X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=CHANGELOG;h=2fa9a94a62fc00fa6702a4392ff81b9f606b2423;hp=35c285db3702b43ba39601eceb018505eee9a058;hb=cdd8a0f1517b89349265465bf334db32e2304b45;hpb=2262cfeef91458b01a1bfe3812ccbbfdf8b82807 diff --git a/CHANGELOG b/CHANGELOG index 35c285db37..2fa9a94a62 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,7 +1,301 @@ ====================================================================== -Changes since for U-Boot 0.1.0: +Changes since U-Boot 0.2.2: ====================================================================== +* Patch by Rick Bronson, 16 Mar 2003: + - Add NAND flash support for reading, writing, and erasing NAND + flash (certain forms of which are called SmartMedia). + - Add support for Atmel AT91RM9200DK ARM920T based development kit. + +* Patches by Robert Schwebel, 19 Mar 2003: + - use arm-linux-gcc as default compiler for ARM + - fix i2c fixup code + - fix missing baudrate setting + - added $loadaddr / CFG_LOAD_ADDR support to loadb + - moved "ignoring trailing characters" _before_ u-boot wants to + print out diagnostics messages; removes bogus characters at the + end of transmission + +* Patch by John Zhan, 18 Mar 2003: + Add support for SinoVee Microsystems SC8xx boards + +* Patch by Rolf Offermanns, 21 Mar 2003: + ported the dnp1110 related changes from the current armboot cvs to + current u-boot cvs. smc91111 does not work. problem marked in + smc91111.c, grep for "FIXME". + +* Patch by Brian Auld, 25 Mar 2003: + Add support for STM flash chips on ebony board + +* Add PCI support for MPC8250 Boards (PM825 module) + +* Patch by Stefan Roese, 25 Mar 2003: + - PCI405 update. + +* Patch by Stefan Roese, 20 Mar 2003: + - CPCI4052 update (support for revision 3). + - Set edge conditioning circuitry on PPC405GPr for compatibility + to existing PPC405GP designs. + - Clip udiv to 5 bits on PPC405 (serial.c). + +* Extend INCAIP board support: + - add automatic RAM size detection + - add "bdinfo" command + - pass flash address and size to Linux kernel + - switch to 150 MHz clock + +* Avoid flicker on the TRAB's VFD by synchronizing the enable with + the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 + boards, version 153 for Rev. 200 boards). + +* Patch by Vladimir Gurevich, 12 Mar 2003: + Fix relocation problem of statically initialized string pointers + in common/cmd_pci.c + +* Patch by Kai-Uwe Blöm, 12 Mar 2003: + Cleanup & bug fixes for JFFS2 code: + - the memory mangement was broken. It caused havoc on malloc by + writing beyond the block boundaries. + - the length calculation for files was wrong, sometimes resulting + in short file reads. + - data copying now optionally takes fragment version numbers into + account, to avoid copying from older data. + See doc/README.JFFS2 for details. + +* Patch by Josef Wagner, 12 Mar 2003: + - 16/32 MB and 50/80 MHz support with auto-detection for IP860 + - ETH05 and BEDBUG support for CU824 + - added support for MicroSys CPC45 + - new BOOTROM/FLASH0 and DOC base for PM826 + +* Patch by Robert Schwebel, 12 Mar 2003: + Fix the chpart command on innokom board + +* Name cleanup: + mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h + s/PPCBoot/U-Boot/ in some files + s/pImage/uImage/ in some files + +* Patch by Detlev Zundel, 15 Jan 2003: + Fix '' command line quoting + +* Patch by The LEOX team, 19 Jan 2003: + - add support for the ELPT860 board + - add support for Dallas ds164x RTC + +* Patches by David Müller, 31 Jan 2003: + - minimal setup for CardBus bridges + - add EEPROM read/write support in the CS8900 driver + - add support for the builtin I2C controller in the Samsung s3c24x0 chips + - add support for MPL's VCMA9 (Samsung s3c2410 based) board + +* Patch by Steven Scholz, 04 Feb 2003: + add support for RTC DS1307 + +* Patch by Reinhard Meyer, 5 Feb 2003: + fix PLPRCR/SCCR init sequence on 8xx to allow for + changes of EBDF by software + +* Patch by Vladimir Gurevich, 07 Feb 2003: + "API-compatibility patch" for 4xx I2C driver + +* TRAB fixes / extensions: + - Restore VFD brightness as saved in environment + - add support for FGujitsu flashes + - make sure both buzzers are turned off (drive low level) + +* Patches by Robert Schwebel, 06 Mar 2003: + - fix bug in BOOTP code (must use NetCopyIP) + - update of CSB226 port + - clear BSS segment on XScale + - added support for i2c_init_board() function + - update to the Innokom plattform + +* Extend support for redundand environments for configurations where + environment size < sector size + +* Patch by Rune Torgersen, 13 Feb 2003: + Add support for Motorola MPC8266ADS board + +* Patch by Kyle Harris, 19 Feb 2003: + patches for the Intel lubbock board: + memsetup.S - general cleanup (based on Robert's csb226 code) + flash.c - overhaul, actually works now + lubbock.c - fix init funcs to return proper value + +* Patch by Kenneth Johansson, 26 Feb 2003: + - Fixed off by one in RFTA calculation. + - No need to abort when LDF is lower than we can program it's only + minimum timing so clamp it to what we can do. + - Takes function pointer to function for reading the spd_nvram. Usefull + for faking data or hardcode a module without the nvram. + - fix other user for above change + - fix some comments. + +* Patches by