X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fdlvision-10g.h;h=e6bfe58e98dfbf2755fd685c075c01dd445bc764;hp=31fc65d19696af3442174efec615c958c88318a9;hb=92aae64ec72b73346e4cdd978b3d4178afe77bfc;hpb=f763be224fa78893384416734419d8e052c1c5ef

diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 31fc65d196..e6bfe58e98 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -17,19 +17,18 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		dlvsion-10g
-#define CONFIG_IDENT_STRING	" dlvision-10g 0.05"
+#define CONFIG_IDENT_STRING	" dlvision-10g 0.06"
 #include "amcc-common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
+#define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */
 
 #undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR " "
 
 /*
  * Configure PLL
@@ -40,6 +39,7 @@
 /* new uImage format support */
 #define CONFIG_FIT
 #define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -64,9 +64,13 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DTT
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DIAG
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_ELF
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_IRQ
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -97,9 +101,23 @@
 /*
  * I2C stuff
  */
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1		0x7F
+
+#define CONFIG_SYS_SPD_BUS_NUM		2
 
 /* Temp sensor/hwmon/dtt */
+#define CONFIG_SYS_DTT_BUS_NUM	2
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
 #define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e, 0x18 } /* Sensor addresses */
 #define CONFIG_DTT_PWM_LOOKUPTABLE	\
@@ -107,6 +125,9 @@
 		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
+#define CONFIG_SYS_ICS8N3QV01_I2C	{0, 1}
+#define CONFIG_SYS_SIL1178_I2C		{0, 1}
+
 /* EBC peripherals */
 
 #define CONFIG_SYS_FLASH_BASE		0xFC000000
@@ -217,9 +238,8 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
 #define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -307,9 +327,7 @@
 /*
  * OSD Setup
  */
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_SIL1178
 #define CONFIG_SYS_OSD_SCREENS		CONFIG_SYS_FPGA_COUNT
 
 #endif	/* __CONFIG_H */