* Copyright (c) 2012 Michael Walle
* Michael Walle <michael@walle.cc>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_LSXL_H
#define _CONFIG_LSXL_H
+#define CONFIG_SYS_GENERIC_BOARD
+
/*
* Version number information
*/
#if defined(CONFIG_LSCHLV2)
#define CONFIG_IDENT_STRING " LS-CHLv2"
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lschl.cfg
#define CONFIG_MACH_TYPE 3006
#define CONFIG_SYS_TCLK 166666667 /* 166 MHz */
#elif defined(CONFIG_LSXHL)
#define CONFIG_IDENT_STRING " LS-XHL"
-#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
+#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-lsxhl.cfg
#define CONFIG_MACH_TYPE 2663
/* CONFIG_SYS_TCLK is 200000000 by default */
#else
* General configuration options
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD /* SOC Family Name */
#define CONFIG_KW88F6281 /* SOC Name */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_MISC_INIT_R
#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_RANDOM_MACADDR
#define CONFIG_KIRKWOOD_GPIO
#define CONFIG_OF_LIBFDT
/*
* Commands configuration
*/
-#include <config_cmd_default.h>
+#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
+#define CONFIG_CMD_FS_GENERIC
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION
*/
#include "mv-common.h"
+/* loading initramfs images without uimage header */
+#define CONFIG_SUPPORT_RAW_INITRD
+
/* ST M25P40 */
#undef CONFIG_SPI_FLASH_MACRONIX
#define CONFIG_SPI_FLASH_STMICRO
#undef CONFIG_SYS_PROMPT
-#define CONFIG_SYS_PROMPT "=> "
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
/*
#define CONFIG_LOADADDR 0x00800000
#define CONFIG_BOOTCOMMAND "run bootcmd_${bootsource}"
#define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/sda2"
+
+#if defined(CONFIG_LSXHL)
+#define CONFIG_FDTFILE "kirkwood-lsxhl.dtb"
+#elif defined(CONFIG_LSCHLV2)
+#define CONFIG_FDTFILE "kirkwood-lschlv2.dtb"
+#else
+#error "Unsupported board"
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
- "bootsource=hdd\0" \
+ "bootsource=legacy\0" \
"hdpart=0:1\0" \
- "bootcmd_net=bootp 0x00100000 uImage " \
- "&& tftpboot 0x00800000 uInitrd " \
- "&& bootm 0x00100000 0x00800000\0" \
+ "kernel_addr=0x00800000\0" \
+ "ramdisk_addr=0x01000000\0" \
+ "fdt_addr=0x00ff0000\0" \
+ "bootcmd_legacy=ide reset " \
+ "&& load ide ${hdpart} ${kernel_addr} /uImage.buffalo " \
+ "&& load ide ${hdpart} ${ramdisk_addr} /initrd.buffalo "\
+ "&& bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "bootcmd_net=bootp ${kernel_addr} vmlinuz " \
+ "&& tftpboot ${ramdisk_addr} initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
+ "&& tftpboot ${fdt_addr} " CONFIG_FDTFILE " " \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_hdd=ide reset " \
- "&& ext2load ide ${hdpart} 0x00100000 /uImage " \
- "&& ext2load ide ${hdpart} 0x00800000 /uInitrd " \
- "&& bootm 0x00100000 0x00800000\0" \
+ "&& load ide ${hdpart} ${kernel_addr} /vmlinuz " \
+ "&& load ide ${hdpart} ${ramdisk_addr} /initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
+ "&& load ide ${hdpart} ${fdt_addr} /dtb " \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_usb=usb start " \
- "&& fatload usb 0:1 0x00100000 /uImage " \
- "&& fatload usb 0:1 0x00800000 /uInitrd " \
- "&& bootm 0x00100000 0x00800000\0" \
+ "&& load usb 0:1 ${kernel_addr} /vmlinuz " \
+ "&& load usb 0:1 ${ramdisk_addr} /initrd.img " \
+ "&& setenv ramdisk_len ${filesize} " \
+ "&& load usb 0:1 ${fdt_addr} " CONFIG_FDTFILE " " \
+ "&& bootz ${kernel_addr} " \
+ "${ramdisk_addr}:${ramdisk_len} ${fdt_addr}\0" \
"bootcmd_rescue=run config_nc_dhcp; run nc\0" \
"eraseenv=sf probe 0 " \
"&& sf erase " __stringify(CONFIG_ENV_OFFSET) \
"config_nc_dhcp=setenv autoload_old ${autoload}; " \
"setenv autoload no " \
"&& bootp " \
- "&& setenv ncip ${serverip} " \
+ "&& setenv ncip " \
"&& setenv autoload ${autoload_old}; " \
"setenv autoload_old\0" \
"standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \
"setenv ncip; setenv gatewayip; setenv ethact; " \
"setenv bootfile; setenv dnsip; " \
- "setenv bootsource hdd; run ser\0" \
+ "setenv bootsource legacy; run ser\0" \
"restore_env=run standard_env; saveenv; reset\0" \
"ser=setenv stdin serial; setenv stdout serial; " \
"setenv stderr serial\0" \
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXDEVICE 1
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
+#define CONFIG_SYS_64BIT_LBA
#endif
#endif /* _CONFIG_LSXL_H */
projects / karo-tx-uboot.git / blobdiff