X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Fconfigs%2Fzynq-common.h;h=98bebd02f1d2f747eb5a10b41b1a48684a3f22d7;hp=864528a5ea1b39e8b39e089b45837812bc731a82;hb=36e4076eebf9a6ecae8f99d09a47b7c92a008c2d;hpb=358b8bc204f365be28fed94f23e53e04183a8c7f

diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h
index 864528a5ea..98bebd02f1 100644
--- a/include/configs/zynq-common.h
+++ b/include/configs/zynq-common.h
@@ -25,6 +25,11 @@
 # define CONFIG_SYS_PL310_BASE		0xf8f02000
 #endif
 
+#define ZYNQ_SCUTIMER_BASEADDR		0xF8F00600
+#define CONFIG_SYS_TIMERBASE		ZYNQ_SCUTIMER_BASEADDR
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+#define CONFIG_SYS_TIMER_COUNTER	(CONFIG_SYS_TIMERBASE + 0x4)
+
 /* Serial drivers */
 #define CONFIG_BAUDRATE		115200
 /* The following table includes the supported baudrates */
@@ -34,14 +39,15 @@
 /* DCC driver */
 #if defined(CONFIG_ZYNQ_DCC)
 # define CONFIG_ARM_DCC
-# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
 #else
 # define CONFIG_ZYNQ_SERIAL
 #endif
 
+#define CONFIG_ZYNQ_GPIO
+#define CONFIG_CMD_GPIO
+
 /* Ethernet driver */
 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
-# define CONFIG_NET_MULTI
 # define CONFIG_ZYNQ_GEM
 # define CONFIG_MII
 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
@@ -62,7 +68,6 @@
 
 /* SPI */
 #ifdef CONFIG_ZYNQ_SPI
-# define CONFIG_SPI_FLASH
 # define CONFIG_SPI_FLASH_SST
 # define CONFIG_CMD_SF
 #endif
@@ -105,10 +110,10 @@
 # define CONFIG_CI_UDC           /* ChipIdea CI13xxx UDC */
 # define CONFIG_USB_GADGET
 # define CONFIG_USB_GADGET_DUALSPEED
-# define CONFIG_USBDOWNLOAD_GADGET
+# define CONFIG_USB_GADGET_DOWNLOAD
 # define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x600000
 # define DFU_DEFAULT_POLL_TIMEOUT	300
-# define CONFIG_DFU_FUNCTION
+# define CONFIG_USB_FUNCTION_DFU
 # define CONFIG_DFU_RAM
 # define CONFIG_USB_GADGET_VBUS_DRAW	2
 # define CONFIG_G_DNL_VENDOR_NUM	0x03FD
@@ -118,7 +123,7 @@
 # define CONFIG_USB_CABLE_CHECK
 # define CONFIG_CMD_DFU
 # define CONFIG_CMD_THOR_DOWNLOAD
-# define CONFIG_THOR_FUNCTION
+# define CONFIG_USB_FUNCTION_THOR
 # define DFU_ALT_INFO_RAM \
 	"dfu_ram_info=" \
 	"set dfu_alt_info " \
@@ -198,7 +203,6 @@
 
 # define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
 # define CONFIG_ENV_OFFSET		0xE0000
-# define CONFIG_CMD_SAVEENV
 #endif
 
 /* Default environment */
@@ -255,7 +259,7 @@
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)
 
-#define CONFIG_SYS_MALLOC_LEN		0xC00000
+#define CONFIG_SYS_MALLOC_LEN		0x1400000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
@@ -266,7 +270,6 @@
 #define CONFIG_FPGA
 #define CONFIG_FPGA_XILINX
 #define CONFIG_FPGA_ZYNQPL
-#define CONFIG_CMD_FPGA
 #define CONFIG_CMD_FPGA_LOADMK
 #define CONFIG_CMD_FPGA_LOADP
 #define CONFIG_CMD_FPGA_LOADBP
@@ -291,11 +294,9 @@
 # define CONFIG_SYS_MMC_MAX_DEVICE	1
 #endif
 
-#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"
+#define CONFIG_SYS_LDSCRIPT  "arch/arm/mach-zynq/u-boot.lds"
 
 /* Commands */
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_MII
@@ -309,7 +310,7 @@
 #define CONFIG_SPL_SERIAL_SUPPORT
 #define CONFIG_SPL_BOARD_INIT
 
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/armv7/zynq/u-boot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT	"arch/arm/mach-zynq/u-boot-spl.lds"
 
 /* MMC support */
 #ifdef CONFIG_ZYNQ_SDHCI0