X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=Makefile;h=84b0c43440d0a55ef5b8db3f6735cd7359301077;hp=db7561c2d802bd5258789013cf435a061e9535f6;hb=18122019972ca639ee3b581257e3a63ff7c8efeb;hpb=785881f775252940185e10fbb2d5299c9ffa6bce

diff --git a/Makefile b/Makefile
index db7561c2d8..84b0c43440 100644
--- a/Makefile
+++ b/Makefile
@@ -46,12 +46,7 @@ HOSTARCH := $(shell uname -m | \
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 	    sed -e 's/\(cygwin\).*/cygwin/')
 
-# Set shell to bash if possible, otherwise fall back to sh
-SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-	else if [ -x /bin/bash ]; then echo /bin/bash; \
-	else echo sh; fi; fi)
-
-export	HOSTARCH HOSTOS SHELL
+export	HOSTARCH HOSTOS
 
 # Deal with colliding definitions from tcsh etc.
 VENDOR=
@@ -273,6 +268,7 @@ LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o
 LIBS-y += drivers/block/libblock.o
 LIBS-$(CONFIG_BOOTCOUNT_LIMIT) += drivers/bootcount/libbootcount.o
+LIBS-y += drivers/crypto/libcrypto.o
 LIBS-y += drivers/dma/libdma.o
 LIBS-y += drivers/fpga/libfpga.o
 LIBS-y += drivers/gpio/libgpio.o
@@ -487,12 +483,19 @@ $(obj)u-boot.dis:	$(obj)u-boot
 
 
 $(obj)u-boot-with-spl.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(or $(CONFIG_SPL_PAD_TO),0) \
-			-O binary $(obj)spl/u-boot-spl \
-			$(obj)spl/u-boot-spl-pad.bin
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SPL_PAD_TO) \
+			-I binary -O binary $< $(obj)spl/u-boot-spl-pad.bin
 		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
 		rm $(obj)spl/u-boot-spl-pad.bin
 
+$(obj)u-boot-with-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+			$(OBJTREE)/u-boot-with-spl.imx
+
+$(obj)u-boot-with-nand-spl.imx: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
+		$(MAKE) -C $(SRCTREE)/arch/arm/imx-common \
+			$(OBJTREE)/u-boot-with-nand-spl.imx
+
 $(obj)u-boot.ubl:       $(obj)u-boot-with-spl.bin
 		$(obj)tools/mkimage -n $(UBL_CONFIG) -T ublimage \
 		-e $(CONFIG_SYS_TEXT_BASE) -d $< $(obj)u-boot.ubl
@@ -782,23 +785,6 @@ $(obj).boards.depend:	boards.cfg
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#########################################################################
-## ARM1176 Systems
-#########################################################################
-smdk6400_noUSB_config	\
-smdk6400_config	:	unconfig
-	@mkdir -p $(obj)include $(obj)board/samsung/smdk6400
-	@mkdir -p $(obj)nand_spl/board/samsung/smdk6400
-	@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-	@if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then			\
-		echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-	else										\
-		echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\
-	fi
-	@$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx
-	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
-
 #########################################################################
 #########################################################################
 
@@ -857,6 +843,8 @@ clobber:	tidy
 	@rm -f $(obj)u-boot.kwb
 	@rm -f $(obj)u-boot.pbl
 	@rm -f $(obj)u-boot.imx
+	@rm -f $(obj)u-boot-with-spl.imx
+	@rm -f $(obj)u-boot-with-nand-spl.imx
 	@rm -f $(obj)u-boot.ubl
 	@rm -f $(obj)u-boot.ais
 	@rm -f $(obj)u-boot.dtb