Brian Waite, 26 Feb 2003: + - fix port for evb64260 board + - fix PCI for evb64260 board + - fix PCI scan + +* Patch by Reinhard Meyer, 1 Mar 2003: + Add support for EMK TOP860 Module + +* Patch by Yuli Barcohen, 02 Mar 2003: + Add SPD EEPROM support for MPC8260ADS board + +* Patch by Robert Schwebel, 21 Jan 2003: + - Add support for Innokom board + - Don't complain if "install" fails + - README cleanup (remove duplicated lines) + - Update PXA header files + +* Add documentation for existing POST code (doc/README.POST) + +* Patch by Laudney Ren, 15 Jan 2003: + Fix handling of redundand environment in "tools/envcrc.c" + +* Patch by Detlev Zundel, 28 Feb 2003: + Add bedbug support for 824x systems + +* Add support for 16 MB flash configuration of TRAB board + +* Patch by Erwin Rol, 27 Feb 2003: + Add support for RTEMS + +* Add image information to README + +* Patch by Stefan Roese, 18 Feb 2003: + CPCIISER4 configuration updated. + +* Patch by Stefan Roese, 17 Feb 2003: + Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port). + +* Patch by Stefan Roese, 13 Feb 2003: + Add "pcidelay" environment variable (in ms, enabled via + CONFIG_PCI_BOOTDELAY). + PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after + RST# to respond to configuration cycles (33MHz -> 1s). + +* Fix dual PCMCIA slot support (when running with just one + slot populated) + +* Add VFD type detection to trab board + +* extend drivers/cs8900.c driver to synchronize ethaddr environment + variable with value in the EEPROM + +* Patch by Stefan Roese, 10 Feb 2003: + Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c) + +* Add support for MIPS32 4Kc CPUs + +* Add support for INCA-IP Board + +====================================================================== +Changes for U-Boot 0.2.2: +====================================================================== + +* Add dual ethernet support on PM826 + +* Add support for LXT971 PHY on PM826 + +* Patch by Tord Andersson, 16 Jan 2003: + Fix flash sector count for TQM8xxL + +* Fix I2C EEPROM problem on ICU862 board (would only write the first + 16 bytes out of each 32 byte block) + +====================================================================== +Changes for U-Boot 0.2.1: +====================================================================== + +* Add support for V37 board + (patch by Jón Benediktsson, 11 Dec 2002) + +* Update baudrate in bd_info when it gets changed + +* Add watchdog trigger points while waiting for serial port + (so far only 8xx -- needed on LWMON with 100ms watchdog) + +* Improve command line tool to access the U-Boot's environment + (figuration of the utility, using a config file) + +* Add single quote support for (old) command line parser + +* Switch LWMON board default config from FRAM to EEPROM; + in POST, EEPROM shows up on 8 addresses + +====================================================================== +Changes for U-Boot 0.2.0: +====================================================================== + +* Use 1-byte-read instead of -write for iprobe() function + Add i2c commands to PM826 config + +* extend I2C POST code: check for list on known addresses + +* Improve log buffer code; use "loglevel" to decide which messages + to log on the console, too (like in Linux); get rid of "logstart" + +* Add command line tool to access the U-Boot's environment + (board-specific for TRAB now, to be fixed later) + +* Patch by Hans-Joerg Frieden, 06 Dec 2002 + Fix misc problems with AmigaOne support + +* Patch by Chris Hallinan, 3 Dec 2002: + minor cleanup to the MPC8245 EPIC driver + +* Patch by Pierre Aubert , 28 Nov 2002 + Add support for external (SIU) interrupts on MPC8xx + +* Patch by Pierre Aubert , 28 Nov 2002 + Fix nested syscalls bug in standalone applications + +* Patch by David Müller, 27 Nov 2002: + fix output of "pciinfo" command for CardBus bridge devices. + +* Fix bug in TQM8260 board detection - boards got stuck when board ID + was not readable + +* Add LED indication for IDE activity on KUP4K board + +* Fix startup problems with VFD display on TRAB + +* Patch by Pierre Aubert, 20 Nov 2002 + Add driver for Epson SED13806 graphic controller. + Add support for BMP logos in cfb_console driver. + +* Added support for both PCMCIA slots (at the same time!) on MPC8xx + +* Patch by Rod Boyce, 21 Nov 2002: + fix PCMCIA on MBX8xx board + +* Patch by Pierre Aubert , 21 Nov 2002 + Add CFG_CPM_POST_WORD_ADDR to make the offset of the + bootmode word in DPRAM configurable + +* Patch by Daniel Engström, 18 Nov 2002: + Fixes for x86 port (mostly strings issues) + +* Patch by Ken Chou, 18 Nov 2002: + Fix for natsemi NIC cards (DP83815) + +* Patch by Pierre Aubert, 19 Nov 2002: + fix a bug for the MII configuration, and some warnings + +* Patch by Thomas Frieden, 13 Nov 2002: + Add code for AmigaOne board + (preliminary merge to U-Boot, still WIP) + +* Patch by Jon Diekema, 12 Nov 2002: + - Adding URL for IEEE OUI lookup + - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED + being defined. + - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and + root-on-nfs macros are designed to switch how the default boot + method gets defined. + * Patch by Daniel Engström, 13 Nov 2002: Add support for i386 architecture and AMD SC520 board