kconfig: add config option for shell prompt

[karo-tx-uboot.git] / include / configs / s5pc210_universal.h

diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h
index 2da887109d985a0d0d91c11c0c05c73ef0f2219c..35fef2b244a0e05b2423bd504cb231ab5bb784f9 100644 (file)
--- a/include/configs/s5pc210_universal.h
+++ b/include/configs/s5pc210_universal.h
@@ -10,12 +10,7 @@
 #ifndef __CONFIG_UNIVERSAL_H
 #define __CONFIG_UNIVERSAL_H
 
-#include <configs/exynos4-dt.h>
-
-#define CONFIG_SYS_PROMPT      "Universal # "  /* Monitor Command Prompt */
-
-#undef CONFIG_DEFAULT_DEVICE_TREE
-#define CONFIG_DEFAULT_DEVICE_TREE     exynos4210-universal_c210
+#include <configs/exynos4-common.h>
 
 #define CONFIG_TIZEN                   /* TIZEN lib */
 
@@ -29,9 +24,6 @@
 
 #define SDRAM_BANK_SIZE                        (256 << 20)     /* 256 MB */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (80 * SZ_1M))
-
 /* select serial console configuration */
 #define CONFIG_SERIAL2
 #define CONFIG_BAUDRATE                        115200
@@ -111,12 +103,9 @@
                "onenand write 0x41008000 0xc00000 0x500000\0" \
        "bootk=" \
                "run loaduimage; bootm 0x40007FC0\0" \
-       "updatemmc=" \
-               "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
-               "mmc boot 0 1 1 0\0" \
        "updatebackup=" \
-               "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
-               "mmc boot 0 1 1 0\0" \
+               "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
+               "mmc dev 0 0\0" \
        "updatebootb=" \
                "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
        "lpj=lpj=3981312\0" \
@@ -170,8 +159,8 @@
 /*
  * I2C Settings
  */
-#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(1, b, 7)
-#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(1, b, 6)
+#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
+#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6
 
 #define CONFIG_CMD_I2C
 
@@ -189,23 +178,14 @@
 
 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
+#define CONFIG_USB_GADGET_S3C_UDC_OTG_PHY
 #define CONFIG_USB_GADGET_DUALSPEED
 
 /*
  * SPI Settings
  */
 #define CONFIG_SOFT_SPI
-#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
-#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_get(2, y3, 1)
-#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_get(2, y3, 3)
-#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_get(2, y3, 0)
-#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_get(2, y4, 3)
-
-#define SPI_DELAY udelay(1)
-#undef SPI_INIT
-#define SPI_SCL(bit) universal_spi_scl(bit)
-#define SPI_SDA(bit) universal_spi_sda(bit)
-#define SPI_READ universal_spi_read()
+
 #ifndef        __ASSEMBLY__
 void universal_spi_scl(int bit);
 void universal_spi_sda(int bit);
@@ -231,8 +211,8 @@ int universal_spi_read(void);
 #define KEY_PWR_INTERRUPT_REG          MAX8998_REG_IRQ1
 #define KEY_PWR_INTERRUPT_MASK         (1 << 7)
 
-#define KEY_VOL_UP_GPIO                        exynos4_gpio_get(2, x2, 0)
-#define KEY_VOL_DOWN_GPIO              exynos4_gpio_get(2, x2, 1)
+#define KEY_VOL_UP_GPIO                        EXYNOS4_GPIO_X20
+#define KEY_VOL_DOWN_GPIO              EXYNOS4_GPIO_X21
 #endif /* __ASSEMBLY__ */
 
 /* LCD console */
@@ -250,7 +230,4 @@ int universal_spi_read(void);
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 
-#define LCD_XRES       480
-#define LCD_YRES       800
-
 #endif /* __CONFIG_H */