tpm: Drop two unused options

[karo-tx-uboot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 380a46feb88cc2a92dd5eb362c60386400911a1c..fb5ee0d39a07e9ed12cb2ec30092cdd0be1c5a8d 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -14,17 +14,16 @@
 #include "exynos-common.h"
 
 #define CONFIG_SYS_CACHELINE_SIZE      64
-#define CONFIG_ARCH_EARLY_INIT_R
 #define CONFIG_EXYNOS_SPL
 
-/* Allow tracing to be enabled */
+#ifdef FTRACE
 #define CONFIG_TRACE
 #define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
 #define CONFIG_TRACE_EARLY
 #define CONFIG_TRACE_EARLY_ADDR                0x50000000
-
+#endif
 
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
@@ -48,24 +47,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_CONSOLE_MUX
 
-/* Enable keyboard */
-#define CONFIG_CROS_EC         /* CROS_EC protocol */
-#define CONFIG_CROS_EC_KEYB    /* CROS_EC keyboard input */
-#define CONFIG_CMD_CROS_EC
-#define CONFIG_KEYBOARD
-
-/* Console configuration */
-#define EXYNOS_DEVICE_SETTINGS \
-               "stdin=serial,cros-ec-keyb\0" \
-               "stdout=serial,lcd\0" \
-               "stderr=serial,lcd\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       EXYNOS_DEVICE_SETTINGS
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
@@ -77,8 +58,6 @@
 #define CONFIG_TPM
 #define CONFIG_CMD_TPM
 #define CONFIG_TPM_TIS_I2C
-#define CONFIG_TPM_TIS_I2C_BUS_NUMBER  3
-#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR  0x20
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
@@ -86,12 +65,12 @@
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
 
 /* specific .lds file */
 #define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
 
-/* Miscellaneous configurable options */
-#define CONFIG_DEFAULT_CONSOLE         "console=ttySAC1,115200n8\0"
 /* Boot Argument Buffer Size */
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
@@ -139,33 +118,21 @@
 #define CONFIG_BL1_OFFSET      (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET      (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
 
-/* Store environment at the end of a 4 MB SPI flash */
-#define FLASH_SIZE             (0x4 << 20)
-#define CONFIG_ENV_OFFSET      (FLASH_SIZE - CONFIG_BL2_SIZE)
-
 /* U-boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
 
-#define CONFIG_SPI_BOOTING
 #define EXYNOS_COPY_SPI_FNPTR_ADDR     0x02020058
 #define SPI_FLASH_UBOOT_POS    (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 #define CONFIG_I2C_EDID
 
 /* SPI */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_ENV_SPI_BASE    0x12D30000
-
 #ifdef CONFIG_SPI_FLASH
 #define CONFIG_EXYNOS_SPI
 #define CONFIG_CMD_SF
@@ -174,8 +141,6 @@
 #define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS    5
-#define CONFIG_OF_SPI
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
@@ -185,11 +150,6 @@
 #define CONFIG_ENV_SPI_MAX_HZ  50000000
 #endif
 
-/* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_POWER_TPS65090
-
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_SMC911X
@@ -198,12 +158,6 @@
 #define CONFIG_ENV_SROM_BANK           1
 #endif /*CONFIG_CMD_NET*/
 
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
 /* SHA hashing */
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
@@ -213,10 +167,19 @@
 /* Enable Time Command */
 #define CONFIG_CMD_TIME
 
-#define CONFIG_CMD_BOOTZ
-
 #define CONFIG_CMD_GPIO
 
+/* USB */
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
 #define EXYNOS_COPY_USB_FNPTR_ADDR     0x02020070
@@ -227,4 +190,40 @@
 #define CONFIG_FIT
 #define CONFIG_FIT_BEST_MATCH
 
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 0) \
+       func(PXE, pxe, na) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef MEM_LAYOUT_ENV_SETTINGS
+/* 2GB RAM, bootm size of 256M, load scripts after that */
+#define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
+       "kernel_addr_r=0x42000000\0" \
+       "fdt_addr_r=0x43000000\0" \
+       "ramdisk_addr_r=0x43300000\0" \
+       "scriptaddr=0x50000000\0" \
+       "pxefile_addr_r=0x51000000\0"
+#endif
+
+#ifndef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+       "stdin=serial\0" \
+       "stdout=serial\0" \
+       "stderr=serial\0"
+#endif
+
+#ifndef EXYNOS_FDTFILE_SETTING
+#define EXYNOS_FDTFILE_SETTING
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       EXYNOS_DEVICE_SETTINGS \
+       EXYNOS_FDTFILE_SETTING \
+       MEM_LAYOUT_ENV_SETTINGS \
+       BOOTENV
+
 #endif /* __CONFIG_EXYNOS5_COMMON_H */