usb: kconfig: usb keyboard kconfig

[karo-tx-uboot.git] / include / configs / cm_fx6.h

diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 8faf5cddbfb36f623d69d50f222da2f51f2b2055..059004c7ea026898d4a24f87fb7c88379f73c70b 100644 (file)
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -11,46 +11,16 @@
 #ifndef __CONFIG_CM_FX6_H
 #define __CONFIG_CM_FX6_H
 
-#include <asm/arch/imx-regs.h>
-#include <config_distro_defaults.h>
 #include "mx6_common.h"
 
 /* Machine config */
 #define CONFIG_SYS_LITTLE_ENDIAN
 #define CONFIG_MACH_TYPE               4273
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-
-#define CONFIG_DM_GPIO
-#define CONFIG_CMD_GPIO
-
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN                (1 << 10)
-#endif
-
-/* Display information on boot */
-#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_TIMESTAMP
-
 /* CMD */
-#include <config_cmd_default.h>
 #define CONFIG_CMD_GREPENV
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_XIMG
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMLS
 
 /* MMC */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_USDHC_NUM       3
 #define CONFIG_SYS_FSL_ESDHC_ADDR      USDHC2_BASE_ADDR
 
@@ -76,22 +46,16 @@
 
 /* Shell */
 #define CONFIG_SYS_PROMPT      "CM-FX6 # "
-#define CONFIG_SYS_CBSIZE      1024
-#define CONFIG_SYS_MAXARGS     16
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_PBSIZE      (CONFIG_SYS_CBSIZE + \
                                        sizeof(CONFIG_SYS_PROMPT) + 16)
 
 /* SPI flash */
-#define CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_SF
 #define CONFIG_SF_DEFAULT_BUS          0
 #define CONFIG_SF_DEFAULT_CS           0
 #define CONFIG_SF_DEFAULT_SPEED                25000000
 #define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
 
 /* Environment */
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
@@ -102,6 +66,10 @@
 #define CONFIG_ENV_OFFSET              (768 * 1024)
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       "stdin=serial,usbkbd\0" \
+       "stdout=serial,vga\0" \
+       "stderr=serial,vga\0" \
+       "panel=HDMI\0" \
        "autoload=no\0" \
        "kernel=uImage-cm-fx6\0" \
        "script=boot.scr\0" \
@@ -189,10 +157,11 @@
        "run setupnandboot;" \
        "run nandboot;"
 
+#define CONFIG_PREBOOT         "usb start"
+
 /* SPI */
 #define CONFIG_SPI
 #define CONFIG_MXC_SPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_SPI_FLASH_EON
 #define CONFIG_SPI_FLASH_GIGADEVICE
@@ -229,19 +198,16 @@
 #define CONFIG_NET_RETRY_COUNT         5
 
 /* USB */
-#define CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
 #define CONFIG_USB_MAX_CONTROLLER_COUNT        2
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
+#define CONFIG_SYS_STDIO_DEREGISTER
 
 /* I2C */
-#define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_MXC_I2C3_SPEED      400000
 
@@ -258,24 +224,13 @@
 #define CONFIG_DWC_AHSATA_PORT_ID      0
 #define CONFIG_DWC_AHSATA_BASE_ADDR    SATA_ARB_BASE_ADDR
 
-/* GPIO */
-#define CONFIG_MXC_GPIO
-
 /* Boot */
-#define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_LOADADDR                        0x10800000
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
 #define CONFIG_SYS_BOOTMAPSZ           (8 << 20)
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
 #define CONFIG_SERIAL_TAG
 
 /* misc */
-#define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_STACKSIZE                       (128 * 1024)
-#define CONFIG_SYS_MALLOC_LEN                  (2 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN                  (10 * 1024 * 1024)
 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS     800 /* 400 KB */
 #define CONFIG_OF_BOARD_SETUP
 
@@ -290,4 +245,23 @@
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 #define CONFIG_SPL_SPI_LOAD
 
+/* Display */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_IMX_HDMI
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_VIDEO_SW_CURSOR
+
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SOURCE
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_BMP_RLE8
+
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_VIDEO_BMP_LOGO
+
 #endif /* __CONFIG_CM_FX6_H */