kconfig: add config option for shell prompt

[karo-tx-uboot.git] / include / configs / imx31_phycore.h

diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h
index 3153eb5b396fd94e46153287d6331425373b57c0..ed411a3053a3706809dd58f4093be07d540b1ae0 100644 (file)
--- a/include/configs/imx31_phycore.h
+++ b/include/configs/imx31_phycore.h
@@ -6,23 +6,7 @@
  *
  * Configuration settings for the phyCORE-i.MX31 board.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -31,11 +15,10 @@
 #include <asm/arch/imx-regs.h>
 
 /* High Level Configuration Options */
-#define CONFIG_ARM1136                 /* This is an arm1136 CPU core */
-#define CONFIG_MX31                    /* in a mx31 */
-#define CONFIG_MX31_HCLK_FREQ  26000000
 #define CONFIG_MX31_CLK32      32000
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -52,11 +35,10 @@
  * Hardware drivers
  */
 
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_MX31_PORT2
-#define CONFIG_SYS_I2C_SPEED           100000
-#define CONFIG_SYS_I2C_SLAVE           0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
+#define CONFIG_SYS_I2C_CLK_OFFSET      I2C2_CLK_OFFSET
 
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE
@@ -65,14 +47,10 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX      1
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 /***********************************************************
  * Command definition
  ***********************************************************/
-
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
@@ -123,7 +101,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
-#define CONFIG_SYS_PROMPT              "uboot> "
 /* Console I/O Buffer Size */
 #define CONFIG_SYS_CBSIZE              256
 /* Print Buffer Size */
@@ -139,17 +116,8 @@
 
 #define CONFIG_SYS_LOAD_ADDR           0 /* default load address */
 
-#define CONFIG_SYS_HZ                  1000
-
 #define CONFIG_CMDLINE_EDITING
 
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024) /* regular stack */
-
 /*
  * Physical Memory Map
  */