ppc: Clean up calling of misc_init_r() during init

[karo-tx-uboot.git] / include / configs / sc3.h

diff --git a/include/configs/sc3.h b/include/configs/sc3.h
index 515b09789e73ca297113a6a9dc8ef4bafbefd336..57637607af8d8ce617b64627875709d684695731 100644 (file)
--- a/include/configs/sc3.h
+++ b/include/configs/sc3.h
@@ -63,6 +63,7 @@
 #define CONFIG_405GP   1
 
 #define CONFIG_BOARD_EARLY_INIT_F      1
+#define CONFIG_MISC_INIT_R             1       /* Call misc_init_r() */
 
 /*
  * Define IDE_USES_ISA_EMULATION for slower IDE access in the ISA-IO address range
@@ -122,7 +123,7 @@
        "rootpath=/opt/eldk/ppc_4xx\0"                                  \
        "bootfile=/tftpboot/sc3/uImage\0"                               \
        "u-boot=/tftpboot/sc3/u-boot.bin\0"                             \
-       "setup=tftp 200000 /tftpboot/sc3/setup.img;autoscr 200000\0"    \
+       "setup=tftp 200000 /tftpboot/sc3/setup.img;source 200000\0"     \
        "kernel_addr=FFE08000\0"                                        \
        ""
 #undef CONFIG_BOOTCOMMAND
@@ -186,20 +187,20 @@
 #include <config_cmd_default.h>
 
 
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_PCI
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IDE
+#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SOURCE
 
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
@@ -426,11 +427,12 @@ extern unsigned long offsetOfEnvironment;
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x77D00000
 
+#define CONFIG_SYS_64BIT_VSPRINTF      /* needed for nand_util.c */
 
 #define CONFIG_JFFS2_NAND 1                    /* jffs2 on nand support */
 
 /* No command line, one static partition */
-#undef CONFIG_JFFS2_CMDLINE
+#undef CONFIG_CMD_MTDPARTS
 #define CONFIG_JFFS2_DEV               "nand0"
 #define CONFIG_JFFS2_PART_SIZE         0x01000000
 #define CONFIG_JFFS2_PART_OFFSET       0x00000000