X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=CHANGELOG;h=10ae064218a2fd4a84943346aa0063e7d76008f9;hp=5b26e95abb32da0e61ac0646122fe38fe8e83a25;hb=38b99261c13a54ea955a8fe9176e73256486362f;hpb=c7de829c796978e519984df2f1c8cfcf921a39a4 diff --git a/CHANGELOG b/CHANGELOG index 5b26e95abb..10ae064218 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,7 +1,485 @@ ====================================================================== -Changes since for U-Boot 0.1.0: +Changes since U-Boot 0.3.1: ====================================================================== +* Add zero-copy ramdisk support (requires corresponding kernel support!) + +* Patch by Kyle Harris, 20 May 2003: + In preparation for an ixp port, rename cpu/xscale and arch-xscale + into cpu/pxa and arch-pxa. + +* Patch by Stefan Roese, 23 May 2003: + - IBM PPC405EP port added. + - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not + UART0) is used as default U-Boot console. PPC4xx only! + - esd ASH405 board added (PPC405EP based). + - BUBINGA405EP board added (PPC405EP based - IBM Eval Board). + - esd CPCI405AB board added. + - esd PMC405 board added. + - Update of some esd boards. + +* Patch by Denis Peter, 19 Mai 2003: + add support for the MIP405-3 board + +* Patch by Dave Ellis, 22 May 2003: + Fix problem with only partially cleared .bss segment + +* Patch by Rune Torgersen, 12 May 2003: + get PCI to work on a MPC8266ADS board; incorporate change to + cpu/mpc8260/pci.c to enable overrides of PCI memory parameters + +* Patch by Nye Liu, 1 May 2003: + minor patches for the FADS8xx + +* Patch by Thomas Schäfer, 28 Apr 2003: + Fix SPD handling for 256 ECC DIMM on Walnut + +* Add support for arbitrary bitmaps for TRAB's VFD command; + allow to pass boot bitmap addresses in environment variables; + allow for zero boot delay + +* Patch by Christian Geißinger, 19 May 2002: + On TRAB: wait until the dummy byte has been completely sent + +* Patch by David Updegraff, 22 Apr 2003: + update for CrayL1 board + +* Patch by Pantelis Antoniou, 21 Apr 2003: + add boot support for ARTOS (a proprietary OS) + +* Patch by Steven Scholz, 11 Apr 2003: + Add support for RTC DS1338 + +* Patch by Rod Boyce, 24 Jan 2003: + Fix counting of extended partitions in diskboot command + +* Patch by Christophe Lindheimer, 20 May 2003: + allow the use of CFG_LOADS when CFG_NO_FLASH is set + +* Fix SDRAM timing on Purple board + +* Add support for CompactFlash on ATC board + (includes support for Intel 82365 and compatible PC Card controllers, + and Yenta-compatible PCI-to-CardBus controllers) + +* Patch by Mathijs Haarman, 08 May 2003: + Add lan91c96 driver (tested on Lubbock and custom PXA250 board only) + +* Fix problem with usage of "true" (undefined in current versions of bfd.h) + +* Add support for Promess ATC board + +* Patch by Keith Outwater, 28 Apr 2003: + - Miscellaneous corrections and additions to GEN860T board specific code. + - Added GEN860_SC variant to GEN860T. + - Miscellaneous corrections to GEN860T documentation. + - Correct duplicate entry in U-Boot CREDITS file. + - Add GEN860T_SC entry in MAINTAINERS file. + - Update CREDITS file with GEN860T_SC info. + +* Update Smiths Aerospace addresses in MAINTAINERS file + +* Fix error handling in hush's version of "run" command + +* LWMON extensions: + - Splashscreen support + - modem support + - sysmon support + - temperature dependend enabling of LCD + +* Allow booting from old "PPCBoot" disk partitions + +* Add support for TQM8255 Board / MPC8255 CPU + +====================================================================== +Changes for U-Boot 0.3.1: +====================================================================== + +* Make sure Block Lock Bits get cleared in R360MPI flash driver + +* MPC823 LCD driver: Fill color map backwards, to allow for steady + display when Linux takes over + +* Patch by Erwin Rol, 27 Feb 2003: + Add support for RTEMS (this time for real). + +* Add support for "bmp info" and "bmp display" commands to load + bitmap images; this can be used (for example in a "preboot" + command) to display a splash screen very quickly after poweron. + +* Add support for 133 MHz clock on INCA-IP board + +* Patch by Lutz Dennig, 10 Apr 2003: + Update for R360MPI board + +* Add new meaning to "autostart" environment variable: + If set to "no", a standalone image passed to the + "bootm" command will be copied to the load address + (and eventually uncompressed), but NOT be started. + This can be used to load and uncompress arbitrary + data. + +* Patch by Stefan Roese, 10 Apr 2003: + Changed DHCP client to use IP address from server option field #54 + from the OFFER packet in the server option field #54 in the REQUEST + packet. This fixes a problem using a Windows 2000 DHCP server, + where the DHCP-server is not the TFTP-server. + +* Set max brightness for MN11236 displays on TRAB board + +* Add support for TQM862L modules + +====================================================================== +Changes for U-Boot 0.3.0: +====================================================================== + +* Patch by Arun Dharankar, 4 Apr 2003: + Add IDMA example code (tested on 8260 only) + +* Add support for Purple Board (MIPS64 5Kc) + +* Add support for MIPS64 5Kc CPUs + +* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS + +* Patch by Denis Peter, 04 Apr 2003: + - update MIP405-4 board + +* Patch by Stefan Roese, 4 Apr 2003: + - U-Boot version environment variable "ver" added + (CONFIG_VERSION_VARIABLE). + - Changed PPC405GPr version from A to B. + - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1. + +* Patches by Denis Peter, 03 April 2003: + - fix PCI IRQs on MPL boards + - fix two more un-relocated pointer problems + +* Fix behaviour of "run" command: + - print error message iv variable does not exist + - terminate processing of arguments in case of error + +* Patches by Peter Figuli, 10 Mar 2003 + - Add support for BTUART on PXA platform + - Add support for WEP EP250 (PXA) board + +* Fix flash problems on INCA-IP; add tool to allow bruning images to + flash using a BDI2000 + +* Implement fix for I2C Edge Conditions problem for all boards that + use the bit-banging driver (common/soft_i2c.c) + +* Patch by Martin Winistoerfer, 23 Mar 2003 + - Add port to MPC555/556 microcontrollers + - Add support for cmi customer board with + Intel 28F128J3A, 28F320J3A or 28F640J3A flash. + +* Patch by Rick Bronson, 28 Mar 2003: + - fix common/cmd_nand.c + +* Patch by Arun Dharankar, 24 Mar 2003: + - add threads / scheduler example code + +* Add patches by Robert Schwebel, 31 Mar 2003: + - add ctrl-c support for kermit download + - align bdinfo output on ARM + - csb226 board: bring in sync with innokom/memsetup.S + - csb226 board: fix MDREFR handling + - misc doc fixes / extensions + - innokom board: cleanup, MDREFR fix in memsetup.S, config update + - add BOOT_PROGRESS to armlinux.c + +* Add CPU ID, version, and clock speed for INCA-IP + +* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board: + - fix SRAM and SDRAM memory sizing + - add status LED support + - add MAC address for second (SCC1) ethernet port + +* Update default environment for TQM8260 board + +* Patch by Rick Bronson, 16 Mar 2003: + - Add NAND flash support for reading, writing, and erasing NAND + flash (certain forms of which are called SmartMedia). + - Add support for Atmel AT91RM9200DK ARM920T based development kit. + +* Patches by Robert Schwebel, 19 Mar 2003: + - use arm-linux-gcc as default compiler for ARM + - fix i2c fixup code + - fix missing baudrate setting + - added $loadaddr / CFG_LOAD_ADDR support to loadb + - moved "ignoring trailing characters" _before_ u-boot wants to + print out diagnostics messages; removes bogus characters at the + end of transmission + +* Patch by John Zhan, 18 Mar 2003: + Add support for SinoVee Microsystems SC8xx boards + +* Patch by Rolf Offermanns, 21 Mar 2003: + ported the dnp1110 related changes from the current armboot cvs to + current u-boot cvs. smc91111 does not work. problem marked in + smc91111.c, grep for "FIXME". + +* Patch by Brian Auld, 25 Mar 2003: + Add support for STM flash chips on ebony board + +* Add PCI support for MPC8250 Boards (PM825 module) + +* Patch by Stefan Roese, 25 Mar 2003: + - PCI405 update. + +* Patch by Stefan Roese, 20 Mar 2003: + - CPCI4052 update (support for revision 