* Patches by Robert Schwebel, 06 Mar 2003:

[karo-tx-uboot.git] / include / configs / csb226.h

diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index b6c7302f5ef9cd903acb1aa12a3c3f2b4f712bd6..2806b6dd0fc14de0eed5b464a2a039bc4cc8b078 100644 (file)
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -55,12 +55,13 @@
 /*
  * select serial console configuration
  */
-#define CONFIG_FFUART          1       /* we use FFUART on CSB226 */
+#define CONFIG_FFUART          1       /* we use FFUART on CSB226          */
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BAUDRATE                19200
+#undef  CONFIG_MISC_INIT_R             /* not used yet                     */
 
 #define CONFIG_COMMANDS                (CONFIG_CMD_DFL & ~CFG_CMD_NET)
 
@@ -68,7 +69,7 @@
 #include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY       3
-#define CONFIG_BOOTARGS                "root=/dev/nfs ip=bootp console=ttyS0,19200"
+#define CONFIG_BOOTARGS                "console=ttyS0,19200 ip=dhcp root=/dev/nfs, ether=0,0x08000000,eth0"
 #define CONFIG_ETHADDR         FF:FF:FF:FF:FF:FF
 #define CONFIG_NETMASK         255.255.255.0
 #define CONFIG_IPADDR          192.168.1.56
@@ -76,8 +77,10 @@
 #define CONFIG_BOOTCOMMAND     "bootm 0x40000"
 #define CONFIG_SHOW_BOOT_PROGRESS
 
+#define CONFIG_CMDLINE_TAG     1
+
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
+#define CONFIG_KGDB_BAUDRATE   19200           /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif
 
@@ -90,7 +93,7 @@
  * used for the RAM copy of the uboot code
  *
  */
-#define CFG_MALLOC_LEN         (CFG_ENV_SIZE + 128*1024)
+#define CFG_MALLOC_LEN         (128*1024)
 
 #define CFG_LONGHELP                           /* undef to save memory         */
 #define CFG_PROMPT             "uboot> "       /* Monitor Command Prompt       */
@@ -104,7 +107,7 @@
 
 #undef  CFG_CLKS_IN_HZ          /* everything, incl board info, in Hz */
 
-#define CFG_LOAD_ADDR           0xa7fe0000      /* default load address */
+#define CFG_LOAD_ADDR           0xa3000000     /* default load address */
                                                /* RS: where is this documented? */
                                                /* RS: is this where U-Boot is  */
                                                /* RS: relocated to in RAM?      */