Merge remote-tracking branch 'u-boot-imx/master'

[karo-tx-uboot.git] / include / configs / nitrogen6x.h

diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h
index 39d5bb34bb2995928a5bb686028c3d183218b812..6d379ed7ad30eb1ea68c8b03c9099301e764974d 100644 (file)
--- a/include/configs/nitrogen6x.h
+++ b/include/configs/nitrogen6x.h
@@ -32,6 +32,7 @@
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_MISC_INIT_R
 #define CONFIG_MXC_GPIO
+#define CONFIG_CMD_GPIO
 #define CONFIG_CI_UDC
 #define CONFIG_USBD_HS
 #define CONFIG_USB_GADGET_DUALSPEED
@@ -63,6 +64,7 @@
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_I2C_EDID
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -75,6 +77,8 @@
 #define CONFIG_GENERIC_MMC
 #define CONFIG_BOUNCE_BUFFER
 #define CONFIG_CMD_EXT2
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
 
@@ -122,6 +126,8 @@
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET       /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS   0
+#define CONFIG_USB_KEYBOARD
+#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 
 /* Miscellaneous commands */
 #define CONFIG_CMD_BMODE
@@ -137,7 +143,6 @@
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_LOGO
 #define CONFIG_IPUV3_CLK 260000000
 #define CONFIG_CMD_HDMIDETECT
 #define CONFIG_CONSOLE_MUX
@@ -173,7 +178,14 @@
 #define CONFIG_DRIVE_MMC
 #endif
 
-#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
+#ifdef CONFIG_USB_STORAGE
+#define CONFIG_DRIVE_USB "usb "
+#else
+#define CONFIG_DRIVE_USB
+#endif
+
+#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
+#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 
 #if defined(CONFIG_SABRELITE)
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -186,7 +198,7 @@
        "fdt_addr=0x18000000\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
-       "mmcdev=0\0" \
+       "mmcdevs=0 1\0" \
        "mmcpart=1\0" \
        "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
        "mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -238,47 +250,71 @@
                "fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
-          "mmc dev ${mmcdev}; if mmc rescan; then " \
-                  "if run loadbootscript; then " \
-                          "run bootscript; " \
-                  "else " \
-                          "if run loaduimage; then " \
-                                  "run mmcboot; " \
-                          "else run netboot; " \
-                          "fi; " \
-                  "fi; " \
-          "else run netboot; fi"
+       "for mmcdev in ${mmcdevs}; do " \
+               "mmc dev ${mmcdev}; " \
+               "if mmc rescan; then " \
+                       "if run loadbootscript; then " \
+                               "run bootscript; " \
+                       "else " \
+                               "if run loaduimage; then " \
+                                       "run mmcboot; " \
+                               "fi; " \
+                       "fi; " \
+               "fi; " \
+       "done; " \
+       "run netboot; "
 #else
 #define CONFIG_EXTRA_ENV_SETTINGS \
+       "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
+       "umsdevs=" CONFIG_UMSDEVS "\0" \
        "console=ttymxc1\0" \
        "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
                "sf erase 0xc0000 0x2000 && " \
                "echo restored environment to factory default ; fi\0" \
-       "bootcmd=for dtype in " CONFIG_DRIVE_TYPES \
+       "bootcmd=for dtype in ${bootdevs}" \
                "; do " \
+                       "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
+                               "usb start ;" \
+                       "fi; " \
                        "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
-                               "for fs in fat ext2 ; do " \
-                                       "${fs}load " \
-                                               "${dtype} ${disk}:1 " \
-                                               "10008000 " \
-                                               "/6x_bootscript" \
-                                               "&& source 10008000 ; " \
-                               "done ; " \
+                               "load " \
+                                       "${dtype} ${disk}:1 " \
+                                       "10008000 " \
+                                       "/6x_bootscript" \
+                                       "&& source 10008000 ; " \
                        "done ; " \
                "done; " \
                "setenv stdout serial,vga ; " \
                "echo ; echo 6x_bootscript not found ; " \
                "echo ; echo serial console at 115200, 8N1 ; echo ; " \
                "echo details at http://boundarydevices.com/6q_bootscript ; " \
-               "setenv stdout serial\0" \
-       "upgradeu=for dtype in " CONFIG_DRIVE_TYPES \
+               "setenv stdout serial;" \
+               "setenv stdin serial,usbkbd;" \
+               "for dtype in ${umsdevs} ; do " \
+                       "if itest.s sata == ${dtype}; then " \
+                               "initcmd='sata init' ;" \
+                       "else " \
+                               "initcmd='mmc rescan' ;" \
+                       "fi; " \
+                       "for disk in 0 1 ; do " \
+                               "if $initcmd && $dtype dev $disk ; then " \
+                                       "setenv stdout serial,vga; " \
+                                       "echo expose ${dtype} ${disk} " \
+                                               "over USB; " \
+                                       "ums 0 $dtype $disk ;" \
+                               "fi; " \
+               "       done; " \
+               "done ;" \
+               "setenv stdout serial,vga; " \
+               "echo no block devices found;" \
+               "\0" \
+       "initrd_high=0xffffffff\0" \
+       "upgradeu=for dtype in ${bootdevs}" \
                "; do " \
                "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
-                    "for fs in fat ext2 ; do " \
-                               "${fs}load ${dtype} ${disk}:1 10008000 " \
-                                       "/6x_upgrade " \
-                                       "&& source 10008000 ; " \
-                       "done ; " \
+                       "load ${dtype} ${disk}:1 10008000 " \
+                               "/6x_upgrade " \
+                               "&& source 10008000 ; " \
                "done ; " \
        "done\0" \
 
@@ -292,7 +328,7 @@
 
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS            16
+#define CONFIG_SYS_MAXARGS            48
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 
 #define CONFIG_SYS_MEMTEST_START       0x10000000
@@ -349,6 +385,7 @@
 #define CONFIG_CMD_BMP
 
 #define CONFIG_CMD_TIME
+#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_ALT_MEMTEST
 
 #define CONFIG_CMD_BOOTZ
@@ -365,4 +402,22 @@
 #define CONFIG_PCIE_IMX
 #endif
 
+#define CONFIG_CMD_ELF
+
+#define CONFIG_USB_GADGET
+#define CONFIG_CMD_USB_MASS_STORAGE
+#define CONFIG_USB_GADGET_MASS_STORAGE
+#define CONFIG_USBDOWNLOAD_GADGET
+#define CONFIG_USB_GADGET_VBUS_DRAW    2
+
+/* Netchip IDs */
+#define CONFIG_G_DNL_VENDOR_NUM 0x0525
+#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
+#define CONFIG_G_DNL_MANUFACTURER "Boundary"
+
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000
+
 #endif        /* __CONFIG_H */