arm: mx5: clock: add support for changing CPU clock via cmdline

[karo-tx-uboot.git] / include / configs / zeus.h

diff --git a/include/configs/zeus.h b/include/configs/zeus.h
index f9a6b9313f66eb72247de6b1bd282695b8c8d36f..386f9deb701f8dc50922c57e7ca15ec31b7ecbf9 100644 (file)
--- a/include/configs/zeus.h
+++ b/include/configs/zeus.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2007
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+ 
  */
 
 /************************************************************************
@@ -53,7 +37,6 @@
 #define CONFIG_PHY_ADDR                0x01    /* PHY address                  */
 #define CONFIG_HAS_ETH1                1
 #define CONFIG_PHY1_ADDR       0x11    /* EMAC1 PHY address            */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_PHY_RESET       1
 #define CONFIG_PHY_RESET_DELAY 300     /* PHY RESET recovery delay     */
@@ -79,7 +62,6 @@
 #define CONFIG_CMD_ELF
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOG
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_NFS
@@ -132,7 +114,6 @@
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK                     /* external serial clock */
 #define CONFIG_SYS_BASE_BAUD   691200
 #define CONFIG_BAUDRATE                115200
-#define CONFIG_SERIAL_MULTI
 
 #define CONFIG_SYS_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
@@ -171,11 +152,11 @@
 /*-----------------------------------------------------------------------
  * I2C
  *----------------------------------------------------------------------*/
-#define CONFIG_HARD_I2C                1               /* I2C with hardware support    */
-#undef CONFIG_SOFT_I2C                         /* I2C bit-banged               */
-#define CONFIG_PPC4XX_I2C              /* use PPC4xx driver            */
-#define CONFIG_SYS_I2C_SPEED           400000          /* I2C speed and slave address  */
-#define CONFIG_SYS_I2C_SLAVE           0x7F
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0          400000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0          0x7F
 
 /* these are for the ST M24C02 2kbit serial i2c eeprom */
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50            /* base address */