tpm: Convert board config TPM options to Kconfig

[karo-tx-uboot.git] / include / configs / x86-common.h

diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 928ed5845426bf00d168780bd5daa01bd8b194b9..3f153f24aeaa1bbd4a1b882cbd6cbd595854d0f3 100644 (file)
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -16,11 +16,12 @@
  * (easy to change)
  */
 #define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_SYS_VSNPRINTF
 #define CONFIG_ZBOOT_32
 #define CONFIG_PHYSMEM
 #define CONFIG_DISPLAY_BOARDINFO_LATE
 #define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_LAST_STAGE_INIT
+#define CONFIG_NR_DRAM_BANKS           8
 
 #define CONFIG_LMB
 #define CONFIG_OF_LIBFDT
@@ -36,6 +37,7 @@
 #define CONFIG_SCSI_AHCI
 #ifdef CONFIG_SCSI_AHCI
 #define CONFIG_LIBATA
+#define CONFIG_LBA48
 #define CONFIG_SYS_64BIT_LBA
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID    2
@@ -45,8 +47,6 @@
 #endif
 
 /* Generic TPM interfaced through LPC bus */
-#define CONFIG_TPM
-#define CONFIG_TPM_TIS_LPC
 #define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000
 
 /*-----------------------------------------------------------------------
@@ -75,10 +75,6 @@
 #define CONFIG_SYS_HUSH_PARSER
 
 #define CONFIG_SUPPORT_VFAT
-/************************************************************
- * ATAPI support (experimental)
- ************************************************************/
-#define CONFIG_ATAPI
 
 /************************************************************
  * DISK Partition support
@@ -89,7 +85,9 @@
 #define CONFIG_ISO_PARTITION           /* Experimental */
 
 #define CONFIG_CMD_PART
+#ifdef CONFIG_SYS_COREBOOT
 #define CONFIG_CMD_CBFS
+#endif
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_PARTITION_UUIDS
@@ -102,37 +100,15 @@
 /*-----------------------------------------------------------------------
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_CONSOLE
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_ECHO
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_FPGA
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_GPIO
-#define CONFIG_CMD_IMI
-#undef CONFIG_CMD_IMLS
 #define CONFIG_CMD_IO
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_ITEST
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_SETGETDCR
-#define CONFIG_CMD_SOURCE
 #define CONFIG_CMD_TIME
 #define CONFIG_CMD_GETTIME
-#define CONFIG_CMD_XIMG
 #define CONFIG_CMD_SCSI
 
 #define CONFIG_CMD_FAT
@@ -195,7 +171,6 @@
  * FLASH configuration
  */
 #define CONFIG_ICH_SPI
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_MACRONIX
 #define CONFIG_SPI_FLASH_WINBOND
 #define CONFIG_SPI_FLASH_GIGADEVICE
@@ -208,13 +183,14 @@
 /*-----------------------------------------------------------------------
  * Environment configuration
  */
-#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SIZE                        0x01000
 
 /*-----------------------------------------------------------------------
  * PCI configuration
  */
 #define CONFIG_PCI
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /*-----------------------------------------------------------------------
  * USB configuration
@@ -237,9 +213,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_BOOTSTAGE
-#define CONFIG_CMD_BOOTSTAGE
-
 #define CONFIG_CMD_USB
 
 /* Default environment */
@@ -250,6 +223,7 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS                      \
        CONFIG_STD_DEVICES_SETTINGS                     \
+       "pciconfighost=1\0"                             \
        "netdev=eth0\0"                                 \
        "consoledev=ttyS0\0"                            \
        "othbootargs=acpi=off\0"                        \