3). + - Set edge conditioning circuitry on PPC405GPr for compatibility + to existing PPC405GP designs. + - Clip udiv to 5 bits on PPC405 (serial.c). + +* Extend INCAIP board support: + - add automatic RAM size detection + - add "bdinfo" command + - pass flash address and size to Linux kernel + - switch to 150 MHz clock + +* Avoid flicker on the TRAB's VFD by synchronizing the enable with + the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 + boards, version 153 for Rev. 200 boards). + +* Patch by Vladimir Gurevich, 12 Mar 2003: + Fix relocation problem of statically initialized string pointers + in common/cmd_pci.c + +* Patch by Kai-Uwe Blöm, 12 Mar 2003: + Cleanup & bug fixes for JFFS2 code: + - the memory mangement was broken. It caused havoc on malloc by + writing beyond the block boundaries. + - the length calculation for files was wrong, sometimes resulting + in short file reads. + - data copying now optionally takes fragment version numbers into + account, to avoid copying from older data. + See doc/README.JFFS2 for details. + +* Patch by Josef Wagner, 12 Mar 2003: + - 16/32 MB and 50/80 MHz support with auto-detection for IP860 + - ETH05 and BEDBUG support for CU824 + - added support for MicroSys CPC45 + - new BOOTROM/FLASH0 and DOC base for PM826 + +* Patch by Robert Schwebel, 12 Mar 2003: + Fix the chpart command on innokom board + +* Name cleanup: + mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h + s/PPCBoot/U-Boot/ in some files + s/pImage/uImage/ in some files + +* Patch by Detlev Zundel, 15 Jan 2003: + Fix '' command line quoting + +* Patch by The LEOX team, 19 Jan 2003: + - add support for the ELPT860 board + - add support for Dallas ds164x RTC + +* Patches by David Müller, 31 Jan 2003: + - minimal setup for CardBus bridges + - add EEPROM read/write support in the CS8900 driver + - add support for the builtin I2C controller in the Samsung s3c24x0 chips + - add support for MPL's VCMA9 (Samsung s3c2410 based) board + +* Patch by Steven Scholz, 04 Feb 2003: + add support for RTC DS1307 + +* Patch by Reinhard Meyer, 5 Feb 2003: + fix PLPRCR/SCCR init sequence on 8xx to allow for + changes of EBDF by software + +* Patch by Vladimir Gurevich, 07 Feb 2003: + "API-compatibility patch" for 4xx I2C driver + +* TRAB fixes / extensions: + - Restore VFD brightness as saved in environment + - add support for FGujitsu flashes + - make sure both buzzers are turned off (drive low level) + +* Patches by Robert Schwebel, 06 Mar 2003: + - fix bug in BOOTP code (must use NetCopyIP) + - update of CSB226 port + - clear BSS segment on XScale + - added support for i2c_init_board() function + - update to the Innokom plattform + +* Extend support for redundand environments for configurations where + environment size < sector size + +* Patch by Rune Torgersen, 13 Feb 2003: + Add support for Motorola MPC8266ADS board + +* Patch by Kyle Harris, 19 Feb 2003: + patches for the Intel lubbock board: + memsetup.S - general cleanup (based on Robert's csb226 code) + flash.c - overhaul, actually works now + lubbock.c - fix init funcs to return proper value + +* Patch by Kenneth Johansson, 26 Feb 2003: + - Fixed off by one in RFTA calculation. + - No need to abort when LDF is lower than we can program it's only + minimum timing so clamp it to what we can do. + - Takes function pointer to function for reading the spd_nvram. Usefull + for faking data or hardcode a module without the nvram. + - fix other user for above change + - fix some comments. + +* Patches by Brian Waite, 26 Feb 2003: + - fix port for evb64260 board + - fix PCI for evb64260 board + - fix PCI scan + +* Patch by Reinhard Meyer, 1 Mar 2003: + Add support for EMK TOP860 Module + +* Patch by Yuli Barcohen, 02 Mar 2003: + Add SPD EEPROM support for MPC8260ADS board + +* Patch by Robert Schwebel, 21 Jan 2003: + - Add support for Innokom board + - Don't complain if "install" fails + - README cleanup (remove duplicated lines) + - Update PXA header files + +* Add documentation for existing POST code (doc/README.POST) + +* Patch by Laudney Ren, 15 Jan 2003: + Fix handling of redundand environment in "tools/envcrc.c" + +* Patch by Detlev Zundel, 28 Feb 2003: + Add bedbug