]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - include/configs/nokia_rx51.h
arm/rpi: Enable dcache
[karo-tx-uboot.git] / include / configs / nokia_rx51.h
index e0c0fac8e1935926158e5019a6500d0f57975c81..7ec9965a46401adbd5e7ea138848c84bcfbaa0ff 100644 (file)
  */
 
 #define CONFIG_OMAP                    /* in a TI OMAP core */
-#define CONFIG_OMAP34XX                        /* which is a 34XX */
 #define CONFIG_OMAP3430                        /* which is in a 3430 */
 #define CONFIG_OMAP3_RX51              /* working with RX51 */
 #define CONFIG_SYS_L2CACHE_OFF         /* pretend there is no L2 CACHE */
 #define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+/* Common ARM Erratas */
+#define CONFIG_ARM_ERRATA_454179
+#define CONFIG_ARM_ERRATA_430973
+#define CONFIG_ARM_ERRATA_621766
 
 #define CONFIG_MACH_TYPE               MACH_TYPE_NOKIA_RX51
 
@@ -42,7 +46,7 @@
 #define CONFIG_SDRC                    /* The chip has SDRC controller */
 
 #include <asm/arch/cpu.h>              /* get chip and board defs */
-#include <asm/arch/omap3.h>
+#include <asm/arch/omap.h>
 #include <asm/arch/mem.h>
 #include <linux/stringify.h>
 
 #define CONFIG_DOS_PARTITION
 
 /* USB */
-#define CONFIG_MUSB_UDC
-#define CONFIG_MUSB_HDC
+#define CONFIG_USB_MUSB_UDC
+#define CONFIG_USB_MUSB_HCD
 #define CONFIG_USB_OMAP3
 #define CONFIG_TWL4030_USB
 
 #define CONFIG_SYS_NO_FLASH
 
 /* commands to include */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_EXT2                        /* EXT2 Support */
 #define CONFIG_CMD_EXT4                        /* EXT4 Support */
 #define CONFIG_CMD_FAT                 /* FAT support */
 
 #endif
 
-/* commands not needed from config_cmd_default.h */
-#undef CONFIG_CMD_FPGA                 /* FPGA configuration Support */
-#undef CONFIG_CMD_IMI                  /* iminfo */
-#undef CONFIG_CMD_NET                  /* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS                  /* NFS support */
-#undef CONFIG_CMD_SAVEENV              /* saveenv */
-#undef CONFIG_CMD_SETGETDCR            /* DCR support on 4xx */
-
 #define CONFIG_OMAP3_SPI
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_OMAP24_I2C_SPEED    100000
 
 #ifdef ONENAND_SUPPORT
 
-#define PISMO1_NAND_SIZE               GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE               GPMC_SIZE_128M
 #define CONFIG_SYS_ONENAND_BASE                ONENAND_MAP
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define VIDEO_TSTC_FCT                 rx51_kp_tstc
 #define VIDEO_GETC_FCT                 rx51_kp_getc
 #ifndef __ASSEMBLY__
+struct stdio_dev;
 int rx51_kp_init(void);
-int rx51_kp_tstc(void);
-int rx51_kp_getc(void);
+int rx51_kp_tstc(struct stdio_dev *sdev);
+int rx51_kp_getc(struct stdio_dev *sdev);
 #endif
 
 #ifndef MTDPARTS_DEFAULT
@@ -394,7 +387,6 @@ int rx51_kp_getc(void);
        "echo"
 
 #define CONFIG_BOOTDELAY 30
-#define CONFIG_AUTOBOOT_KEYED
 #define CONFIG_MENU
 #define CONFIG_MENU_SHOW