X-Git-Url: https://git.kernelconcepts.de/?p=karo-tx-uboot.git;a=blobdiff_plain;f=include%2Frtc.h;h=bd8621d60b93d4491d33ee477ccd04b7438c65a7;hp=772a54884197d47b55af5dddc0374d94d43dcc39;hb=5121b8df014a80499a0d683f668804178daf0bac;hpb=885fc78c28fbe773bcb4edc9dd0fdac05ebb5b38 diff --git a/include/rtc.h b/include/rtc.h index 772a548841..bd8621d60b 100644 --- a/include/rtc.h +++ b/include/rtc.h @@ -2,23 +2,7 @@ * (C) Copyright 2001 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA + * SPDX-License-Identifier: GPL-2.0+ */ /* @@ -31,39 +15,217 @@ * it there instead of in evey single driver */ #include +#include -/* - * The struct used to pass data from the generic interface code to - * the hardware dependend low-level code ande vice versa. Identical - * to struct rtc_time used by the Linux kernel. - * - * Note that there are small but significant differences to the - * common "struct time": - * - * struct time: struct rtc_time: - * tm_mon 0 ... 11 1 ... 12 - * tm_year years since 1900 years since 0 - */ - -struct rtc_time { - int tm_sec; - int tm_min; - int tm_hour; - int tm_mday; - int tm_mon; - int tm_year; - int tm_wday; - int tm_yday; - int tm_isdst; +#ifdef CONFIG_DM_RTC + +struct rtc_ops { + /** + * get() - get the current time + * + * Returns the current time read from the RTC device. The driver + * is responsible for setting up every field in the structure. + * + * @dev: Device to read from + * @time: Place to put the time that is read + */ + int (*get)(struct udevice *dev, struct rtc_time *time); + + /** + * set() - set the current time + * + * Sets the time in the RTC device. The driver can expect every + * field to be set correctly. + * + * @dev: Device to read from + * @time: Time to write + */ + int (*set)(struct udevice *dev, const struct rtc_time *time); + + /** + * reset() - reset the RTC to a known-good state + * + * This function resets the RTC to a known-good state. The time may + * be unset by this method, so should be set after this method is + * called. + * + * @dev: Device to read from + * @return 0 if OK, -ve on error + */ + int (*reset)(struct udevice *dev); + + /** + * read8() - Read an 8-bit register + * + * @dev: Device to read from + * @reg: Register to read + * @return value read, or -ve on error + */ + int (*read8)(struct udevice *dev, unsigned int reg); + + /** + * write8() - Write an 8-bit register + * + * @dev: Device to write to + * @reg: Register to write + * @value: Value to write + * @return 0 if OK, -ve on error + */ + int (*write8)(struct udevice *dev, unsigned int reg, int val); }; +/* Access the operations for an RTC device */ +#define rtc_get_ops(dev) ((struct rtc_ops *)(dev)->driver->ops) + +/** + * dm_rtc_get() - Read the time from an RTC + * + * @dev: Device to read from + * @time: Place to put the current time + * @return 0 if OK, -ve on error + */ +int dm_rtc_get(struct udevice *dev, struct rtc_time *time); + +/** + * dm_rtc_put() - Write a time to an RTC + * + * @dev: Device to read from + * @time: Time to write into the RTC + * @return 0 if OK, -ve on error + */ +int dm_rtc_set(struct udevice *dev, struct rtc_time *time); + +/** + * dm_rtc_reset() - reset the RTC to a known-good state + * + * If the RTC appears to be broken (e.g. it is not counting up in seconds) + * it may need to be reset to a known good state. This function achieves this. + * After resetting the RTC the time should then be set to a known value by + * the caller. + * + * @dev: Device to read from + * @return 0 if OK, -ve on error + */ +int dm_rtc_reset(struct udevice *dev); + +/** + * rtc_read8() - Read an 8-bit register + * + * @dev: Device to read from + * @reg: Register to read + * @return value read, or -ve on error + */ +int rtc_read8(struct udevice *dev, unsigned int reg); + +/** + * rtc_write8() - Write an 8-bit register + * + * @dev: Device to write to + * @reg: Register to write + * @value: Value to write + * @return 0 if OK, -ve on error + */ +int rtc_write8(struct udevice *dev, unsigned int reg, int val); + +/** + * rtc_read32() - Read a 32-bit value from the RTC + * + * @dev: Device to read from + * @reg: Offset to start reading from + * @valuep: Place to put the value that is read + * @return 0 if OK, -ve on error + */ +int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep); + +/** + * rtc_write32() - Write a 32-bit value to the RTC + * + * @dev: Device to write to + * @reg: Register to start writing to + * @value: Value to write + * @return 0 if OK, -ve on error + */ +int rtc_write32(struct udevice *dev, unsigned int reg, u32 value); + +#else int rtc_get (struct rtc_time *); int rtc_set (struct rtc_time *); void rtc_reset (void); -void GregorianDay (struct rtc_time *); -void to_tm (int, struct rtc_time *); -unsigned long mktime (unsigned int, unsigned int, unsigned int, - unsigned int, unsigned int, unsigned int); +/** + * rtc_read8() - Read an 8-bit register + * + * @reg: Register to read + * @return value read + */ +int rtc_read8(int reg); + +/** + * rtc_write8() - Write an 8-bit register + * + * @reg: Register to write + * @value: Value to write + */ +void rtc_write8(int reg, uchar val); + +/** + * rtc_read32() - Read a 32-bit value from the RTC + * + * @reg: Offset to start reading from + * @return value read + */ +u32 rtc_read32(int reg); + +/** + * rtc_write32() - Write a 32-bit value to the RTC + * + * @reg: Register to start writing to + * @value: Value to write + */ +void rtc_write32(int reg, u32 value); + +/** + * rtc_init() - Set up the real time clock ready for use + */ +void rtc_init(void); +#endif + +/** + * rtc_calc_weekday() - Work out the weekday from a time + * + * This only works for the Gregorian calendar - i.e. after 1752 (in the UK). + * It sets time->tm_wdaay to the correct day of the week. + * + * @time: Time to inspect. tm_wday is updated + * @return 0 if OK, -EINVAL if the weekday could not be determined + */ +int rtc_calc_weekday(struct rtc_time *time); + +/** + * rtc_to_tm() - Convert a time_t value into a broken-out time + * + * The following fields are set up by this function: + * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year, tm_wday + * + * Note that tm_yday and tm_isdst are set to 0. + * + * @time_t: Number of seconds since 1970-01-01 00:00:00 + * @time: Place to put the broken-out time + * @return 0 if OK, -EINVAL if the weekday could not be determined + */ +int rtc_to_tm(int time_t, struct rtc_time *time); + +/** + * rtc_mktime() - Convert a broken-out time into a time_t value + * + * The following fields need to be valid for this function to work: + * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year + * + * Note that tm_wday and tm_yday are ignored. + * + * @time: Broken-out time to convert + * @return corresponding time_t value, seconds since 1970-01-01 00:00:00 + */ +unsigned long rtc_mktime(const struct rtc_time *time); #endif /* _RTC_H_ */