*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#define _MMC_H_
#include <linux/list.h>
+#include <linux/compiler.h>
#define SD_VERSION_SD 0x20000
-#define SD_VERSION_2 (SD_VERSION_SD | 0x20)
-#define SD_VERSION_1_0 (SD_VERSION_SD | 0x10)
-#define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a)
+#define SD_VERSION_3 (SD_VERSION_SD | 0x300)
+#define SD_VERSION_2 (SD_VERSION_SD | 0x200)
+#define SD_VERSION_1_0 (SD_VERSION_SD | 0x100)
+#define SD_VERSION_1_10 (SD_VERSION_SD | 0x10a)
#define MMC_VERSION_MMC 0x10000
#define MMC_VERSION_UNKNOWN (MMC_VERSION_MMC)
-#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x12)
-#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x14)
-#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x22)
-#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x30)
-#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x40)
+#define MMC_VERSION_1_2 (MMC_VERSION_MMC | 0x102)
+#define MMC_VERSION_1_4 (MMC_VERSION_MMC | 0x104)
+#define MMC_VERSION_2_2 (MMC_VERSION_MMC | 0x202)
+#define MMC_VERSION_3 (MMC_VERSION_MMC | 0x300)
+#define MMC_VERSION_4 (MMC_VERSION_MMC | 0x400)
+#define MMC_VERSION_4_1 (MMC_VERSION_MMC | 0x401)
+#define MMC_VERSION_4_2 (MMC_VERSION_MMC | 0x402)
+#define MMC_VERSION_4_3 (MMC_VERSION_MMC | 0x403)
+#define MMC_VERSION_4_41 (MMC_VERSION_MMC | 0x429)
+#define MMC_VERSION_4_5 (MMC_VERSION_MMC | 0x405)
#define MMC_MODE_HS 0x001
#define MMC_MODE_HS_52MHz 0x010
#define MMC_MODE_4BIT 0x100
#define MMC_MODE_8BIT 0x200
#define MMC_MODE_SPI 0x400
+#define MMC_MODE_HC 0x800
+
+#define MMC_MODE_MASK_WIDTH_BITS (MMC_MODE_4BIT | MMC_MODE_8BIT)
+#define MMC_MODE_WIDTH_BITS_SHIFT 8
#define SD_DATA_4BIT 0x00040000
#define UNUSABLE_ERR -17 /* Unusable Card */
#define COMM_ERR -18 /* Communications Error */
#define TIMEOUT -19
+#define IN_PROGRESS -20 /* operation is in progress */
#define MMC_CMD_GO_IDLE_STATE 0
#define MMC_CMD_SEND_OP_COND 1
#define MMC_CMD_READ_MULTIPLE_BLOCK 18
#define MMC_CMD_WRITE_SINGLE_BLOCK 24
#define MMC_CMD_WRITE_MULTIPLE_BLOCK 25
+#define MMC_CMD_ERASE_GROUP_START 35
+#define MMC_CMD_ERASE_GROUP_END 36
+#define MMC_CMD_ERASE 38
#define MMC_CMD_APP_CMD 55
#define MMC_CMD_SPI_READ_OCR 58
#define MMC_CMD_SPI_CRC_ON_OFF 59
+#define MMC_CMD_RES_MAN 62
+
+#define MMC_CMD62_ARG1 0xefac62ec
+#define MMC_CMD62_ARG2 0xcbaea7
+
#define SD_CMD_SEND_RELATIVE_ADDR 3
#define SD_CMD_SWITCH_FUNC 6
#define SD_CMD_SEND_IF_COND 8
#define SD_CMD_APP_SET_BUS_WIDTH 6
+#define SD_CMD_ERASE_WR_BLK_START 32
+#define SD_CMD_ERASE_WR_BLK_END 33
#define SD_CMD_APP_SEND_OP_COND 41
#define SD_CMD_APP_SEND_SCR 51
#define MMC_HS_TIMING 0x00000100
#define MMC_HS_52MHZ 0x2
-#define OCR_BUSY 0x80000000
-#define OCR_HCS 0x40000000
+#define OCR_BUSY 0x80000000
+#define OCR_HCS 0x40000000
#define OCR_VOLTAGE_MASK 0x007FFF80
#define OCR_ACCESS_MODE 0x60000000
+#define SECURE_ERASE 0x80000000
+
#define MMC_STATUS_MASK (~0x0206BF7F)
-#define MMC_STATUS_RDY_FOR_DATA (1<<8)
-#define MMC_STATUS_CURR_STATE (0xf<<9)
+#define MMC_STATUS_RDY_FOR_DATA (1 << 8)
+#define MMC_STATUS_CURR_STATE (0xf << 9)
+#define MMC_STATUS_ERROR (1 << 19)
+
+#define MMC_STATE_PRG (7 << 9)
#define MMC_VDD_165_195 0x00000080 /* VDD voltage 1.65 - 1.95 */
#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
/*
* EXT_CSD fields
*/
-
-#define EXT_CSD_BUS_WIDTH 183 /* R/W */
