#ifndef __CONFIG_CM_FX6_H
#define __CONFIG_CM_FX6_H
-#include <asm/arch/imx-regs.h>
-#include <config_distro_defaults.h>
#include "mx6_common.h"
/* Machine config */
-#define CONFIG_MX6
#define CONFIG_SYS_LITTLE_ENDIAN
#define CONFIG_MACH_TYPE 4273
-#define CONFIG_SYS_HZ 1000
-
-/* Display information on boot */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_TIMESTAMP
/* CMD */
-#include <config_cmd_default.h>
#define CONFIG_CMD_GREPENV
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
/* MMC */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_USDHC_NUM 3
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
/* Shell */
#define CONFIG_SYS_PROMPT "CM-FX6 # "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/* SPI flash */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
/* Environment */
-#define CONFIG_ENV_OVERWRITE
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_OFFSET (768 * 1024)
#define CONFIG_EXTRA_ENV_SETTINGS \
- "kernel=uImage-cm-fx6\0" \
+ "stdin=serial,usbkbd\0" \
+ "stdout=serial,vga\0" \
+ "stderr=serial,vga\0" \
+ "panel=HDMI\0" \
"autoload=no\0" \
+ "kernel=uImage-cm-fx6\0" \
+ "script=boot.scr\0" \
+ "dtb=cm-fx6.dtb\0" \
+ "bootm_low=18000000\0" \
"loadaddr=0x10800000\0" \
"fdtaddr=0x11000000\0" \
"console=ttymxc3,115200\0" \
"ethprime=FEC0\0" \
- "bootscr=boot.scr\0" \
- "bootm_low=18000000\0" \
"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
- "fdtfile=cm-fx6.dtb\0" \
"doboot=bootm ${loadaddr}\0" \
- "loadfdt=false\0" \
+ "doloadfdt=false\0" \
"setboottypez=setenv kernel zImage-cm-fx6;" \
"setenv doboot bootz ${loadaddr} - ${fdtaddr};" \
- "setenv loadfdt true;\0" \
+ "setenv doloadfdt true;\0" \
"setboottypem=setenv kernel uImage-cm-fx6;" \
"setenv doboot bootm ${loadaddr};" \
- "setenv loadfdt false;\0"\
- "run_eboot=echo Starting EBOOT ...; "\
- "mmc dev ${mmcdev} && " \
- "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
- "mmcdev=2\0" \
+ "setenv doloadfdt false;\0"\
"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
- "loadmmcbootscript=load mmc ${mmcdev} ${loadaddr} ${bootscr}\0" \
- "mmcbootscript=echo Running bootscript from mmc ...; "\
- "source ${loadaddr}\0" \
- "mmcargs=setenv bootargs console=${console} " \
- "root=${mmcroot} " \
- "${video}\0" \
- "mmcloadkernel=load mmc ${mmcdev} ${loadaddr} ${kernel}\0" \
- "mmcloadfdt=load mmc ${mmcdev} ${fdtaddr} ${fdtfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run mmcargs; " \
- "run doboot\0" \
- "satadev=0\0" \
"sataroot=/dev/sda2 rw rootwait\0" \
- "sataargs=setenv bootargs console=${console} " \
- "root=${sataroot} " \
- "${video}\0" \
- "loadsatabootscript=load sata ${satadev} ${loadaddr} ${bootscr}\0" \
- "satabootscript=echo Running bootscript from sata ...; " \
- "source ${loadaddr}\0" \
- "sataloadkernel=load sata ${satadev} ${loadaddr} ${kernel}\0" \
- "sataloadfdt=load sata ${satadev} ${fdtaddr} ${fdtfile}\0" \
- "sataboot=echo Booting from sata ...; "\
- "run sataargs; " \
- "run doboot\0" \
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} root=${mmcroot} " \
+ "${video}\0" \
+ "sataargs=setenv bootargs console=${console} root=${sataroot} " \
+ "${video}\0" \
"nandargs=setenv bootargs console=${console} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype} " \
"${video}\0" \
- "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
- "nandboot=echo Booting from nand ...; " \
- "run nandargs; " \
- "nand read ${loadaddr} 0 780000; " \
