/*
+ * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ *
* MPC823 and PXA LCD Controller
*
* Modeled after video interface by Paolo Scaffardi
extern short console_col;
extern short console_row;
+extern struct vidinfo panel_info;
+
+extern void lcd_ctrl_init (void *lcdbase);
+extern void lcd_enable (void);
+
+/* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
+extern void lcd_setcolreg (ushort regno,
+ ushort red, ushort green, ushort blue);
+extern void lcd_initcolregs (void);
+
+/* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
+extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
#if defined CONFIG_MPC823
/*
u_char vl_wbf; /* Wait between frames */
} vidinfo_t;
-extern vidinfo_t panel_info;
-
#elif defined CONFIG_PXA250
/*
* PXA LCD DMA descriptor
struct pxafb_info pxa;
} vidinfo_t;
-extern vidinfo_t panel_info;
+#elif defined(CONFIG_ATMEL_LCD)
+
+typedef struct vidinfo {
+ u_long vl_col; /* Number of columns (i.e. 640) */
+ u_long vl_row; /* Number of rows (i.e. 480) */
+ u_long vl_clk; /* pixel clock in ps */
+
+ /* LCD configuration register */
+ u_long vl_sync; /* Horizontal / vertical sync */
+ u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+ u_long vl_tft; /* 0 = passive, 1 = TFT */
+
+ /* Horizontal control register. */
+ u_long vl_hsync_len; /* Length of horizontal sync */
+ u_long vl_left_margin; /* Time from sync to picture */
+ u_long vl_right_margin; /* Time from picture to sync */
+
+ /* Vertical control register. */
+ u_long vl_vsync_len; /* Length of vertical sync */
+ u_long vl_upper_margin; /* Time from sync to picture */
+ u_long vl_lower_margin; /* Time from picture to sync */
+
+ u_long mmio; /* Memory mapped registers */
+} vidinfo_t;
+
+#elif defined(CONFIG_MXC2_LCD)
+
+typedef struct vidinfo {
+ u_long vl_refresh; /* Refresh Rate Hz */
+ u_long vl_row; /* resolution in x */
+ u_long vl_col; /* resolution in y */
+ u_long vl_pixclock; /* pixel clock in picoseconds */
+ u_long vl_left_margin; /* Horizontal back porch */
+ u_long vl_right_margin; /* Horizontal front porch */
+ u_long vl_upper_margin; /* Vertical back porch */
+ u_long vl_lower_margin; /* Vertical front porch */
+ u_long vl_hsync; /* Horizontal sync pulse length */
+ u_long vl_vsync; /* Vertical sync pulse length */
+ u_long vl_sync; /* Polarity on data enable */
+ u_long vl_mode; /* Video Mode */
+ u_long vl_flag;
+ u_char vl_bpix;
+ ushort *cmap;
+} vidinfo_t;
+
+#elif defined(CONFIG_MXC_EPDC)
+
+struct waveform_modes {
+ int mode_init;
+ int mode_du;
+ int mode_gc4;
+ int mode_gc8;
+ int mode_gc16;
+ int mode_gc32;
+};
+
+struct epdc_data_struct {
+ /* EPDC buffer pointers */
+ u_long working_buf_addr;
+ u_long waveform_buf_addr;
+
+ /* Waveform mode definitions */
+ struct waveform_modes wv_modes;
+};
+
+typedef struct vidinfo {
+ u_long vl_refresh; /* Refresh Rate Hz */
+ u_long vl_row; /* resolution in x */
+ u_long vl_col; /* resolution in y */
+ u_long vl_pixclock; /* pixel clock in picoseconds */
+ u_long vl_left_margin; /* Horizontal back porch */
+ u_long vl_right_margin; /* Horizontal front porch */
+ u_long vl_upper_margin; /* Vertical back porch */
+ u_long vl_lower_margin; /* Vertical front porch */
+ u_long vl_hsync; /* Horizontal sync pulse length */
+ u_long vl_vsync; /* Vertical sync pulse length */
+ u_long vl_sync; /* Polarity on data enable */
+ u_long vl_mode; /* Video Mode */
+ u_long vl_flag;
+ u_char vl_bpix;
+ ushort *cmap;
+ struct epdc_data_struct epdc_data;
+} vidinfo_t;
+
+#else
-#elif defined(CONFIG_MCC200)
typedef struct vidinfo {
ushort vl_col; /* Number of columns (i.e. 160) */
ushort vl_row; /* Number of rows (i.e. 100) */
u_char vl_bpix; /* Bits per pixel, 0 = 1 */
+
+ ushort *cmap; /* Pointer to the colormap */
+
+ void *priv; /* Pointer to driver-specific data */
} vidinfo_t;
-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 */
+
+#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
+
+extern vidinfo_t panel_info;
/* Video functions */
void lcd_puts (const char *s);
void lcd_printf (const char *fmt, ...);
+/* Allow boards to customize the information displayed */
+void lcd_show_board_info(void);
/************************************************************************/
/* ** BITMAP DISPLAY SUPPORT */
/************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
# include <bmp_layout.h>
# include <asm/byteorder.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
/*
* Information about displays we are using. This is for configuring
* the LCD controller and memory allocation. Someone has to know what
* is connected, as we can't autodetect anything.
*/
-#define CFG_HIGH 0 /* Pins are active high */
-#define CFG_LOW 1 /* Pins are active low */
+#define CONFIG_SYS_HIGH 0 /* Pins are active high */
+#define CONFIG_SYS_LOW 1 /* Pins are active low */
#define LCD_MONOCHROME 0
#define LCD_COLOR2 1
#if LCD_BPP == LCD_MONOCHROME
# define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
(c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
-#elif LCD_BPP == LCD_COLOR8
+#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
# define COLOR_MASK(c) (c)
#else
# error Unsupported LCD BPP.
projects / karo-tx-uboot.git / blobdiff