-#define EXT_CSD_HS_TIMING 185 /* R/W */
-#define EXT_CSD_CARD_TYPE 196 /* RO */
-#define EXT_CSD_REV 192 /* RO */
-#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */
+#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
+#define EXT_CSD_BOOT_BUS_WIDTH 177
+#define EXT_CSD_PART_CONF 179 /* R/W */
+#define EXT_CSD_BUS_WIDTH 183 /* R/W */
+#define EXT_CSD_HS_TIMING 185 /* R/W */
+#define EXT_CSD_REV 192 /* RO */
+#define EXT_CSD_CARD_TYPE 196 /* RO */
+#define EXT_CSD_SEC_CNT 212 /* RO, 4 bytes */
+#define EXT_CSD_HC_ERASE_GRP_SIZE 224 /* RO */
+#define EXT_CSD_BOOT_MULT 226 /* RO */
/*
* EXT_CSD field definitions
*/
-#define EXT_CSD_CMD_SET_NORMAL (1<<0)
-#define EXT_CSD_CMD_SET_SECURE (1<<1)
-#define EXT_CSD_CMD_SET_CPSECURE (1<<2)
+#define EXT_CSD_CMD_SET_NORMAL (1 << 0)
+#define EXT_CSD_CMD_SET_SECURE (1 << 1)
+#define EXT_CSD_CMD_SET_CPSECURE (1 << 2)
-#define EXT_CSD_CARD_TYPE_26 (1<<0) /* Card can run at 26MHz */
-#define EXT_CSD_CARD_TYPE_52 (1<<1) /* Card can run at 52MHz */
+#define EXT_CSD_CARD_TYPE_26 (1 << 0) /* Card can run at 26MHz */
+#define EXT_CSD_CARD_TYPE_52 (1 << 1) /* Card can run at 52MHz */
#define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */
#define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */
#define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */
+#define EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
+#define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
+#define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
+#define EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
+
+#define EXT_CSD_BOOT_ACK(x) (x << 6)
+#define EXT_CSD_BOOT_PART_NUM(x) (x << 3)
+#define EXT_CSD_PARTITION_ACCESS(x) (x << 0)
+
+
#define R1_ILLEGAL_COMMAND (1 << 22)
#define R1_APP_CMD (1 << 5)
#define MMC_RSP_PRESENT (1 << 0)
-#define MMC_RSP_136 (1 << 1) /* 136 bit response */
-#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
-#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
-#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
+#define MMC_RSP_136 (1 << 1) /* 136 bit response */
+#define MMC_RSP_CRC (1 << 2) /* expect valid crc */
+#define MMC_RSP_BUSY (1 << 3) /* card may send busy */
+#define MMC_RSP_OPCODE (1 << 4) /* response contains opcode */
-#define MMC_RSP_NONE (0)
-#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_NONE (0)
+#define MMC_RSP_R1 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define MMC_RSP_R1b (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
MMC_RSP_BUSY)
-#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
-#define MMC_RSP_R3 (MMC_RSP_PRESENT)
-#define MMC_RSP_R4 (MMC_RSP_PRESENT)
-#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
-
+#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
+#define MMC_RSP_R3 (MMC_RSP_PRESENT)
+#define MMC_RSP_R4 (MMC_RSP_PRESENT)
+#define MMC_RSP_R5 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+
+#define MMCPART_NOAVAILABLE (0xff)
+#define PART_ACCESS_MASK (0x7)
+#define PART_SUPPORT (0x1)
+
+/* Maximum block size for MMC */
+#define MMC_MAX_BLOCK_LEN 512
+
+/* The number of MMC physical partitions. These consist of:
+ * boot partitions (2), general purpose partitions (4) in MMC v4.4.
+ */
+#define MMC_NUM_BOOT_PARTITION 2
struct mmc_cid {
unsigned long psn;
char pnm[7];
};
-/*
- * WARNING!
- *
- * This structure is used by atmel_mci.c only.
