This is still a non-generic board.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Po-Yu Chuang <ratbert@faraday-tech.com>
Acked-by: Marek Vasut <marex@denx.de>
bool "Support integratorcp_cm920t"
select CPU_ARM920T
-config TARGET_A320EVB
- bool "Support a320evb"
- select CPU_ARM920T
-
config ARCH_AT91
bool "Atmel AT91"
source "board/denx/m53evk/Kconfig"
source "board/embest/mx6boards/Kconfig"
source "board/esg/ima3-mx53/Kconfig"
-source "board/faraday/a320evb/Kconfig"
source "board/freescale/ls2085a/Kconfig"
source "board/freescale/ls1021aqds/Kconfig"
source "board/freescale/ls1021atwr/Kconfig"
obj-y += cpu.o
obj-$(CONFIG_USE_IRQ) += interrupts.o
-obj-$(if $(filter a320,$(SOC)),y) += a320/
obj-$(CONFIG_EP93XX) += ep93xx/
obj-$(CONFIG_IMX) += imx/
obj-$(CONFIG_S3C24X0) += s3c24x0/
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y += reset.o
-obj-y += timer.o
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-.global reset_cpu
-reset_cpu:
- b reset_cpu
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <div64.h>
-#include <asm/io.h>
-#include <faraday/ftpmu010.h>
-#include <faraday/fttmr010.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define TIMER_CLOCK 32768
-#define TIMER_LOAD_VAL 0xffffffff
-
-static inline unsigned long long tick_to_time(unsigned long long tick)
-{
- tick *= CONFIG_SYS_HZ;
- do_div(tick, gd->arch.timer_rate_hz);
-
- return tick;
-}
-
-static inline unsigned long long usec_to_tick(unsigned long long usec)
-{
- usec *= gd->arch.timer_rate_hz;
- do_div(usec, 1000000);
-
- return usec;
-}
-
-int timer_init(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
- unsigned int cr;
-
- debug("%s()\n", __func__);
-
- /* disable timers */
- writel(0, &tmr->cr);
-
- /* use 32768Hz oscillator for RTC, WDT, TIMER */
- ftpmu010_32768osc_enable();
-
- /* setup timer */
- writel(TIMER_LOAD_VAL, &tmr->timer3_load);
- writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
- writel(0, &tmr->timer3_match1);
- writel(0, &tmr->timer3_match2);
-
- /* we don't want timer to issue interrupts */
- writel(FTTMR010_TM3_MATCH1 |
- FTTMR010_TM3_MATCH2 |
- FTTMR010_TM3_OVERFLOW,
- &tmr->interrupt_mask);
-
- cr = readl(&tmr->cr);
- cr |= FTTMR010_TM3_CLOCK; /* use external clock */
- cr |= FTTMR010_TM3_ENABLE;
- writel(cr, &tmr->cr);
-
- gd->arch.timer_rate_hz = TIMER_CLOCK;
- gd->arch.tbu = gd->arch.tbl = 0;
-
- return 0;
-}
-
-/*
- * Get the current 64 bit timer tick count
- */
-unsigned long long get_ticks(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
- ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
-
- /* increment tbu if tbl has rolled over */
- if (now < gd->arch.tbl)
- gd->arch.tbu++;
- gd->arch.tbl = now;
- return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl;
-}
-
-void __udelay(unsigned long usec)
-{
- unsigned long long start;
- ulong tmo;
-
- start = get_ticks(); /* get current timestamp */
- tmo = usec_to_tick(usec); /* convert usecs to ticks */
- while ((get_ticks() - start) < tmo)
- ; /* loop till time has passed */
-}
-
-/*
- * get_timer(base) can be used to check for timeouts or
- * to measure elasped time relative to an event:
- *
- * ulong start_time = get_timer(0) sets start_time to the current
- * time value.
- * get_timer(start_time) returns the time elapsed since then.
- *
- * The time is used in CONFIG_SYS_HZ units!
