X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=Makefile;h=92faed63fd1208897078d9dc1c88d8fa65e7fc55;hp=24d96877ac60536e9ac8adbdf6341b1141c96bd7;hb=46eeb1405961f091aac2c7ccef593075c1e4d137;hpb=c71630838d908e410ee83f0164327e1fd515f1ca diff --git a/Makefile b/Makefile index 24d96877ac..92faed63fd 100644 --- a/Makefile +++ b/Makefile @@ -1,14 +1,7 @@ -# -# (C) Copyright 2000-2013 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -VERSION = 2014 -PATCHLEVEL = 07 +VERSION = 2015 +PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc1 NAME = # *DOCUMENTATION* @@ -17,11 +10,9 @@ NAME = # Comments in this file are targeted only to the developer, do not # expect to learn how to build the kernel reading this file. -# Do not: -# o use make's built-in rules and variables -# (this increases performance and avoids hard-to-debug behaviour); -# o print "Entering directory ..."; -MAKEFLAGS += -rR --no-print-directory +# Do not use make's built-in rules and variables +# (this increases performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -rR # Avoid funny character set dependencies unexport LC_ALL @@ -29,6 +20,9 @@ LC_COLLATE=C LC_NUMERIC=C export LC_COLLATE LC_NUMERIC +# Avoid interference with shell env settings +unexport GREP_OPTIONS + # We are using a recursive build, so we need to do a little thinking # to get the ordering right. # @@ -45,6 +39,29 @@ export LC_COLLATE LC_NUMERIC # descending is started. They are now explicitly listed as the # prepare rule. +# Beautify output +# --------------------------------------------------------------------------- +# +# Normally, we echo the whole command before executing it. By making +# that echo $($(quiet)$(cmd)), we now have the possibility to set +# $(quiet) to choose other forms of output instead, e.g. +# +# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ +# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< +# +# If $(quiet) is empty, the whole command will be printed. +# If it is set to "quiet_", only the short version will be printed. +# If it is set to "silent_", nothing will be printed at all, since +# the variable $(silent_cmd_cc_o_c) doesn't exist. +# +# A simple variant is to prefix commands with $(Q) - that's useful +# for commands that shall be hidden in non-verbose mode. +# +# $(Q)ln $@ :< +# +# If KBUILD_VERBOSE equals 0 then the above command will be hidden. +# If KBUILD_VERBOSE equals 1 then the above command is displayed. +# # To put more focus on warnings, be less verbose as default # Use 'make V=1' to see the full commands @@ -55,33 +72,28 @@ ifndef KBUILD_VERBOSE KBUILD_VERBOSE = 0 endif -# Call a source code checker (by default, "sparse") as part of the -# C compilation. -# -# Use 'make C=1' to enable checking of only re-compiled files. -# Use 'make C=2' to enable checking of *all* source files, regardless -# of whether they are re-compiled or not. -# -# See the file "Documentation/sparse.txt" for more details, including -# where to get the "sparse" utility. +ifeq ($(KBUILD_VERBOSE),1) + quiet = + Q = +else + quiet=quiet_ + Q = @ +endif -ifeq ("$(origin C)", "command line") - KBUILD_CHECKSRC = $(C) +# If the user is running make -s (silent mode), suppress echoing of +# commands + +ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 +ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) + quiet=silent_ endif -ifndef KBUILD_CHECKSRC - KBUILD_CHECKSRC = 0 +else # make-3.8x +ifneq ($(filter s% -s%,$(MAKEFLAGS)),) + quiet=silent_ endif - -# Use make M=dir to specify directory of external module to build -# Old syntax make ... SUBDIRS=$PWD is still supported -# Setting the environment variable KBUILD_EXTMOD take precedence -ifdef SUBDIRS - KBUILD_EXTMOD ?= $(SUBDIRS) endif -ifeq ("$(origin M)", "command line") - KBUILD_EXTMOD := $(M) -endif +export quiet Q KBUILD_VERBOSE # kbuild supports saving output files in a separate directory. # To locate output files in a separate directory two syntaxes are supported. @@ -98,7 +110,6 @@ endif # The O= assignment takes precedence over the KBUILD_OUTPUT environment # variable. - # KBUILD_SRC is set on invocation of make in OBJ directory # KBUILD_SRC is not intended to be used by the regular user (for now) ifeq ($(KBUILD_SRC),) @@ -109,10 +120,6 @@ ifeq ("$(origin O)", "command line") KBUILD_OUTPUT := $(O) endif -ifeq ("$(origin W)", "command line") - export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W) -endif - # That's our default target when none is given on the command line PHONY := _all _all: @@ -135,10 +142,8 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make @: sub-make: FORCE - $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ - KBUILD_SRC=$(CURDIR) \ - KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \ - $(filter-out _all sub-make,$(MAKECMDGOALS)) + $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \ + -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS)) # Leave processing to above invocation of make skip-makefile := 1 @@ -148,6 +153,39 @@ endif # ifeq ($(KBUILD_SRC),) # We process the rest of the Makefile if this is the final invocation of make ifeq ($(skip-makefile),) +# Do not print "Entering directory ...", +# but we want to display it when entering to the output directory +# so that IDEs/editors are able to understand relative filenames. +MAKEFLAGS += --no-print-directory + +# Call a source code checker (by default, "sparse") as part of the +# C compilation. +# +# Use 'make C=1' to enable checking of only re-compiled files. +# Use 'make C=2' to enable checking of *all* source files, regardless +# of whether they are re-compiled or not. +# +# See the file "Documentation/sparse.txt" for more details, including +# where to get the "sparse" utility. + +ifeq ("$(origin C)", "command line") + KBUILD_CHECKSRC = $(C) +endif +ifndef KBUILD_CHECKSRC + KBUILD_CHECKSRC = 0 +endif + +# Use make M=dir to specify directory of external module to build +# Old syntax make ... SUBDIRS=$PWD is still supported +# Setting the environment variable KBUILD_EXTMOD take precedence +ifdef SUBDIRS + KBUILD_EXTMOD ?= $(SUBDIRS) +endif + +ifeq ("$(origin M)", "command line") + KBUILD_EXTMOD := $(M) +endif + # If building an external module we do not care about the all: rule # but instead _all depend on modules PHONY += all @@ -157,8 +195,18 @@ else _all: modules endif -srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR)) -objtree := $(CURDIR) +ifeq ($(KBUILD_SRC),) + # building in the source tree + srctree := . +else + ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR))) + # building in a subdirectory of the source tree + srctree := .. + else + srctree := $(KBUILD_SRC) + endif +endif +objtree := . src := $(srctree) obj := $(objtree) @@ -166,9 +214,6 @@ VPATH := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD)) export srctree objtree VPATH -MKCONFIG := $(srctree)/mkconfig -export MKCONFIG - # Make sure CDPATH settings don't interfere unexport CDPATH @@ -189,9 +234,6 @@ HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ export HOSTARCH HOSTOS -# Deal with colliding definitions from tcsh etc. -VENDOR= - ######################################################################### # set default to nothing for native builds @@ -199,13 +241,16 @@ ifeq ($(HOSTARCH),$(ARCH)) CROSS_COMPILE ?= endif +KCONFIG_CONFIG ?= .config +export KCONFIG_CONFIG + # SHELL used by kbuild CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ else if [ -x /bin/bash ]; then echo /bin/bash; \ else echo sh; fi ; fi) -HOSTCC = gcc -HOSTCXX = g++ +HOSTCC = cc +HOSTCXX = c++ HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer HOSTCXXFLAGS = -O2 @@ -244,18 +289,18 @@ endif KBUILD_MODULES := KBUILD_BUILTIN := 1 -# If we have only "make modules", don't compile built-in objects. -# When we're building modules with modversions, we need to consider -# the built-in objects during the descend as well, in order to -# make sure the checksums are up to date before we record them. +# If we have only "make modules", don't compile built-in objects. +# When we're building modules with modversions, we need to consider +# the built-in objects during the descend as well, in order to +# make sure the checksums are up to date before we record them. ifeq ($(MAKECMDGOALS),modules) KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1) endif -# If we have "make modules", compile modules -# in addition to whatever we do anyway. -# Just "make" or "make all" shall build modules as well +# If we have "make modules", compile modules +# in addition to whatever we do anyway. +# Just "make" or "make all" shall build modules as well # U-Boot does not need modules #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),) @@ -269,52 +314,6 @@ endif export KBUILD_MODULES KBUILD_BUILTIN