- * It works for the AVR32 architecture but NOT
- * for ARM/AT91 architectures.
- * Its use is highly depreciated.
- * After the atmel_mci.c driver for AVR32 has
- * been replaced this structure will be removed.
- */
-struct mmc_csd
-{
- u8 csd_structure:2,
- spec_vers:4,
- rsvd1:2;
- u8 taac;
- u8 nsac;
- u8 tran_speed;
- u16 ccc:12,
- read_bl_len:4;
- u64 read_bl_partial:1,
- write_blk_misalign:1,
- read_blk_misalign:1,
- dsr_imp:1,
- rsvd2:2,
- c_size:12,
- vdd_r_curr_min:3,
- vdd_r_curr_max:3,
- vdd_w_curr_min:3,
- vdd_w_curr_max:3,
- c_size_mult:3,
- sector_size:5,
- erase_grp_size:5,
- wp_grp_size:5,
- wp_grp_enable:1,
- default_ecc:2,
- r2w_factor:3,
- write_bl_len:4,
- write_bl_partial:1,
- rsvd3:5;
- u8 file_format_grp:1,
- copy:1,
- perm_write_protect:1,
- tmp_write_protect:1,
- file_format:2,
- ecc:2;
- u8 crc:7;
- u8 one:1;
-};
-
struct mmc_cmd {
ushort cmdidx;
uint resp_type;
uint cmdarg;
uint response[4];
- uint flags;
};
struct mmc_data {
void *priv;
uint voltages;
uint version;
+ uint has_init;
uint f_min;
uint f_max;
int high_capacity;
uint csd[4];
uint cid[4];
ushort rca;
+ char part_config;
+ char part_num;
uint tran_speed;
uint read_bl_len;
uint write_bl_len;
+ uint erase_grp_size;
u64 capacity;
block_dev_desc_t block_dev;
int (*send_cmd)(struct mmc *mmc,
struct mmc_cmd *cmd, struct mmc_data *data);
void (*set_ios)(struct mmc *mmc);
int (*init)(struct mmc *mmc);
-#ifdef CONFIG_MMC_MBLOCK
+ int (*getcd)(struct mmc *mmc);
+ int (*getwp)(struct mmc *mmc);
uint b_max;
-#endif
+ char op_cond_pending; /* 1 if we are waiting on an op_cond command */
+ char init_in_progress; /* 1 if we have done mmc_start_init() */
+ char preinit; /* start init as early as possible */
+ uint op_cond_response; /* the response byte from the last op_cond */
};
int mmc_register(struct mmc *mmc);
struct mmc *find_mmc_device(int dev_num);
int mmc_set_dev(int dev_num);
void print_mmc_devices(char separator);
-int board_mmc_getcd(u8 *cd, struct mmc *mmc);
+int get_mmc_num(void);
+int board_mmc_getcd(struct mmc *mmc);
+int mmc_switch_part(int dev_num, unsigned int part_num);
+int mmc_getcd(struct mmc *mmc);
+int mmc_getwp(struct mmc *mmc);
+void spl_mmc_load(void) __noreturn;
+/* Function to change the size of boot partition and rpmb partitions */
+int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize,
+ unsigned long rpmbsize);
+/* Function to send commands to open/close the specified boot partition */
+int mmc_boot_part_access(struct mmc *mmc, u8 ack, u8 part_num, u8 access);
+
+/**
+ * Start device initialization and return immediately; it does not block on
+ * polling OCR (operation condition register) status. Then you should call
+ * mmc_init, which would block on polling OCR status and complete the device
+ * initializatin.
+ *
+ * @param mmc Pointer to a MMC device struct
+ * @return 0 on success, IN_PROGRESS on waiting for OCR status, <0 on error.
+ */
+int mmc_start_init(struct mmc *mmc);
+
+/**
+ * Set preinit flag of mmc device.
+ *
+ * This will cause the device to be pre-inited during mmc_initialize(),
+ * which may save boot time if the device is not accessed until later.
+ * Some eMMC devices take 200-300ms to init, but unfortunately they
+ * must be sent a series of commands to even get them to start preparing
+ * for operation.
+ *
+ * @param mmc Pointer to a MMC device struct
+ * @param preinit preinit flag value
+ */
+void mmc_set_preinit(struct mmc *mmc, int preinit);
#ifdef CONFIG_GENERIC_MMC
-int atmel_mci_init(void *regs);
#define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
#else
projects / karo-tx-uboot.git / blobdiff