X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=CHANGELOG;h=5db2e2c5689e649b76c01885d637b8674d14d94d;hp=e9a7998dc1fbe3c31daeffe1b8ebbd5804ae0865;hb=e58cf2a0cfeb357faa134af1e12b96f4109af360;hpb=281e00a3be453a169d854f824a460359d10f92bb diff --git a/CHANGELOG b/CHANGELOG index e9a7998dc1..5db2e2c568 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,7 +1,470 @@ ====================================================================== -Changes since U-Boot 1.1.1: +Changes for U-Boot 1.1.3: ====================================================================== +* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board + +* Cleanup USB and partition defines + +* Add support for ext2 filesystems and image timestamps to TQM5200 board + +* Add reset code for Coral-P on INKA4x0 board + +* Patch by Martin Krause, 28 Jun 2004: + Update for TRAB board. + +* Fix some missing "volatile"s in MPC5xxx FEC driver + +* Fix cirrus voltage detection (for CPC45) + +* Fix byteorder problem in usbboot and scsiboot commands. + +* Patch by Cajus Hahn, 04 Feb 2005: + - don't insist on leading '/' for filename in ext2load + - set default partition to useful value (1) in ext2load + +* Patch by Andrew Dyer, 08 Jan 2005: + fix wrong return codes in ext2 code + +* Removed '--no-warn-mismatch' option from Makefile. This option + makes 'ld' to overlook binary objects compatibility. + +* Moved $(PLATFORM_LIBS) from the library group (--start-group ... + --end-group) outside of the group. This will make 'ld' to do + _multiple_ search in the library group when resolving symbol + references and do only a _single_ seach in libgcc.a after the group + search. + +* Fix stability problems on CPC45 board again. + +* Make image detection for diskboot / usbboot / scsiboot more robust + (also check header checksum) + +* Update CPC45 board configuration. + +* Add USB and PCI support for INKA4x0 board + +* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO). + +* Code cleanup + +* Patch by Robin Getz, 13 Oct 2004: + Add standalone application to change SMC91C111 MAC addresses, + see examples/README.smc91111_eeprom + +* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004: + Fix Flash support for ARM Integrator CP. + +* Patch by Richard Woodruff, 10 Jan 2005: + Update support for OMAP2420 (ARM11) and H4 board: + o clean up and add new types to H4 memory probe code. + o fix to work with internal boot. + o added PRCM config III operation. + o fix marginal flash timings. + o add revison ATAG usage. + o enable voltage scaling at power chip. + o fix compile error for i2c. + +* Fix network problem (error when receiving multiple ARP packets) + +* Patch by Daniel Poirot, 12 Oct 2004: + Add support for Wind River sbc405 board + +* Patch by Rainer Brestan, 12 Oct 2004: + Make examples/Makefile more robust + +* Patch by Sam Song, 11 October 2004: + - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board + - Adjust CPU:BUS frequency ratio 1:1 when core frequency + less than 50MHz + +* Patch by Sam Song, 10 Oct 2004: + Fix a parameter error in run_command() in main.c + +* Patch by Richard Woodruff, 01 Oct 2004: + add support for the TI OMAP2420 processor and its H4 reference + board + +* Patch by Christian Pellegrin, 24 Sep 2004: + Added support for NE2000 compatible (DP8390, DP83902) NICs. + +* Patch by Leif Lindholm, 23 Sep 2004: + add support for the AMD db1550 board + +* Patch by Travis Sawyer, 15 Sep 2004: + Add CONFIG_SERIAL_MULTI support for ppc4xx, + update README.serial_multi + +* Patches by David Snowdon, 07 Sep 2004: + - add u-boot.hex target in the top level Makefile + - add support for the UNSW/NICTA PLEB 2 board (pleb2) + - use -mtune=xscale and -march=armv5 options for PXA + +* Patch by Florian Schlote, 08 Sep 2004: + Add support for SenTec-COBRA5272-board (Coldfire). + +* Patch by Gleb Natapov, 07 Sep 2004: + mpc824x: set PCI latency timer to a sane value + (is 0 after reset). + +* Patch by Kurt Stremerch, 03 Sep 2004: + Add bitstream configuration option for