* Specification for definitions of TPM commands.
*/
+#define TPM_HEADER_SIZE 10
+
+enum tpm_duration {
+ TPM_SHORT = 0,
+ TPM_MEDIUM = 1,
+ TPM_LONG = 2,
+ TPM_UNDEFINED,
+
+ TPM_DURATION_COUNT,
+};
+
enum tpm_startup_type {
TPM_ST_CLEAR = 0x0001,
TPM_ST_STATE = 0x0002,
TPM_DEFEND_LOCK_RUNNING = TPM_BASE + TPM_NON_FATAL + 3,
};
+#ifdef CONFIG_DM_TPM
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE 1260
+
+/**
+ * struct tpm_chip_priv - Information about a TPM, stored by the uclass
+ *
+ * These values must be set up by the device's probe() method before
+ * communcation is attempted. If the device has an xfer() method, this is
+ * not needed. There is no need to set up @buf.
+ *
+ * @duration_ms: Length of each duration type in milliseconds
+ * @retry_time_ms: Time to wait before retrying receive
+ */
+struct tpm_chip_priv {
+ uint duration_ms[TPM_DURATION_COUNT];
+ uint retry_time_ms;
+ u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
+};
+
+/**
+ * struct tpm_ops - low-level TPM operations
+ *
+ * These are designed to avoid loops and delays in the driver itself. These
+ * should be handled in the uclass.
+ *
+ * In gneral you should implement everything except xfer(). Where you need
+ * complete control of the transfer, then xfer() can be provided and will
+ * override the other methods.
+ *
+ * This interface is for low-level TPM access. It does not understand the
+ * concept of localities or the various TPM messages. That interface is
+ * defined in the functions later on in this file, but they all translate
+ * to bytes which are sent and received.
+ */
+struct tpm_ops {
+ /**
+ * open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller should call
+ * close().
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*open)(struct udevice *dev);
+
+ /**
+ * close() - Close the current session
+ *
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
+ *
+ * @dev: Device to close
+ * @return 0 ok OK, -ve on error
+ */
+ int (*close)(struct udevice *dev);
+
+ /**
+ * get_desc() - Get a text description of the TPM
+ *
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+ int (*get_desc)(struct udevice *dev, char *buf, int size);
+
+ /**
+ * send() - send data to the TPM
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ *
+ * Returns 0 on success or -ve on failure.
+ */
+ int (*send)(struct udevice *dev, const uint8_t *sendbuf,
+ size_t send_size);
+
+ /**
+ * recv() - receive a response from the TPM
+ *
+ * @dev: Device to talk to
+ * @recvbuf: Buffer to save the response to
+ * @max_size: Maximum number of bytes to receive
+ *
+ * Returns number of bytes received on success, -EAGAIN if the TPM
+ * response is not ready, -EINTR if cancelled, or other -ve value on
+ * failure.
+ */
+ int (*recv)(struct udevice *dev, uint8_t *recvbuf, size_t max_size);
+
+ /**
+ * cleanup() - clean up after an operation in progress
+ *
+ * This is called if receiving times out. The TPM may need to abort
+ * the current transaction if it did not complete, and make itself
+ * ready for another.
+ *
+ * @dev: Device to talk to
+ */
+ int (*cleanup)(struct udevice *dev);
+
+ /**
+ * xfer() - send data to the TPM and get response
+ *
+ * This method is optional. If it exists it is used in preference
+ * to send(), recv() and cleanup(). It should handle all aspects of
+ * TPM communication for a single transfer.
+ *
+ * @dev: Device to talk to
+ * @sendbuf: Buffer of the data to send
+ * @send_size: Size of the data to send
+ * @recvbuf: Buffer to save the response to
+ * @recv_size: Pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_size) or -ve on failure.
+ */
+ int (*xfer)(struct udevice *dev, const uint8_t *sendbuf,
+ size_t send_size, uint8_t *recvbuf, size_t *recv_size);
+};
+
+#define tpm_get_ops(dev) ((struct tpm_ops *)device_get_ops(dev))
+
+/**
+ * tpm_open() - Request access to locality 0 for the caller
+ *
+ * After all commands have been completed the caller is supposed to
+ * call tpm_close().
+ *
+ * Returns 0 on success, -ve on failure.
+ */
+int tpm_open(struct udevice *dev);
+
+/**
+ * tpm_close() - Close the current session
+ *
+ * Releasing the locked locality. Returns 0 on success, -ve 1 on
+ * failure (in case lock removal did not succeed).
+ */
+int tpm_close(struct udevice *dev);
+
+/**
+ * tpm_get_desc() - Get a text description of the TPM
+ *
+ * @dev: Device to check
+ * @buf: Buffer to put the string
+ * @size: Maximum size of buffer
+ * @return length of string, or -ENOSPC it no space
+ */
+int tpm_get_desc(struct udevice *dev, char *buf, int size);
+
+/**
+ * tpm_xfer() - send data to the TPM and get response
+ *
+ * This first uses the device's send() method to send the bytes. Then it calls
+ * recv() to get the reply. If recv() returns -EAGAIN then it will delay a
+ * short time and then call recv() again.
+ *
+ * Regardless of whether recv() completes successfully, it will then call
+ * cleanup() to finish the transaction.
+ *
+ * Note that the outgoing data is inspected to determine command type
+ * (ordinal) and a timeout is used for that command type.
+ *
+ * @sendbuf - buffer of the data to send
+ * @send_size size of the data to send
+ * @recvbuf - memory to save the response to
+ * @recv_len - pointer to the size of the response buffer
+ *
+ * Returns 0 on success (and places the number of response bytes at
+ * recv_len) or -ve on failure.
+ */
+int tpm_xfer(struct udevice *dev, const uint8_t *sendbuf, size_t send_size,
+ uint8_t *recvbuf, size_t *recv_size);
+
+#endif /* CONFIG_DM_TPM */
+
/**
* Initialize TPM device. It must be called before any TPM commands.
*
projects / karo-tx-uboot.git / blobdiff