export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD -# Beautify output -# --------------------------------------------------------------------------- -# -# Normally, we echo the whole command before executing it. By making -# that echo $($(quiet)$(cmd)), we now have the possibility to set -# $(quiet) to choose other forms of output instead, e.g. -# -# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@ -# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< -# -# If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. -# If it is set to "silent_", nothing will be printed at all, since -# the variable $(silent_cmd_cc_o_c) doesn't exist. -# -# A simple variant is to prefix commands with $(Q) - that's useful -# for commands that shall be hidden in non-verbose mode. -# -# $(Q)ln $@ :< -# -# If KBUILD_VERBOSE equals 0 then the above command will be hidden. -# If KBUILD_VERBOSE equals 1 then the above command is displayed. - -ifeq ($(KBUILD_VERBOSE),1) - quiet = - Q = -else - quiet=quiet_ - Q = @ -endif - -# If the user is running make -s (silent mode), suppress echoing of -# commands - -ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4 -ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),) - quiet=silent_ -endif -else # make-3.8x -ifneq ($(filter s% -s%,$(MAKEFLAGS)),) - quiet=silent_ -endif -endif - -export quiet Q KBUILD_VERBOSE - # Look for make include files relative to root of kernel src MAKEFLAGS += --include-dir=$(srctree) @@ -341,13 +340,14 @@ OBJCOPY = $(CROSS_COMPILE)objcopy OBJDUMP = $(CROSS_COMPILE)objdump AWK = awk PERL = perl +PYTHON = python DTC = dtc CHECK = sparse CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF) -KBUILD_CPPFLAGS := -D__KERNEL__ +KBUILD_CPPFLAGS := -D__KERNEL__ -D__UBOOT__ KBUILD_CFLAGS := -Wall -Wstrict-prototypes \ -Wno-format-security \ @@ -362,7 +362,7 @@ export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC export CPP AR NM LDR STRIP OBJCOPY OBJDUMP -export MAKE AWK PERL +export MAKE AWK PERL PYTHON export HOSTCXX HOSTCXXFLAGS DTC CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS @@ -417,7 +417,7 @@ timestamp_h := include/generated/timestamp_autogenerated.h no-dot-config-targets := clean clobber mrproper distclean \ help %docs check% coccicheck \ - ubootversion backup tools-only + ubootversion backup config-targets := 0 mixed-targets := 0 @@ -443,12 +443,12 @@ ifeq ($(mixed-targets),1) # We're called with mixed targets (*config and build targets). # Handle them one by one. -PHONY += $(MAKECMDGOALS) build-one-by-one +PHONY += $(MAKECMDGOALS) __build_one_by_one -$(MAKECMDGOALS): build-one-by-one +$(filter-out __build_one_by_one, $(MAKECMDGOALS)): __build_one_by_one @: -build-one-by-one: +__build_one_by_one: $(Q)set -e; \ for i in $(MAKECMDGOALS); do \ $(MAKE) -f $(srctree)/Makefile $$i; \ @@ -460,31 +460,50 @@ ifeq ($(config-targets),1) # *config targets only - make sure prerequisites are updated, and descend # in scripts/kconfig to make the *config target -# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed. -# KBUILD_DEFCONFIG may point out an alternative default configuration -# used for 'make defconfig' +KBUILD_DEFCONFIG := sandbox_defconfig +export KBUILD_DEFCONFIG KBUILD_KCONFIG + +config: scripts_basic outputmakefile FORCE + +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ -%_config:: outputmakefile - @$(MKCONFIG) -A $(@:_config=) +%config: scripts_basic outputmakefile FORCE + +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ else # =========================================================================== # Build targets only - this includes vmlinux, arch specific targets, clean # targets and others. In general all targets except *config targets. -# load ARCH, BOARD, and CPU configuration --include include/config.mk - ifeq ($(dot-config),1) # Read in config +-include include/config/auto.conf + +# Read in dependencies to all Kconfig* files, make sure to run +# oldconfig if changes are detected. +-include include/config/auto.conf.cmd + +# To avoid any implicit rule to kick in, define an empty command +$(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; + +# If .config is newer than include/config/auto.conf, someone tinkered +# with it and forgot to run make oldconfig. +# if auto.conf.cmd is missing then we are probably in a cleaned tree so +# we execute the config step to be sure to catch updated Kconfig