0xFF800000
 #define CFG_DOC_SIZE           0x00100000
 
 
@@ -225,8 +245,8 @@
 #define CFG_I2C_EEPROM_ADDR_LEN        1
 #define CFG_EEPROM_PAGE_WRITE_BITS     4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10      /* and takes up to 10 msec */
-#define CFG_ENV_OFFSET         0
-#define CFG_ENV_SIZE           2048
+#define CFG_ENV_OFFSET         512
+#define CFG_ENV_SIZE           (2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
@@ -283,6 +303,10 @@
 # define CFG_RAMBOOT
 #endif
 
+#define CONFIG_PCI
+#define CONFIG_PCI_PNP
+#define CONFIG_EEPRO100
+
 /*
  * Internal Definitions
  *