/*
- * Copyright (C) 2012-2015 Panasonic Corporation
- * Copyright (C) 2015 Socionext Inc.
- * Author: Masahiro Yamada <yamada.masahiro@socionext.com>
+ * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#if defined(CONFIG_MACH_PH1_PRO4)
+#if defined(CONFIG_MACH_PH1_SLD3)
#define CONFIG_DDR_NUM_CH0 2
-#define CONFIG_DDR_NUM_CH1 2
+#define CONFIG_DDR_NUM_CH1 1
+#define CONFIG_DDR_NUM_CH2 1
/* Physical start address of SDRAM */
#define CONFIG_SDRAM0_BASE 0x80000000
#define CONFIG_SDRAM0_SIZE 0x20000000
-#define CONFIG_SDRAM1_BASE 0xa0000000
+#define CONFIG_SDRAM1_BASE 0xc0000000
#define CONFIG_SDRAM1_SIZE 0x20000000
+#define CONFIG_SDRAM2_BASE 0xc0000000
+#define CONFIG_SDRAM2_SIZE 0x10000000
#endif
#if defined(CONFIG_MACH_PH1_LD4)
#define CONFIG_SDRAM1_SIZE 0x10000000
#endif
+#if defined(CONFIG_MACH_PH1_PRO4)
+#define CONFIG_DDR_NUM_CH0 2
+#define CONFIG_DDR_NUM_CH1 2
+
+/* Physical start address of SDRAM */
+#define CONFIG_SDRAM0_BASE 0x80000000
+#define CONFIG_SDRAM0_SIZE 0x20000000
+#define CONFIG_SDRAM1_BASE 0xa0000000
+#define CONFIG_SDRAM1_SIZE 0x20000000
+#endif
+
#if defined(CONFIG_MACH_PH1_SLD8)
#define CONFIG_DDR_NUM_CH0 1
#define CONFIG_DDR_NUM_CH1 1
#define CONFIG_NAND_DENALI_ECC_SIZE 1024
+#ifdef CONFIG_MACH_PH1_SLD3
+#define CONFIG_SYS_NAND_REGS_BASE 0xf8100000
+#define CONFIG_SYS_NAND_DATA_BASE 0xf8000000
+#else
#define CONFIG_SYS_NAND_REGS_BASE 0x68100000
#define CONFIG_SYS_NAND_DATA_BASE 0x68000000
+#endif
#define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10)
#define CONFIG_BOOTDELAY 3
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED 1
-#define CONFIG_AUTOBOOT_PROMPT \
- "Press SPACE to abort autoboot in %d seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "d"
-#define CONFIG_AUTOBOOT_STOP_STR " "
/*
* Network Configuration
*/
-#define CONFIG_ETHADDR 00:21:83:24:00:00
#define CONFIG_SERVERIP 192.168.11.1
#define CONFIG_IPADDR 192.168.11.10
#define CONFIG_GATEWAYIP 192.168.11.1
#define CONFIG_LOADADDR 0x84000000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-#define CONFIG_BOOTFILE "fit.itb"
#define CONFIG_CMDLINE_EDITING /* add command line history */
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
"tftpboot; bootm;"
-#define CONFIG_BOOTARGS " user_debug=0x1f init=/sbin/init"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "image_offset=0x00080000\0" \
- "image_size=0x00f00000\0" \
- "verify=n\0" \
- "nandupdate=nand erase 0 0x100000 &&" \
- "tftpboot u-boot-spl.bin &&" \
- "nand write $loadaddr 0 0x10000 &&" \
- "tftpboot u-boot-dtb.img &&" \
- "nand write $loadaddr 0x10000 0xf0000\0" \
- "norboot=run add_default_bootargs &&" \
- "bootm $image_offset\0" \
- "nandboot=run add_default_bootargs &&" \
- "nand read $loadaddr $image_offset $image_size &&" \
- "bootm\0" \
- "add_default_bootargs=setenv bootargs $bootargs" \
- " console=ttyS0,$baudrate\0" \
+#define CONFIG_BOOTARGS " earlyprintk loglevel=8"
+