files +include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd + $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig + -include include/autoconf.mk -include include/autoconf.mk.dep -# load other configuration +# We want to include arch/$(ARCH)/config.mk only when include/config/auto.conf +# is up-to-date. When we switch to a different board configuration, old CONFIG +# macros are still remaining in include/config/auto.conf. Without the following +# gimmick, wrong config.mk would be included leading nasty warnings/errors. +autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \ + -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG))) +ifneq ($(autoconf_is_current),) include $(srctree)/config.mk - -ifeq ($(wildcard include/config.mk),) -$(error "System not configured - see README") +include $(srctree)/arch/$(ARCH)/Makefile endif # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use @@ -513,11 +532,15 @@ ifndef LDSCRIPT endif else - - +# Dummy target needed, because used as prerequisite +include/config/auto.conf: ; endif # $(dot-config) -KBUILD_CFLAGS += -Os #-fomit-frame-pointer +ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE +KBUILD_CFLAGS += -Os +else +KBUILD_CFLAGS += -O2 +endif ifdef BUILD_TAG KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"' @@ -553,6 +576,8 @@ endif export CONFIG_SYS_TEXT_BASE +include $(srctree)/scripts/Makefile.extrawarn + # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments KBUILD_CPPFLAGS += $(KCPPFLAGS) KBUILD_AFLAGS += $(KAFLAGS) @@ -563,7 +588,8 @@ KBUILD_CFLAGS += $(KCFLAGS) UBOOTINCLUDE := \ -Iinclude \ $(if $(KBUILD_SRC), -I$(srctree)/include) \ - -I$(srctree)/arch/$(ARCH)/include + -I$(srctree)/arch/$(ARCH)/include \ + -include $(srctree)/include/linux/kconfig.h NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include) CHECKFLAGS += $(NOSTDINC_FLAGS) @@ -576,29 +602,18 @@ c_flags := $(KBUILD_CFLAGS) $(cpp_flags) ######################################################################### # U-Boot objects....order is important (i.e. start must be first) -head-y := $(CPUDIR)/start.o -head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o -head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o - HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n) libs-y += lib/ libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ -libs-y += $(CPUDIR)/ -ifdef SOC -libs-y += $(CPUDIR)/$(SOC)/ -endif libs-$(CONFIG_OF_EMBED) += dts/ -libs-y += arch/$(ARCH)/lib/ libs-y += fs/ libs-y += net/ libs-y += disk/ libs-y += drivers/ -libs-$(CONFIG_DM) += drivers/core/ libs-y += drivers/dma/ libs-y += drivers/gpio/ libs-y += drivers/i2c/ -libs-y += drivers/input/ libs-y += drivers/mmc/ libs-y += drivers/mtd/ libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ @@ -625,19 +640,10 @@ libs-y += drivers/usb/musb-new/ libs-y += drivers/usb/phy/ libs-y += drivers/usb/ulpi/ libs-y += common/ -libs-y += lib/libfdt/ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ libs-y += test/dm/ -libs-$(CONFIG_DM_DEMO) += drivers/demo/ - -ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) -libs-y += arch/$(ARCH)/imx-common/ -endif - -libs-$(CONFIG_ARM) += arch/arm/cpu/ -libs-$(CONFIG_PPC) += arch/powerpc/cpu/ libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) @@ -654,13 +660,9 @@ u-boot-main := $(libs-y) # Add GCC lib -ifdef CONFIG_USE_PRIVATE_LIBGCC ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y) PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a else -PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc -endif -else PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc endif PLATFORM_LIBS += $(PLATFORM_LIBGCC) @@ -727,6 +729,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%) endif ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf +# We can't do this yet due to the need for binary blobs +# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom + # enable combined SPL/u-boot/dtb rules for tegra ifneq ($(CONFIG_TEGRA),) ifeq ($(CONFIG_SPL),y) @@ -738,6 +743,11 @@ endif endif endif +# Add optional build target if defined in board/cpu/soc headers +ifneq ($(CONFIG_BUILD_TARGET),) +ALL-y += $(CONFIG_BUILD_TARGET:"%"=%) +endif + LDFLAGS_u-boot += $(LDFLAGS_FINAL) ifneq ($(CONFIG_SYS_TEXT_BASE),) LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE) @@ -759,6 +769,20 @@ quiet_cmd_pad_cat = CAT $@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@ all: $(ALL-y) +ifneq ($(CONFIG_SYS_GENERIC_BOARD),y) + @echo "===================== WARNING ======================" + @echo "Please convert this board to generic board." + @echo "Otherwise it will be removed by the end of 2014." + @echo "See doc/README.generic-board for further information" + @echo "====================================================" +endif +ifeq ($(CONFIG_DM_I2C_COMPAT),y) + @echo "===================== WARNING ======================" + @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove" + @echo "(possibly in a subsequent patch in your series)" + @echo "before sending patches to the mailing list." + @echo "====================================================" +endif PHONY += dtbs dtbs dts/dt.dtb: checkdtc u-boot @@ -783,15 +807,18 @@ OBJCOPYFLAGS_u-boot.srec := -O srec u-boot.hex u-boot.srec: u-boot FORCE $(call if_changed,objcopy) -OBJCOPYFLAGS_u-boot.bin := -O binary +OBJCOPYFLAGS_u-boot.bin := -O binary \ + $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec) -binary_size_check: u-boot.bin System.map FORCE - @file_size=`stat -c %s u-boot.bin` ; \ - map_size=$(shell cat System.map | \ - awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print strtonum("0x" end) - strtonum("0x" start)}'); \ +binary_size_check: u-boot.bin FORCE + @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \ + map_size=$(shell cat u-boot.map | \ + awk '/_image_copy_start/ {start = $$1} /_image_binary_end/ {end = $$1} END {if (start != "" && end != "") print "ibase=16; " toupper(end) " - " toupper(start)}' \ + | sed 's/0X//g' \ + | bc); \ if [ "" != "$$map_size" ]; then \ if test $$map_size -ne $$file_size; then \ - echo "System.map shows a binary size of $$map_size" >&2 ; \ + echo "u-boot.map shows a binary size of $$map_size" >&2 ; \ echo " but u-boot.bin shows $$file_size" >&2 ; \ exit 1; \ fi \ @@ -804,7 +831,7 @@ u-boot.bin: u-boot FORCE u-boot.ldr: u-boot $(CREATE_LDR_ENV) - $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) + $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS) $(BOARD_SIZE_CHECK) OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex @@ -832,7 +859,7 @@ MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \ MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage -u-boot.img u-boot.kwb u-boot.pbl: u-boot$(if $(CONFIG_OF_SEPARATE),-dtb,).bin FORCE +u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE $(call if_changed,mkimage) MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img) @@ -914,10 +941,66 @@ OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE $(call if_changed,pad_cat) +MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \ + -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot +u-boot-nand.gph: u-boot.bin FORCE + $(call if_changed,mkimage) + @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@ + +# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including +# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in +# the middle. +ifneq ($(CONFIG_X86_RESET_VECTOR),) +rom: u-boot.rom FORCE + +IFDTOOL=$(objtree)/tools/ifdtool +IFDTOOL_FLAGS = -f 0:$(objtree)/u-boot.dtb +IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1) +IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin +IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin + +ifneq ($(CONFIG_HAVE_INTEL_ME),) +IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin +IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin +endif + +ifneq ($(CONFIG_HAVE_MRC),) +IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin +endif + +ifneq ($(CONFIG_HAVE_FSP),) +IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE) +endif + +ifneq ($(CONFIG_HAVE_CMC),) +IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE) +endif + +ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),) +IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE) +endif + +quiet_cmd_ifdtool = IFDTOOL $@ +cmd_ifdtool = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp; +ifneq ($(CONFIG_HAVE_INTEL_ME),) +cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp; +endif +cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp; +cmd_ifdtool += mv u-boot.tmp $@ + +u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin + $(call if_changed,ifdtool) + +OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec +u-boot-x86-16bit.bin: u-boot FORCE + $(call