fpga command (Xilinx only). + +* Patch by Kurt Stremerch, 03 Sep 2004: + Add Xilinx Spartan2E family FPGA support + +* Patch by Jeff Angielski, 02 Sep 2004: + Add Added support for H2 revision of the EP8260 board. + Fixed formatting for some of the EP8260 related source files. + +* Patch by Jon Loeliger, 02 Sep 2004: + Reset monitor size back to 256 so environment can be written + to flash on MPC85xx ADS and CDS releases. + +* Patch by Paolo Broggini, 02 Sep 2004: + Make BSS clearing on ARM systems more robust + +* Patch by Yue Hu and Joe, 01 Sep 2004: + - add PCI support for ixp425; + - add EEPRO100 suppor tfor ixdp425 board. + +* Fix problem with protected sector detection in driver/cfi_flash.c + +====================================================================== +Changes for U-Boot 1.1.2: +====================================================================== + +* Code cleanup, mostly for GCC-3.3.x + +* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to + pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for + additional ethernet addresses. + +* Cleanup drivers/i82365.c - avoid duplication of code + +* Fix bogus "cannot span across banks" flash error message + +* Code cleanup + +* Add support for CompactFlash for the CPC45 Board. + +* Fix problems with CMC_PU2 flash driver. + +* Cleanup: + - avoid trigraph warning in fs/ext2/ext2fs.c + - rename UC100 -> uc100 + +* Add support for UC100 board + +* Patch by Stefan Roese, 16 Dez 2004: + - ext2fs support added + - Tundra universe support added + - Coldfire MCF5249 support added (no preloader needed!) + - MCF5249 board TASREG added + - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405, + VOM405, WUH405 + - some esd boards updated + - memory commands "mdc" and "mwc" added for cyclic read/write + (CONFIG_MX_CYCLIC, see README for further description) + +* Add support for INKA4X0 board + +* Patch by Steven Scholz, 12 Dec 2004: + Fix typo in AT91 memory setup. + +* Patch by Martin Krause, 27 Oct 2004: + - add support for "STK52xx" board (including PS/2 multiplexer) + - add hardware detection for TQM5200 + +* Clean up CMC PU2 flash driver + +* Update MAINTAINERS file + +* Fix bug in MPC823 LCD driver + +* Fix udelay() on AT91RM9200 for delays < 1 ms. + +* Enable long help on CMC PU2 board; + fix reset issue; + increase CPU speed from 179 to 207 MHz. + +* Fix smc91111 ethernet driver for Xaeniax board (need to handle + unaligned tail part specially). + +* Update for AT91RM9200DK and CMC_PU2 boards: + - Enable booting directly from flash + - fix CMC_PU2 flash driver + +* Fix mkimage usage message + +* Map SRAM on NC650 board + +* Work around for Ethernet problems on Xaeniax board + +* Patch by TsiChung Liew, 23 Sep 2004: + - add support for MPC8220 CPU + - Add support for Alaska and Yukon boards + +* Fix configuration for ERIC board (needs more room) + +* Adjust MIPS compiler options at run-time depending on tools version + ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new, + "-mcpu=4kc" for old tools) + +* Add passing of the command line and memory size information to the + kernel on xaeniax board. + +* Enable NAND flash support for NC650 board. + +* Patch by Thomas Lange 07 Oct 2004: + Updated README for DBAu1x00 boards to match current status + +* Patch by Philippe Robin, 28 Sept 2004: + Fix Flash support for Versatile. + +* Patch by Roger Blofeld, 16 Sep 2004: + Fix timeout for DHCP command retry + +* Patch by Pantelis Antoniou, 14 Sep 2004: + Fix early serial hang when CONFIG_SERIAL_MULTI is defined. + +* Patch by Pantelis Antoniou, 14 Sep 2004: + Kick watchdog when bz-decompressing + +* Fix CFG_HZ problems on AT91RM9200 systems + [Remember: CFG_HZ should be 1000 on ALL systems!] + +* Patch by Gridish Shlomi, 30 Aug 2004: + - Add support to revA version of PQ27 and PQ27E. + - Reverted MPC8260ADS baudrate back to original 115200 + +* Patch by Hojin, 17 Sep 2004: + Fix typo in cfi_flash.c + +* Patch by Mark Jonas, 09 September 2004: + mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong + error message + +* Patch by Mark Jonas, 31 August 2004: + Added option CFG_XLB_PIPELINING to enable XLB pipelining. This + improves FTP performance for MPC5200 systems. Enabled for IceCube + by default. + +* Patch by Michael Bendzick, 30 Aug 2004: + - Improve platform.S code for omap1510inn that detects whether code + is running from SDRAM or not. Patch allows SDRAM to be configured + if code is running out of SRAM at 0x20000000. + +* Patch by Frederick Klatt, 30 Aug 2004: + Add support for the Wind River SBC8540/SBC8560 boards + +* Configure SX1 board to use drivers/cfi_flash.c + +* Patches by Michael Bendzick, 30 Aug 2004: + - Configure omap1510inn board to use drivers/cfi_flash.c + - Make drivers/cfi_flash.c protect environment and redundant + environment. + +* Patch by Steven Scholz, 23 Jun 2004: + - Add script (tools/img2brec.sh) to programm U-Boot into + (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L + +* Patches by Scott McNutt, 24 Aug 2004: + - Add support for Altera Nios-II processors. + - Add support for Psyent PCI-5441 board. + - Add support for Psyent PK1C20 board. + +* Patches by Jon Loeliger, 24 Aug 2004: + - Add support for the MPC8541 and MPC8555 CDS boards + - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR + - Convert MPC85xxADS to use common CFI flash driver + - Fix PCI window on MPC85xx; remove unneeded PCI initialization + from board_early_init_f() + - Provide SW workaround for PCI initialization on 85xx CDS + +* Patches by George G. Davis, 24 Aug 2004: + - Enable ramdisk/initrd tagged param support for omap1610h2_config + - Remove static network setup defaults from mx1ads_config + - update ARM boards to use constants from mach-types.h + +* Patch by Gary Jennejohn, 04 Oct 2004: + - fix I2C on at91rm9200 + - add support for Ricoh RS5C372A RTC + +* Patch by Gary Jennejohn, 01 Oct 2004: + - add support for CMC PU2 board + - add support for I2C on at91rm9200 + +* Patch by Gary Jennejohn, 28 Sep 2004: + fix baudrate handling on at91rm9200 + +* Patch by Yuli Barcohen, 22 Aug 2004: + - remove ZPC.1900 board-specific flash driver; + switch the port to generic CFI driver; + - port clean-up + +* Patch by Hinko Kocevar, 21 Aug 2004: + Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB + +* Clean up tools/bmp_logo.c to not add trailing white space + +* Patch by Hinko Kocevar, 21 Aug 2004: + - Group common framebuffer functions in common/lcd.c + - Group common framebuffer macros and #defines in include/lcd.h + - Provide calc_fbsize() for video ATAG + +* Patch by Sam Song, 21 August 2004: + - Fix a typo in README + - Align "(RO)" output for "flinfo" after "protect on" + - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency + ratio 1:1 when core frequency less than 50MHz + +* Patches by Hinko Kocevar, 21 Aug 2004: + - fix some "use of label at end of compound statement" warnings + - Define type of LCD panel on lubbock board if CONFIG_LCD is used + +* Patch by Steven Scholz, 16 Aug 2004: + - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)" + - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0 + - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/ + - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/ + into cpu/arm920t/$(SOC)/ + +* Patches by Sean Chang, 09 Aug 2004: + - Added support for both 8 and 16 bit mode access to System ACE CF + through MPU. + - Fixed missing System ACE CF device during get FAT partition info + in fat_register_device function. + - Enabled System ACE CF support on ML300. + +* Patch by Sean Chang, 09 Aug 2004: + Synch defines for saveenv and do_saveenv functions so they get + compiled under the same statement. + +* Patch by Sean Chang, 09 Aug 2004: + - Added I2C support for ML300. + - Added support for ML300 to read out its environment information + stored on the EEPROM. + - Added support to use board specific parameters as part of + U-Boot's environment information. + - Updated MLD files to support configuration for new features + above. + +* Patches by Travis Sawyer, 05 Aug 2004: + - Remove incorrect bridge settings for eth group 6 + - Add call to setup bridge in ppc_440x_eth_initialize + - Fix ppc_440x_eth_init to reset the phy only if its the + first time through, otherwise, just check the phy for the + autonegotiated speed/duplex. This allows the use of netconsole + - only print the speed/duplex the first time the phy is reset. + +* Patch by Shlomo Kut, 29 Mar 2004: + Add support for MKS Instruments "Quantum" board + +* Fix build problem with Cogent boards; + avoid using when using the host compiler + +* Patch by Ganapathi C, 04 Aug 2004: + Fix NFS timeout issue + +* Patch by Yuli Barcohen, 19 Jul 2004: + - Fix host tools building in Cygwin environment + - Fix header files search order for host tools + +* Patch by Tom Armistead, 19 Jul 2004: + Fix kgdb.S support for 74xx_75x cpu + +* Patch by Jon Loeliger, 15 Jul 2004: + Fix MPC85xx I2C driver + +* Fix problems with CDROM drive as slave device on Lite5200 IDE bus. + +* Patch by Stephen Williams, 15 July 2004 + Set the PCI class code for JSE board as part of PCI interface setup + +* Patch by Michael Bendzick, 15 Jul 2004: + Fix problem with writes with odd sizes in drivers/cfi_flash.c when + CFG_FLASH_USE_BUFFER_WRITE is set + +* Patch by Yuli Barcohen, 13 Jul 2004: + Allow clock setting on MPC866/MPC885 series chips according to + environment variable `cpuclk' + +* Patch by Yuli Barcohen, 20 Apr 2004: + Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x + +* Patch by Vincent Dubey, 24 Sep 2004: + Add support for xaeniax board + +* Add comment about non-GPL character of standalone applications to + COPYING file + +* Fix FEC ethernet problem on NSCU board. + +* Patch by Gary Jennejohn, 09 Sep 2004: + allow to use USART1 as console port on at91rm9200dk boards + +* Patch by Stefan Roese, 16 Sep 2004: + Update AR405 board. + +* Fix SysClk handling for PPChameleon and CATcenter boards + +* Patch by Detlev Zundel, 08 Sep 2004: + Update etags build target + +* Improve NetConsole support: add support for broadcast destination + address and buffered input. + +* Cleanup compiler warnings for GCC 3.3.x and later + +* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch + +* Add support for IDS "NC650" board + +* Add automatic update support for LWMON board + +* Clear Block Lock-Bits when erasing flash on LWMON board. + +* Fix return code of "fatload" command + +* Enable MSDOS/VFAT filesystem support for LWMON board + +* Patch by Martin Krause, 03 Aug 2004: + change timing for SM501 graphics controller on TQM5200 module + +* Patch by Mark Jonas, 13 July 2004: + - Total5200 LCD now run in little endian mode. Endianess conversion + is done in hardware. + - Removed last reference to "console" environment variable. + +* Patches by Lars Munch, 12 Jul 2004: + - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk + board specific + - split out the LXT971A PHY from ns_9750_eth.h + - split the dm9161 phy part out of at91rm9200_ether.c + +* Patch by Andreas Engel, 12 Jul 2004: + Replaced hardcoded PL011 clock frequency with config variable. + Fixed wrong CONFIG_CMD_DFL doc. + +* Patch by Thomas Viehweger, 09 Jun 2004: + make it possible to remove chpart when there is only one partition + +* Add support for console over UDP (compatible to Ingo Molnar's + netconsole patch under Linux) + +* Patch by Jon Loeliger, 16 Jul 2004: + - support larger DDR memories up to 2G on the PC8540/8560ADS and + STXGP3 boards + - Made MPC8540/8560ADS be 33Mhz PCI by default. + - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 + and CONFIG_L2_INIT_RAM options. + - Refactor Local Bus initialization out of SDRAM setup. + - Re-implement new version of LBC11/DDR11 errata workarounds. + - Moved board specific PCI init parts out of CPU directory. + - Added TLB entry for PCI-1 IO Memory + - Updated README.mpc85xxads + * Patch by Sascha Hauer, 28 Jun: - add generic support for Motorola i.MX architecture - add support for mx1ads, mx1fs2 and scb9328 boards