[FIX] change command handling and removing code violation

[karo-tx-uboot.git] / include / configs / ml401.h

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 48291e89da083848f7880409408c51dc13121676..b32043850e617bb5bab5ea44ed0f996da3652059 100644 (file)
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -32,7 +32,7 @@
 #define        CONFIG_ML401            1       /* ML401 Board */
 
 /* uart */
-#define CONFIG_XILINX_UARTLITE
+#define        CONFIG_XILINX_UARTLITE
 #define        CONFIG_SERIAL_BASE      XILINX_UART_BASEADDR
 #define        CONFIG_BAUDRATE         XILINX_UART_BAUDRATE
 #define        CFG_BAUDRATE_TABLE      { CONFIG_BAUDRATE }
@@ -59,6 +59,7 @@
 #define        CFG_TIMER_0_IRQ         XILINX_TIMER_IRQ
 #define        FREQUENCE               XILINX_CLOCK_FREQ
 #define        CFG_TIMER_0_PRELOAD     ( FREQUENCE/1000 )
+#define        CONFIG_XILINX_CLOCK_FREQ        XILINX_CLOCK_FREQ
 
 /* FSL */
 #define        CFG_FSL_2
@@ -87,7 +88,7 @@
  * 0x11FB_F000 CFG_MONITOR_BASE
  *                                     MONITOR_CODE    256kB   Env
  * 0x13FF_F000 CFG_GBL_DATA_OFFSET
- *                                     GLOBAL_DATA     4kB     bd, gd
+ *                                     GLOBAL_DATA     4kB     bd, gd
  * 0x1400_0000 CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -100,7 +101,7 @@
 /* global pointer */
 #define        CFG_GBL_DATA_SIZE       0x1000  /* size of global data */
 /* start of global data */
-#define        CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define        CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define        SIZE                    0x40000
@@ -146,6 +147,16 @@
        #define CFG_FLASH_PROTECTION            /* hardware flash protection */
 #endif /* !FLASH */
 
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+       #define CONFIG_SYSTEMACE
+       /* #define DEBUG_SYSTEMACE */
+       #define SYSTEMACE_CONFIG_FPGA
+       #define CFG_SYSTEMACE_BASE      XILINX_SYSACE_BASEADDR
+       #define CFG_SYSTEMACE_WIDTH     XILINX_SYSACE_MEM_WIDTH
+       #define CONFIG_DOS_PARTITION
+#endif
+
 /*
  * BOOTP options
  */
@@ -154,28 +165,21 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+       #define CONFIG_CMD_EXT2
+       #define CONFIG_CMD_FAT
+#endif
 
 #if defined(FLASH)
        #define CONFIG_CMD_ECHO
@@ -187,6 +191,8 @@
                #define CONFIG_CMD_ENV
                #define CONFIG_CMD_SAVES
        #endif
+#else
+       #undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -211,24 +217,16 @@
 #define        CONFIG_BOOTDELAY        30
 #define        CONFIG_BOOTARGS         "root=romfs"
 #define        CONFIG_HOSTNAME         "ml401"
-#define        CONFIG_BOOTCOMMAND      "base 0;tftp 11000000 image.img;bootm"
+#define        CONFIG_BOOTCOMMAND      "base 0;tftp 11000000 image.img;bootm"
 #define        CONFIG_IPADDR           192.168.0.3
-#define        CONFIG_SERVERIP         192.168.0.5
-#define        CONFIG_GATEWAYIP        192.168.0.1
+#define        CONFIG_SERVERIP         192.168.0.5
+#define        CONFIG_GATEWAYIP        192.168.0.1
 #define        CONFIG_ETHADDR          00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define        CFG_USR_EXCEP   /* user exception */
 #define CFG_HZ 1000
 
-/* system ace */
-#define        CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define        SYSTEMACE_CONFIG_FPGA
-#define        CFG_SYSTEMACE_BASE      XILINX_SYSACE_BASEADDR
-#define        CFG_SYSTEMACE_WIDTH     XILINX_SYSACE_MEM_WIDTH
-#define        CONFIG_DOS_PARTITION
-
 #define        CONFIG_PREBOOT          "echo U-BOOT for ML401;setenv preboot;echo"
 
 #define        CONFIG_EXTRA_ENV_SETTINGS       "unlock=yes\0" /* hardware flash protection */\