kgdb: configs: remove obsolete CONFIG_KGDB_SER_INDEX

[karo-tx-uboot.git] / include / configs / mx1ads.h

diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 0643312baf665fd1883c488135fb07446ea90841..12667c57c137522b14b7430b57c1dc45057732f1 100644 (file)
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -9,20 +9,7 @@
  *
  * This is the Configuration setting for Motorola MX1ADS board
  *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -35,7 +22,6 @@
 #define CONFIG_ARM920T         1       /* This is an ARM920T Core              */
 #define CONFIG_IMX             1       /* It's a Motorola MC9328 SoC           */
 #define CONFIG_MX1ADS          1       /* on a Motorola MX1ADS Board           */
-#undef CONFIG_USE_IRQ                  /* we don't need IRQ/FIQ stuff          */
 
 /*
  * Select serial console configuration
@@ -45,7 +31,7 @@
 /* #define _CONFIG_UART2 */            /* internal uart 2 */
 /* #define CONFIG_SILENT_CONSOLE */    /* use this to disable output */
 
-#define BOARD_LATE_INIT                1
+#define CONFIG_BOARD_LATE_INIT
 #define USE_920T_MMU           1
 
 #if 0
@@ -100,8 +86,6 @@
 
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
-                                               /* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */
 #endif
 
 /*
@@ -109,7 +93,6 @@
  */
 
 #define CONFIG_SYS_HUSH_PARSER         1
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 
 #define CONFIG_SYS_LONGHELP                            /* undef to save memory         */
 
@@ -129,24 +112,9 @@
 #define CONFIG_SYS_MEMTEST_END         0x0AF00000      /* 63 MB in DRAM        */
 
 #define CONFIG_SYS_LOAD_ADDR           0x08800000      /* default load address */
-/*#define      CONFIG_SYS_HZ                   1000 */
 #define CONFIG_SYS_HZ                  3686400
 #define CONFIG_SYS_CPUSPEED            0x141
 
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128*1024)      /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ   (4*1024)        /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ   (4*1024)        /* FIQ stack */
-#endif
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  */