X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fmx31ads.h;h=9d9f4a782290918430c3b865adf240418d5edfef;hp=9ede7645d9e1230d97cdf99caa35c8fe68b39e02;hb=495dbd72dd1172de866ba323263a5b62cf454972;hpb=ce0eb70333331da6942167c41e6841c8c7994a33 diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 9ede7645d9..9d9f4a7822 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -22,17 +22,19 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include +#include /* High Level Configuration Options */ #define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ #define CONFIG_MX31 1 /* in a mx31 */ -#define CONFIG_MX31_HCLK_FREQ 26000000 /* RedBoot says 26MHz */ -#define CONFIG_MX31_CLK32 32768 #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO +#define CONFIG_SYS_TEXT_BASE 0xA0000000 + +#define CONFIG_MACH_TYPE MACH_TYPE_MX31ADS + /* * Disabled for now due to build problems under Debian and a significant increase * in the final file size: 144260 vs. 109536 Bytes. @@ -50,28 +52,36 @@ /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) /* * Hardware drivers */ -#define CONFIG_MX31_UART 1 -#define CFG_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 #define CONFIG_DEFAULT_SPI_BUS 1 -#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_2 | SPI_CS_HIGH) - -#define CONFIG_RTC_MC13783 1 +#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_MXC_GPIO + +/* PMIC Controller */ +#define CONFIG_PMIC +#define CONFIG_PMIC_SPI +#define CONFIG_PMIC_FSL +#define CONFIG_FSL_PMIC_BUS 1 +#define CONFIG_FSL_PMIC_CS 0 +#define CONFIG_FSL_PMIC_CLK 1000000 +#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH) +#define CONFIG_FSL_PMIC_BITLEN 32 +#define CONFIG_RTC_MC13XXX /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 -#define CFG_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} /*********************************************************** * Command definition @@ -106,9 +116,9 @@ "cp.b ${loadaddr} ${uboot_addr} ${filesize}; " \ "setenv filesize; saveenv\0" -#define CONFIG_DRIVER_CS8900 1 -#define CS8900_BASE 0xb4020300 -#define CS8900_BUS16 1 /* follow the Linux driver */ +#define CONFIG_CS8900 +#define CONFIG_CS8900_BASE 0xb4020300 +#define CONFIG_CS8900_BUS16 1 /* follow the Linux driver */ /* * The MX31ADS board seems to have a hardware "peculiarity" confirmed under @@ -125,75 +135,71 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ /* Print Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_MEMTEST_START 0 /* memtest works on */ -#define CFG_MEMTEST_END 0x10000 +#define CONFIG_SYS_MEMTEST_START 0 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x10000 -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR -#define CFG_LOAD_ADDR CONFIG_LOADADDR - -#define CFG_HZ CONFIG_MX31_CLK32 /* use 32kHz clock as source */ +#define CONFIG_SYS_HZ 1000 #define CONFIG_CMDLINE_EDITING 1 -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ - /*----------------------------------------------------------------------- * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 CSD0_BASE #define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024) +#define CONFIG_BOARD_EARLY_INIT_F + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ + CONFIG_SYS_GBL_DATA_OFFSET) /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_FLASH_BASE CS0_BASE -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ -#define CFG_MONITOR_BASE CFG_FLASH_BASE /* Monitor at beginning of flash */ -#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 262 /* max number of sectors on one chip */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256KiB */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_SECT_SIZE (32 * 1024) -#define CFG_ENV_SIZE CFG_ENV_SECT_SIZE +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE (128 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) /* Address and size of Redundant Environment Sector */ -#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET + CFG_ENV_SIZE) -#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -/* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end. - * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors, - * if we put environment next to it, we will have to occupy 128KiB for it. - * Putting it at the top of flash we use only 32KiB. */ -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_ENV_SECT_SIZE) /*----------------------------------------------------------------------- * CFI FLASH driver setup */ -#define CFG_FLASH_CFI 1 /* Flash memory is CFI compliant */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */ #define CONFIG_FLASH_SPANSION_S29WS_N 1 /* A non-standard buffered write algorithm */ -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ -#define CFG_FLASH_PROTECTION 1 /* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */ /* * JFFS2 partitions */ -#undef CONFIG_JFFS2_CMDLINE +#undef CONFIG_CMD_MTDPARTS #define CONFIG_JFFS2_DEV "nor0" #endif /* __CONFIG_H */