Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

[karo-tx-uboot.git] / include / configs / T104xRDB.h

diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h
index 65fc8b7c6d4ae218cd9562b6af48d49865d80563..5e2c100d9309b1b86cbc1ffa06e43031c0ddb076 100644 (file)
--- a/include/configs/T104xRDB.h
+++ b/include/configs/T104xRDB.h
@@ -19,10 +19,12 @@
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg
 #endif
 #ifdef CONFIG_T1042RDB_PI
+#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg
+#endif
+#ifdef CONFIG_T1042RDB
 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg
 #endif
 
-#define CONFIG_SPL 1
 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT
@@ -33,7 +35,7 @@
 #define CONFIG_SPL_I2C_SUPPORT
 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT
 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
-#define CONFIG_SYS_TEXT_BASE           0x00201000
+#define CONFIG_SYS_TEXT_BASE           0x30001000
 #define CONFIG_SPL_TEXT_BASE           0xFFFD8000
 #define CONFIG_SPL_PAD_TO              0x40000
 #define CONFIG_SPL_MAX_SIZE            0x28000
@@ -49,21 +51,21 @@
 #ifdef CONFIG_NAND
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    (768 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     0x00200000
-#define CONFIG_SYS_NAND_U_BOOT_START   0x00200000
+#define CONFIG_SYS_NAND_U_BOOT_DST     0x30000000
+#define CONFIG_SYS_NAND_U_BOOT_START   0x30000000
 #define CONFIG_SYS_NAND_U_BOOT_OFFS    (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #define CONFIG_SPL_NAND_BOOT
 #endif
 
 #ifdef CONFIG_SPIFLASH
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 #define CONFIG_SPL_SPI_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE       (768 << 10)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x00200000)
-#define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x00200000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST                (0x30000000)
+#define CONFIG_SYS_SPI_FLASH_U_BOOT_START      (0x30000000)
 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS       (256 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -73,12 +75,12 @@
 #endif
 
 #ifdef CONFIG_SDCARD
-#define        CONFIG_RESET_VECTOR_ADDRESS             0x200FFC
+#define        CONFIG_RESET_VECTOR_ADDRESS             0x30000FFC
 #define CONFIG_SPL_MMC_SUPPORT
 #define CONFIG_SPL_MMC_MINIMAL
 #define CONFIG_SYS_MMC_U_BOOT_SIZE     (768 << 10)
-#define CONFIG_SYS_MMC_U_BOOT_DST      (0x00200000)
-#define CONFIG_SYS_MMC_U_BOOT_START    (0x00200000)
+#define CONFIG_SYS_MMC_U_BOOT_DST      (0x30000000)
+#define CONFIG_SYS_MMC_U_BOOT_START    (0x30000000)
 #define CONFIG_SYS_MMC_U_BOOT_OFFS     (260 << 10)
 #define CONFIG_SYS_LDSCRIPT    "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 #ifndef CONFIG_SPL_BUILD
@@ -269,6 +271,9 @@
 #define CPLD_LBMAP_DFLTBANK            0x40 /* BANK OR | BANK0 */
 #define CPLD_LBMAP_RESET               0xFF
 #define CPLD_LBMAP_SHIFT               0x03
+#ifdef CONFIG_T1042RDB_PI
+#define CPLD_DIU_SEL_DFP               0x80
+#endif
 
 #define CONFIG_SYS_CPLD_BASE   0xffdf0000
 #define CONFIG_SYS_CPLD_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_CPLD_BASE)
@@ -430,6 +435,24 @@
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
+#ifdef CONFIG_T1042RDB_PI
+/* Video */
+#define CONFIG_FSL_DIU_FB
+
+#ifdef CONFIG_FSL_DIU_FB
+#define CONFIG_FSL_DIU_CH7301
+#define CONFIG_SYS_DIU_ADDR    (CONFIG_SYS_CCSRBAR + 0x180000)
+#define CONFIG_VIDEO
+#define CONFIG_CMD_BMP
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+#endif
+#endif
+
 /* pass open firmware flat tree */
 #define CONFIG_OF_LIBFDT
 #define CONFIG_OF_BOARD_SETUP
@@ -457,11 +480,15 @@
 
 /* I2C bus multiplexer */
 #define I2C_MUX_PCA_ADDR                0x70
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define I2C_MUX_CH_DEFAULT      0x8
 #endif
 
 #ifdef CONFIG_T1042RDB_PI
+/* LDI/DVI Encoder for display */
+#define CONFIG_SYS_I2C_LDI_ADDR                0x38
+#define CONFIG_SYS_I2C_DVI_ADDR                0x75
+
 /*
  * RTC configuration
  */
@@ -479,6 +506,7 @@
 #define CONFIG_FSL_ESPI
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_BAR
 #define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_SPEED         10000000
 #define CONFIG_SF_DEFAULT_MODE          0
@@ -609,7 +637,7 @@
 #define CONFIG_SYS_DPAA_FMAN
 #define CONFIG_SYS_DPAA_PME
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_QE
 #define CONFIG_U_QE
 #endif
@@ -638,7 +666,7 @@
 #define CONFIG_SYS_FMAN_FW_ADDR                0xEFF00000
 #endif
 
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #if defined(CONFIG_SPIFLASH)
 #define CONFIG_SYS_QE_FW_ADDR          0x130000
 #elif defined(CONFIG_SDCARD)
@@ -662,7 +690,7 @@
 #endif
 
 #ifdef CONFIG_FMAN_ENET
-#ifdef CONFIG_T1040RDB
+#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB)
 #define CONFIG_SYS_SGMII1_PHY_ADDR             0x03
 #endif
 #define CONFIG_SYS_RGMII1_PHY_ADDR             0x01
@@ -764,13 +792,20 @@
 #define CONFIG_BAUDRATE        115200
 
 #define __USB_PHY_TYPE utmi
+#define RAMDISKFILE    "t104xrdb/ramdisk.uboot"
 
 #ifdef CONFIG_T1040RDB
 #define FDTFILE                "t1040rdb/t1040rdb.dtb"
-#define RAMDISKFILE    "t1040rdb/ramdisk.uboot"
-#elif CONFIG_T1042RDB_PI
-#define FDTFILE                "t1040rdb_pi/t1040rdb_pi.dtb"
-#define RAMDISKFILE    "t1040rdb_pi/ramdisk.uboot"
+#elif defined(CONFIG_T1042RDB_PI)
+#define FDTFILE                "t1042rdb_pi/t1042rdb_pi.dtb"
+#elif defined(CONFIG_T1042RDB)
+#define FDTFILE                "t1042rdb/t1042rdb.dtb"
+#endif
+
+#ifdef CONFIG_FSL_DIU_FB
+#define DIU_ENVIRONMENT "video-mode=fslfb:1024x768-32@60,monitor=dvi"
+#else
+#define DIU_ENVIRONMENT
 #endif
 
 #define        CONFIG_EXTRA_ENV_SETTINGS                               \
@@ -778,6 +813,7 @@
        "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) ";"\
        "usb2:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
        "netdev=eth0\0"                                         \
+       "video-mode=" __stringify(DIU_ENVIRONMENT) "\0"         \
        "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
        "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
        "tftpflash=tftpboot $loadaddr $uboot && "               \