if_changed,objcopy) +endif + ifneq ($(CONFIG_SUNXI),) OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff -u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE +u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin \ + u-boot$(if $(CONFIG_OF_CONTROL),-dtb,).img FORCE $(call if_changed,pad_cat) endif @@ -939,15 +1022,22 @@ u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE #concatenated with u-boot binary. It is need by PowerPC SoC having #internal SRAM <= 512KB. MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ - -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage + -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage \ + -A $(ARCH) -a $(CONFIG_SPL_TEXT_BASE) spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) +ifeq ($(ARCH),arm) +UBOOT_BINLOAD := u-boot.img +else +UBOOT_BINLOAD := u-boot.bin +endif + OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ --gap-fill=0xff -u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl u-boot.bin FORCE +u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE $(call if_changed,pad_cat) # PPC4xx needs the SPL at the end of the image, since the reset vector @@ -981,13 +1071,17 @@ quiet_cmd_u-boot__ ?= LD $@ --start-group $(u-boot-main) --end-group \ $(PLATFORM_LIBS) -Map u-boot.map -u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds - $(call if_changed,u-boot__) -ifeq ($(CONFIG_KALLSYMS),y) +quiet_cmd_smap = GEN common/system_map.o +cmd_smap = \ smap=`$(call SYSTEM_MAP,u-boot) | \ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \ -c $(srctree)/common/system_map.c -o common/system_map.o + +u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds + $(call if_changed,u-boot__) +ifeq ($(CONFIG_KALLSYMS),y) + $(call cmd,smap) $(call cmd,u-boot__) common/system_map.o endif @@ -1017,7 +1111,7 @@ define filechk_uboot.release endef # Store (new) UBOOTRELEASE string in include/config/uboot.release -include/config/uboot.release: Makefile FORCE +include/config/uboot.release: include/config/auto.conf FORCE $(call filechk,uboot.release) @@ -1035,8 +1129,8 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3 # 1) Check that make has not been executed in the kernel src $(srctree) prepare3: include/config/uboot.release ifneq ($(KBUILD_SRC),) - @$(kecho) ' Using $(srctree) as source for u-boot' - $(Q)if [ -f $(srctree)/include/config.mk ]; then \ + @$(kecho) ' Using $(srctree) as source for U-Boot' + $(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \ echo >&2 " $(srctree) is not clean, please run 'make mrproper'"; \ echo >&2 " in the '$(srctree)' directory.";\ /bin/false; \ @@ -1046,7 +1140,8 @@ endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile -prepare1: prepare2 $(version_h) $(timestamp_h) +prepare1: prepare2 $(version_h) $(timestamp_h) \ + include/config/auto.conf ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) @echo >&2 " Your architecture does not support generic board." @@ -1088,29 +1183,6 @@ $(version_h): include/config/uboot.release FORCE $(timestamp_h): $(srctree)/Makefile FORCE $(call filechk,timestamp.h) -# -# Auto-generate the autoconf.mk file (which is included by all makefiles) -# -# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. -# the dep file is only include in this top level makefile to determine when -# to regenerate the autoconf.mk file. - -quiet_cmd_autoconf_dep = GEN $@ - cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \ - -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@ - -include/autoconf.mk.dep: include/config.h include/common.h - $(call cmd,autoconf_dep) - -quiet_cmd_autoconf = GEN $@ - cmd_autoconf = \ - $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \ - sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \ - rm $@.tmp - -include/autoconf.mk: include/config.h - $(call cmd,autoconf) - # --------------------------------------------------------------------------- PHONY += depend dep @@ -1134,9 +1206,9 @@ spl/sunxi-spl.bin: spl/u-boot-spl @: tpl/u-boot-tpl.bin: tools prepare - $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all CONFIG_TPL_BUILD=y + $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all -TAG_SUBDIRS := $(u-boot-dirs) include +TAG_SUBDIRS := $(patsubst %,$(srctree)/%,$(u-boot-dirs) include) FIND := find FINDFLAGS := -L @@ -1146,7 +1218,7 @@ tags ctags: -name '*.