- "if ${loadfdt}; then " \
+ "nandboot=if run nandloadkernel; then " \
"run nandloadfdt;" \
- "fi; " \
- "run doboot\0" \
- "boot=mmc dev ${mmcdev}; " \
- "if mmc rescan; then " \
- "if run loadmmcbootscript; then " \
- "run mmcbootscript;" \
- "else " \
- "if run mmcloadkernel; then " \
- "if ${loadfdt}; then " \
- "run mmcloadfdt;" \
- "fi;" \
- "run mmcboot;" \
- "fi;" \
- "fi;" \
+ "run setboottypem;" \
+ "run storagebootcmd;" \
+ "run setboottypez;" \
+ "run storagebootcmd;" \
+ "fi;\0" \
+ "run_eboot=echo Starting EBOOT ...; "\
+ "mmc dev 2 && " \
+ "mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
+ "loadscript=load ${storagetype} ${storagedev} ${loadaddr} ${script};\0"\
+ "loadkernel=load ${storagetype} ${storagedev} ${loadaddr} ${kernel};\0"\
+ "loadfdt=load ${storagetype} ${storagedev} ${fdtaddr} ${dtb};\0" \
+ "bootscript=echo Running bootscript from ${storagetype} ...;" \
+ "source ${loadaddr};\0" \
+ "nandloadkernel=nand read ${loadaddr} 0 780000;\0" \
+ "nandloadfdt=nand read ${fdtaddr} 780000 80000;\0" \
+ "setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
+ "setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
+ "setupnandboot=setenv storagetype nand;\0" \
+ "setupusbboot=setenv storagetype usb; setenv storagedev 0;\0" \
+ "storagebootcmd=echo Booting from ${storagetype} ...;" \
+ "run ${storagetype}args; run doboot;\0" \
+ "trybootk=if run loadkernel; then " \
+ "if ${doloadfdt}; then " \
+ "run loadfdt;" \
"fi;" \
- "if sata init; then " \
- "if run loadsatabootscript; then " \
- "run satabootscript;" \
- "else "\
- "if run sataloadkernel; then " \
- "if ${loadfdt}; then " \
- "run sataloadfdt; " \
- "fi;" \
- "run sataboot;" \
- "fi;" \
- "fi;" \
+ "run storagebootcmd;" \
+ "fi;\0" \
+ "trybootsmz=if run loadscript; then " \
+ "run bootscript;" \
"fi;" \
- "run nandboot\0"
+ "run setboottypem;" \
+ "run trybootk;" \
+ "run setboottypez;" \
+ "run trybootk;\0"
#define CONFIG_BOOTCOMMAND \
- "run setboottypem; run boot"
+ "run setupmmcboot;" \
+ "mmc dev ${storagedev};" \
+ "if mmc rescan; then " \
+ "run trybootsmz;" \
+ "fi;" \
+ "run setupusbboot;" \
+ "if usb start; then "\
+ "if run loadscript; then " \
+ "run bootscript;" \
+ "fi;" \
+ "fi;" \
+ "run setupsataboot;" \
+ "if sata init; then " \
+ "run trybootsmz;" \
+ "fi;" \
+ "run setupnandboot;" \
+ "run nandboot;"
+
+#define CONFIG_PREBOOT "usb start"
/* SPI */
#define CONFIG_SPI
#define CONFIG_MXC_SPI
-#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SPI_FLASH_EON
#define CONFIG_SPI_FLASH_GIGADEVICE
#define CONFIG_NET_RETRY_COUNT 5
/* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
+#define CONFIG_SYS_STDIO_DEREGISTER
/* I2C */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_MXC_I2C3_SPEED 400000
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
-/* GPIO */
-#define CONFIG_MXC_GPIO
-
/* Boot */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_LOADADDR 0x10800000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
#define CONFIG_SERIAL_TAG
/* misc */
-#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_STACKSIZE (128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 800 /* 400 KB */
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
#define CONFIG_SPL_SPI_LOAD
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK 260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
#endif /* __CONFIG_CM_FX6_H */
projects / karo-tx-uboot.git / blobdiff