+#ifdef CONFIG_FIT
+#define CONFIG_BOOTFILE "fitImage"
+#define LINUXBOOT_ENV_SETTINGS \
+ "fit_addr=0x00100000\0" \
+ "fit_addr_r=0x84100000\0" \
+ "fit_size=0x00f00000\0" \
+ "norboot=run add_default_bootargs &&" \
+ "bootm $fit_addr\0" \
+ "nandboot=run add_default_bootargs &&" \
+ "nand read $fit_addr_r $fit_addr $fit_size &&" \
+ "bootm $fit_addr_r\0" \
+ "tftpboot=run add_default_bootargs &&" \
+ "tftpboot $fit_addr_r $bootfile &&" \
+ "bootm $fit_addr_r\0"
+#else
+#define CONFIG_BOOTFILE "uImage"
+#define LINUXBOOT_ENV_SETTINGS \
+ "fdt_addr=0x00100000\0" \
+ "fdt_addr_r=0x84100000\0" \
+ "fdt_size=0x00008000\0" \
+ "fdt_file=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+ "kernel_addr=0x00200000\0" \
+ "kernel_addr_r=0x84200000\0" \
+ "kernel_size=0x00800000\0" \
+ "ramdisk_addr=0x00a00000\0" \
+ "ramdisk_addr_r=0x84a00000\0" \
+ "ramdisk_size=0x00600000\0" \
+ "ramdisk_file=rootfs.cpio.uboot\0" \
+ "norboot=run add_default_bootargs &&" \
+ "bootm $kernel_addr $ramdisk_addr $fdt_addr\0" \
+ "nandboot=run add_default_bootargs &&" \
+ "nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
+ "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
+ "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
+ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
+ "tftpboot=run add_default_bootargs &&" \
+ "tftpboot $kernel_addr_r $bootfile &&" \
+ "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
+ "tftpboot $fdt_addr_r $fdt_file &&" \
+ "bootm $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0"
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "verify=n\0" \
+ "nandupdate=nand erase 0 0x00100000 &&" \
+ "tftpboot u-boot-spl-dtb.bin &&" \
+ "nand write $loadaddr 0 0x00010000 &&" \
+ "tftpboot u-boot-dtb.img &&" \
+ "nand write $loadaddr 0x00010000 0x000f0000\0" \
+ "add_default_bootargs=setenv bootargs $bootargs" \
+ " console=ttyS0,$baudrate\0" \
+ LINUXBOOT_ENV_SETTINGS
/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT
-#define CONFIG_HAVE_ARM_SECURE
-
/* Memory Size & Mapping */
#define CONFIG_SYS_SDRAM_BASE CONFIG_SDRAM0_BASE
#define CONFIG_SYS_SDRAM_SIZE (CONFIG_SDRAM0_SIZE)
#endif
-#define CONFIG_SYS_TEXT_BASE 0x84000000
-
-#if defined(CONFIG_MACH_PH1_LD4) || defined(CONFIG_MACH_PH1_SLD8)
+#if defined(CONFIG_MACH_PH1_SLD3) || defined(CONFIG_MACH_PH1_LD4) || \
+ defined(CONFIG_MACH_PH1_SLD8)
#define CONFIG_SPL_TEXT_BASE 0x00040000
#endif
#if defined(CONFIG_MACH_PH1_PRO4)
#define CONFIG_SPL_TEXT_BASE 0x00100000
#endif
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
#define CONFIG_SPL_STACK (0x0ff08000)
-#define CONFIG_SYS_INIT_SP_ADDR ((CONFIG_SYS_TEXT_BASE) - 0x00001000)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE)
#define CONFIG_PANIC_HANG
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000
+#define CONFIG_SPL_MAX_FOOTPRINT 0x10000
+
#endif /* __CONFIG_UNIPHIER_COMMON_H__ */
projects / karo-tx-uboot.git / blobdiff