support for 824x systems + +* Add support for 16 MB flash configuration of TRAB board + +* Patch by Erwin Rol, 27 Feb 2003: + Add support for RTEMS + +* Add image information to README + +* Patch by Stefan Roese, 18 Feb 2003: + CPCIISER4 configuration updated. + +* Patch by Stefan Roese, 17 Feb 2003: + Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port). + +* Patch by Stefan Roese, 13 Feb 2003: + Add "pcidelay" environment variable (in ms, enabled via + CONFIG_PCI_BOOTDELAY). + PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after + RST# to respond to configuration cycles (33MHz -> 1s). + +* Fix dual PCMCIA slot support (when running with just one + slot populated) + +* Add VFD type detection to trab board + +* extend drivers/cs8900.c driver to synchronize ethaddr environment + variable with value in the EEPROM + +* Patch by Stefan Roese, 10 Feb 2003: + Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c) + +* Add support for MIPS32 4Kc CPUs + +* Add support for INCA-IP Board + +====================================================================== +Changes for U-Boot 0.2.2: +====================================================================== + +* Add dual ethernet support on PM826 + +* Add support for LXT971 PHY on PM826 + +* Patch by Tord Andersson, 16 Jan 2003: + Fix flash sector count for TQM8xxL + +* Fix I2C EEPROM problem on ICU862 board (would only write the first + 16 bytes out of each 32 byte block) + +====================================================================== +Changes for U-Boot 0.2.1: +====================================================================== + +* Add support for V37 board + (patch by Jón Benediktsson, 11 Dec 2002) + +* Update baudrate in bd_info when it gets changed + +* Add watchdog trigger points while waiting for serial port + (so far only 8xx -- needed on LWMON with 100ms watchdog) + +* Improve command line tool to access the U-Boot's environment + (figuration of the utility, using a config file) + +* Add single quote support for (old) command line parser + +* Switch LWMON board default config from FRAM to EEPROM; + in POST, EEPROM shows up on 8 addresses + +====================================================================== +Changes for U-Boot 0.2.0: +====================================================================== + +* Use 1-byte-read instead of -write for iprobe() function + Add i2c commands to PM826 config + +* extend I2C POST code: check for list on known addresses + +* Improve log buffer code; use "loglevel" to decide which messages + to log on the console, too (like in Linux); get rid of "logstart" + +* Add command line tool to access the U-Boot's environment + (board-specific for TRAB now, to be fixed later) + +* Patch by Hans-Joerg Frieden, 06 Dec 2002 + Fix misc problems with AmigaOne support + +* Patch by Chris Hallinan, 3 Dec 2002: + minor cleanup to the MPC8245 EPIC driver + +* Patch by Pierre Aubert , 28 Nov 2002 + Add support for external (SIU) interrupts on MPC8xx + +* Patch by Pierre Aubert , 28 Nov 2002 + Fix nested syscalls bug in standalone applications + +* Patch by David Müller, 27 Nov 2002: + fix output of "pciinfo" command for CardBus bridge devices. + +* Fix bug in TQM8260 board detection - boards got stuck when board ID + was not readable + +* Add LED indication for IDE activity on KUP4K board + +* Fix startup problems with VFD display on TRAB + +* Patch by Pierre Aubert, 20 Nov 2002 + Add driver for Epson SED13806 graphic controller. + Add support for BMP logos in cfb_console driver. + +* Added support for both PCMCIA slots (at the same time!) on MPC8xx + +* Patch by Rod Boyce, 21 Nov 2002: + fix PCMCIA on MBX8xx board + +* Patch by Pierre Aubert , 21 Nov 2002 + Add CFG_CPM_POST_WORD_ADDR to make the offset of the + bootmode word in DPRAM configurable + +* Patch by Daniel Engström, 18 Nov 2002: + Fixes for x86 port (mostly strings issues) + +* Patch by Ken Chou, 18 Nov 2002: + Fix for natsemi NIC cards (DP83815) + +* Patch by Pierre Aubert, 19 Nov 2002: + fix a bug for the MII configuration, and some warnings + * Patch by Thomas Frieden, 13 Nov 2002: Add code for AmigaOne board (preliminary merge to U-Boot, still WIP)