karo: fdt: fix panel-dpi support

[karo-tx-uboot.git] / include / configs / ls1021atwr.h

diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 88bdd061092ddc4dd638e0b3f1eba1cb0f32fe87..45146f27f57dbadd3526587bbc98ec64d2a35b38 100644 (file)
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -7,8 +7,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_cmd_default.h>
 
+#define CONFIG_ARMV7_PSCI
 
 #define CONFIG_SYS_GENERIC_BOARD
 
@@ -17,6 +17,10 @@
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DEEP_SLEEP
+#ifdef CONFIG_DEEP_SLEEP
+#define CONFIG_SILENT_CONSOLE
+#endif
 
 /*
  * Size of malloc() pool
@@ -26,6 +30,44 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       OCRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       OCRAM_SIZE
 
+/*
+ * USB
+ */
+
+/*
+ * EHCI Support - disbaled by default as
+ * there is no signal coming out of soc on
+ * this board for this controller. However,
+ * the silicon still has this controller,
+ * and anyone can use this controller by
+ * taking signals out on their board.
+ */
+
+/*#define CONFIG_HAS_FSL_DR_USB*/
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#endif
+
+/* XHCI Support - enabled by default */
+#define CONFIG_HAS_FSL_XHCI_USB
+
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_XHCI_DWC3
+#define CONFIG_USB_XHCI
+#define CONFIG_USB_MAX_CONTROLLER_COUNT        1
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
+#endif
+
+#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_XHCI_USB)
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_EXT2
+#endif
+
 /*
  * Generic Timer Definitions
  */
@@ -56,6 +98,10 @@
 #define DDR_DDR_ZQ_CNTL                        0x89080600
 #define DDR_CS0_CONFIG_2               0
 #define DDR_SDRAM_CFG_MEM_EN           0x80000000
+#define SDRAM_CFG2_D_INIT              0x00000010
+#define DDR_CDR2_VREF_TRAIN_EN         0x00000080
+#define SDRAM_CFG2_FRC_SR              0x80000000
+#define SDRAM_CFG_BI                   0x00000001
 
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1021atwr/ls102xa_pbi.cfg
@@ -82,7 +128,8 @@
 #define CONFIG_SPL_PAD_TO              0x1c000
 #define CONFIG_SYS_TEXT_BASE           0x82000000
 
-#define CONFIG_SYS_SPL_MALLOC_START    0x80200000
+#define CONFIG_SYS_SPL_MALLOC_START    (CONFIG_SYS_TEXT_BASE + \
+               CONFIG_SYS_MONITOR_LEN)
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000
 #define CONFIG_SPL_BSS_START_ADDR      0x80100000
 #define CONFIG_SPL_BSS_MAX_SIZE                0x80000
@@ -251,16 +298,20 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
-/* QSPI */
+/* SPI */
 #ifdef CONFIG_QSPI_BOOT
+/* QSPI */
 #define CONFIG_FSL_QSPI
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
 #define FSL_QSPI_FLASH_NUM             2
+#define CONFIG_SPI_FLASH_STMICRO
 
+/* DM SPI */
+#if defined(CONFIG_FSL_DSPI) || defined(CONFIG_FSL_QSPI)
 #define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_DM_SPI_FLASH
+#endif
 #endif
 
 /*
@@ -342,9 +393,7 @@
 #define CONFIG_SYS_PCIE_MEM_SIZE       0x08000000      /* 128M */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP
-#define CONFIG_E1000
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_CMD_PCI
 #endif
@@ -356,19 +405,12 @@
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
-#ifdef CONFIG_QSPI_BOOT
-#undef CONFIG_CMD_IMLS
-#else
-#define CONFIG_CMD_IMLS
-#endif
-
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN
 #define CONFIG_LS102XA_NS_ACCESS
 #define CONFIG_SMP_PEN_ADDR            0x01ee0200
 #define CONFIG_TIMER_CLK_FREQ          12500000
-#define CONFIG_ARMV7_SECURE_BASE       OCRAM_BASE_S_ADDR
 
 #define CONFIG_HWCONFIG
 #define HWCONFIG_BUFFER_SIZE           128
@@ -400,7 +442,6 @@
 #define CONFIG_SYS_MAXARGS             16      /* max number of command args */
 #define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_ENV_EXISTS
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_MEMINFO
 #define CONFIG_CMD_MEMTEST
@@ -464,6 +505,7 @@
 
 #ifdef CONFIG_SECURE_BOOT
 #define CONFIG_CMD_BLOB
+#include <asm/fsl_secure_boot.h>
 #endif
 
 #endif