* this is how the lowlevel part communicate with the outer world
*/
-#if defined(CONFIG_USB_UHCI) || defined(CONFIG_USB_OHCI) || \
- defined(CONFIG_USB_EHCI) || defined(CONFIG_USB_OHCI_NEW) || \
- defined(CONFIG_USB_SL811HS) || defined(CONFIG_USB_ISP116X_HCD) || \
- defined(CONFIG_USB_R8A66597_HCD) || defined(CONFIG_USB_DAVINCI) || \
- defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
- defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
- defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
- defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_MUSB_SUNXI) || \
- defined(CONFIG_USB_XHCI) || defined(CONFIG_USB_DWC2) || \
- defined(CONFIG_USB_EMUL)
-
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_DM_USB)
-int usb_reset_root_port(void);
+#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_DM_USB)
+int usb_reset_root_port(struct usb_device *dev);
#else
-#define usb_reset_root_port()
+#define usb_reset_root_port(dev)
#endif
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
-#if defined CONFIG_USB_EHCI || defined CONFIG_MUSB_HOST || defined(CONFIG_DM_USB)
+#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_HOST || defined(CONFIG_DM_USB)
struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe,
int queuesize, int elementsize, void *buffer, int interval);
int destroy_int_queue(struct usb_device *dev, struct int_queue *queue);
* in boards init functions e.g. udc_disconnect() used for
* forced device disconnection from host.
*/
-#elif defined(CONFIG_USB_GADGET_PXA2XX)
-
extern void udc_disconnect(void);
-#endif
-
/*
* board-specific hardware initialization, called by
* usb drivers and u-boot commands
/* routines */
int usb_init(void); /* initialize the USB Controller */
int usb_stop(void); /* stop the USB Controller */
+int usb_detect_change(void); /* detect if a USB device has been (un)plugged */
int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol);
int usb_clear_halt(struct usb_device *dev, int pipe);
int usb_string(struct usb_device *dev, int index, char *buf, size_t size);
int usb_set_interface(struct usb_device *dev, int interface, int alternate);
+int usb_get_port_status(struct usb_device *dev, int port, void *data);
/* big endian -> little endian conversion */
/* some CPUs are already little endian e.g. the ARM920T */
/**
* struct usb_driver_entry - Matches a driver to its usb_device_ids
- * @compatible: Compatible string
- * @data: Data for this compatible string
+ * @driver: Driver to use
+ * @match: List of match records for this driver, terminated by {}
*/
struct usb_driver_entry {
struct driver *driver;
const struct usb_device_id *match;
};
-#define USB_DEVICE(__name, __match) \
+#define USB_DEVICE_ID_MATCH_DEVICE \
+ (USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_PRODUCT)
+
+/**
+ * USB_DEVICE - macro used to describe a specific usb device
+ * @vend: the 16 bit USB Vendor ID
+ * @prod: the 16 bit USB Product ID
+ *
+ * This macro is used to create a struct usb_device_id that matches a
+ * specific device.
+ */
+#define USB_DEVICE(vend, prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \
+ .idVendor = (vend), \
+ .idProduct = (prod)
+
+#define U_BOOT_USB_DEVICE(__name, __match) \
ll_entry_declare(struct usb_driver_entry, __name, usb_driver_entry) = {\
.driver = llsym(struct driver, __name, driver), \
.match = __match, \
* is read). This should be NULL for EHCI, which does not need this.
*/
int (*alloc_device)(struct udevice *bus, struct usb_device *udev);
+
+ /**
+ * reset_root_port() - Reset usb root port
+ */
+ int (*reset_root_port)(struct udevice *bus, struct usb_device *udev);
};
#define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
#define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
-#ifdef CONFIG_MUSB_HOST
-int usb_reset_root_port(void);
-#endif
-
/**
* usb_get_dev_index() - look up a device index number
*
*/
struct usb_device *usb_get_dev_index(struct udevice *bus, int index);
-/**
- * usb_legacy_port_reset() - Legacy function to reset a hub port
- *
- * @hub: Hub device
- * @portnr: Port number (1=first)
- */
-int usb_legacy_port_reset(struct usb_device *hub, int portnr);
-
/**
* usb_setup_device() - set up a device ready for use
*
* @dev: USB device pointer. This need not be a real device - it is
* common for it to just be a local variable with its ->dev
- * member (i.e. @dev->dev) set to the parent device
+ * member (i.e. @dev->dev) set to the parent device and
+ * dev->portnr set to the port number on the hub (1=first)
* @do_read: true to read the device descriptor before an address is set
* (should be false for XHCI buses, true otherwise)
* @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB)
- * @portnr: Port number on hub (1=first) or 0 for none
* @return 0 if OK, -ve on error */
int usb_setup_device(struct usb_device *dev, bool do_read,
- struct usb_device *parent, int portnr);
+ struct usb_device *parent);
/**
* usb_hub_scan() - Scan a hub and find its devices
projects / karo-tx-uboot.git / blobdiff