[chS]' -print` etags: - etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ + etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \ -name '*.[chS]' -print` cscope: $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \ @@ -1208,21 +1280,18 @@ include/license.h: tools/bin2header COPYING # make distclean Remove editor backup files, patch leftover files and the like # Directories & files removed with 'make clean' -CLEAN_DIRS += $(MODVERDIR) -CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \ - include/autoconf.mk* include/spl-autoconf.mk \ - include/tpl-autoconf.mk +CLEAN_DIRS += $(MODVERDIR) \ + $(foreach d, spl tpl, $(patsubst %,$d/%, \ + $(filter-out include, $(shell ls -1 $d 2>/dev/null)))) -# Directories & files removed with 'make clobber' -CLOBBER_DIRS += spl tpl -CLOBBER_FILES += u-boot* MLO* SPL System.map +CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \ + boot* u-boot* MLO* SPL System.map # Directories & files removed with 'make mrproper' -MRPROPER_DIRS += include/config include/generated \ - .tmp_objdiff -MRPROPER_FILES += .config .config.old \ - tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ - include/config.h include/config.mk +MRPROPER_DIRS += include/config include/generated spl tpl \ + .tmp_objdiff +MRPROPER_FILES += .config .config.old include/autoconf.mk* include/config.h \ + ctags etags TAGS cscope* GPATH GTAGS GRTAGS GSYMS # clean - Delete most, but leave enough to build external modules # @@ -1249,17 +1318,6 @@ clean: $(clean-dirs) -o -name modules.builtin -o -name '.tmp_*.o.*' \ -o -name '*.gcno' \) -type f -print | xargs rm -f -# clobber -# -clobber: rm-dirs := $(CLOBBER_DIRS) -clobber: rm-files := $(CLOBBER_FILES) - -PHONY += clobber - -clobber: clean - $(call cmd,rmdirs) - $(call cmd,rmfiles) - # mrproper - Delete all generated files, including .config # mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS)) @@ -1270,10 +1328,10 @@ PHONY += $(mrproper-dirs) mrproper archmrproper $(mrproper-dirs): $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@) -mrproper: clobber $(mrproper-dirs) +mrproper: clean $(mrproper-dirs) $(call cmd,rmdirs) $(call cmd,rmfiles) - @rm -f arch/*/include/asm/arch arch/*/include/asm/proc + @rm -f arch/*/include/asm/arch # distclean # @@ -1286,6 +1344,7 @@ distclean: mrproper -o -name '.*.rej' -o -name '*%' -o -name 'core' \ -o -name '*.pyc' \) \ -type f -print | xargs rm -f + @rm -f boards.cfg backup: F=`basename $(srctree)` ; cd .. ; \ @@ -1293,27 +1352,25 @@ backup: help: @echo 'Cleaning targets:' - @echo ' clean - Remove most generated files but keep the config and' - @echo ' necessities for testing u-boot' - @echo ' clobber - Remove most generated files but keep the config' + @echo ' clean - Remove most generated files but keep the config' @echo ' mrproper - Remove all generated files + config + various backup files' @echo ' distclean - mrproper + remove editor backup and patch files' @echo '' -# uncomment after adding Kconfig feature -# @echo 'Configuration targets:' -# @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help -# @echo '' + @echo 'Configuration targets:' + @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help + @echo '' @echo 'Other generic targets:' @echo ' all - Build all necessary images depending on configuration' - @echo ' u-boot - Build the bare u-boot' + @echo '* u-boot - Build the bare u-boot' @echo ' dir/ - Build all files in dir and below' @echo ' dir/file.[oisS] - Build specified target only' @echo ' dir/file.lst - Build specified mixed source/assembly target only' @echo ' (requires a recent binutils and recent build (System.map))' - @echo ' tags/TAGS - Generate tags file for editors' + @echo ' tags/ctags - Generate ctags file for editors' + @echo ' etags - Generate etags file for editors' @echo ' cscope - Generate cscope index' - @echo ' ubootrelease - Output the release version string' - @echo ' ubootversion - Output the version stored in Makefile' + @echo ' ubootrelease - Output the release version string (use with make -s)' + @echo ' ubootversion - Output the version stored in Makefile (use with make -s)' @echo '' @echo 'Static analysers' @echo ' checkstack - Generate a list of stack hogs' @@ -1434,7 +1491,7 @@ endif # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Usage: # $(Q)$(MAKE) $(clean)=dir -clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj +clean := -f $(srctree)/scripts/Makefile.clean obj endif # skip-makefile