ARM: highbank: remove DRAM bank setup

[karo-tx-uboot.git] / include / configs / spear-common.h

diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h
index 36c2a8b1654c908e5a23c7e0d2616d8c2b58974d..f75c306b574ab02affa82e332383a60acfd61482 100644 (file)
--- a/include/configs/spear-common.h
+++ b/include/configs/spear-common.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2009
  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _SPEAR_COMMON_H
@@ -27,17 +11,16 @@
  * Common configurations used for both spear3xx as well as spear6xx
  */
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* U-boot Load Address */
 #define CONFIG_SYS_TEXT_BASE                   0x00700000
 
 /* Ethernet driver configuration */
 #define CONFIG_MII
-#define CONFIG_DESIGNWARE_ETH
-#define CONFIG_DW_SEARCH_PHY
-#define CONFIG_DW0_PHY                         1
-#define CONFIG_NET_MULTI
+#define CONFIG_PHYLIB
 #define CONFIG_PHY_RESET_DELAY                 10000           /* in usec */
-#define CONFIG_DW_AUTONEG
+#define CONFIG_PHY_GIGE                        /* Include GbE speed/duplex detection */
 
 /* USBD driver configuration */
 #if defined(CONFIG_SPEAR_USBTTY)
@@ -54,15 +37,23 @@
 #define CONFIG_EXTRA_ENV_USBTTY                        "usbtty=cdc_acm\0"
 
 /* I2C driver configuration */
-#define CONFIG_HARD_I2C
-#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DW
+#if defined(CONFIG_SPEAR600)
+#define CONFIG_SYS_I2C_BASE                    0xD0200000
+#elif defined(CONFIG_SPEAR300)
+#define CONFIG_SYS_I2C_BASE                    0xD0180000
+#elif defined(CONFIG_SPEAR310)
+#define CONFIG_SYS_I2C_BASE                    0xD0180000
+#elif defined(CONFIG_SPEAR320)
+#define CONFIG_SYS_I2C_BASE                    0xD0180000
+#endif
 #define CONFIG_SYS_I2C_SPEED                   400000
 #define CONFIG_SYS_I2C_SLAVE                   0x02
 
 #define CONFIG_I2C_CHIPADDRESS                 0x50
 
 /* Timer, HZ specific defines */
-#define CONFIG_SYS_HZ                          1000
 
 /* Flash configuration */
 #if defined(CONFIG_FLASH_PNOR)
@@ -114,17 +105,11 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_ENV
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_RUN
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
 /*
  * Default Environment Varible definitions
  */
@@ -210,10 +195,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_MISC_INIT_R
 #define CONFIG_ZERO_BOOTDELAY_CHECK
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_STOP_STR               " "
-#define CONFIG_AUTOBOOT_PROMPT                 \
-               "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
 
 #define CONFIG_SYS_MEMTEST_START               0x00800000
 #define CONFIG_SYS_MEMTEST_END                 0x04000000
@@ -232,14 +213,6 @@
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
-/* Stack sizes */
-#define CONFIG_STACKSIZE                       (128*1024)
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ                   (4*1024)
-#define CONFIG_STACKSIZE_FIQ                   (4*1024)
-#endif
-
 /* Physical Memory Map */
 #define CONFIG_NR_DRAM_BANKS                   1
 #define PHYS_SDRAM_1                           0x00000000