- */
-ulong get_timer(ulong base)
-{
- return tick_to_time(get_ticks()) - base;
-}
-
-/*
- * Return the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- return gd->arch.timer_rate_hz;
-}
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __A320_H
-#define __A320_H
-
-/*
- * Hardware register bases
- */
-#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */
-#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */
-#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */
-#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */
-#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */
-#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */
-#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/
-
-#endif /* __A320_H */
+++ /dev/null
-if TARGET_A320EVB
-
-config SYS_BOARD
- default "a320evb"
-
-config SYS_VENDOR
- default "faraday"
-
-config SYS_SOC
- default "a320"
-
-config SYS_CONFIG_NAME
- default "a320evb"
-
-endif
+++ /dev/null
-A320EVB BOARD
-M: Po-Yu Chuang <ratbert@faraday-tech.com>
-S: Maintained
-F: board/faraday/a320evb/
-F: include/configs/a320evb.h
-F: configs/a320evb_defconfig
+++ /dev/null
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := a320evb.o
-obj-y += lowlevel_init.o
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftsmc020.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init(void)
-{
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- ftsmc020_init(); /* initialize Flash */
- return 0;
-}
-
-int dram_init(void)
-{
- unsigned long sdram_base = PHYS_SDRAM_1;
- unsigned long expected_size = PHYS_SDRAM_1_SIZE;
- unsigned long actual_size;
-
- actual_size = get_ram_size((void *)sdram_base, expected_size);
-
- gd->ram_size = actual_size;
-
- if (expected_size != actual_size)
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ftmac100_initialize(bd);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->interface = FLASH_CFI_X8;
- return 1;
- } else
- return 0;
-}
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <config.h>
-#include <version.h>
-
-#include <asm/macro.h>
-#include <faraday/ftsdmc020.h>
-
-/*
- * parameters for the SDRAM controller
- */
-#define TP0_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0)
-#define TP1_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1)
-#define CR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR)
-#define B0_BSR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR)
-#define ACR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR)
-
-#define TP0_D CONFIG_SYS_FTSDMC020_TP0
-#define TP1_D CONFIG_SYS_FTSDMC020_TP1
-#define CR_D1 FTSDMC020_CR_IPREC
-#define CR_D2 FTSDMC020_CR_ISMR
-#define CR_D3 FTSDMC020_CR_IREF
-
-#define B0_BSR_D (CONFIG_SYS_FTSDMC020_BANK0_BSR | \
- FTSDMC020_BANK_BASE(PHYS_SDRAM_1))
-#define ACR_D FTSDMC020_ACR_TOC(0x18)
-
-/*
- * numeric 7 segment display
- */
-.macro led, num
- write32 CONFIG_DEBUG_LED, \num
-.endm
-
-/*
- * Waiting for SDRAM to set up
- */
-.macro wait_sdram
- ldr r0, =CONFIG_FTSDMC020_BASE
-1:
- ldr r1, [r0, #FTSDMC020_OFFSET_CR]
- cmp r1, #0
- bne 1b
-.endm
-
-.globl lowlevel_init
-lowlevel_init:
- mov r11, lr
-
- led 0x0
-
- bl init_sdmc
-
- led 0x1
-
- /* everything is fine now */
- mov lr, r11
- mov pc, lr
-
-/*
- * memory initialization
- */
-init_sdmc:
- led 0x10
-
- /* set SDRAM register */
-
- write32 TP0_A, TP0_D
- led 0x11
-
- write32 TP1_A, TP1_D
- led 0x12
-
- /* set to precharge */
- write32 CR_A, CR_D1
- led 0x13
-
- wait_sdram
- led 0x14
-
- /* set mode register */
- write32 CR_A, CR_D2
- led 0x15
-
- wait_sdram
- led 0x16
-
- /* set to refresh */
- write32 CR_A, CR_D3
- led 0x17
-
- wait_sdram
- led 0x18
-
- write32 B0_BSR_A, B0_BSR_D
- led 0x19
-
- write32 ACR_A, ACR_D
- led 0x1a
-
- mov pc, lr
+++ /dev/null
-CONFIG_ARM=y
-CONFIG_TARGET_A320EVB=y
Board Arch CPU Commit Removed Last known maintainer/contact
=================================================================================================
+a320evb arm arm920t - - Po-Yu Chuang <ratbert@faraday-tech.com>
cm4008 arm arm920t - - Greg Ungerer <greg.ungerer@opengear.com>
cm41xx arm arm920t - -
dkb arm arm926ejs - - Lei Wen <leiwen@marvell.com>
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * Configuation settings for the Faraday A320 board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch/a320.h>
-
-/*
- * mach-type definition
- */
-#define MACH_TYPE_FARADAY 758
-#define CONFIG_MACH_TYPE MACH_TYPE_FARADAY
-
-/*
- * Linux kernel tagged list
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-/*
- * CPU and Board Configuration Options
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Power Management Unit
- */
-#define CONFIG_FTPMU010_POWER
-
-/*
- * Timer
- */
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART */
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 0x98200000
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_CLK 18432000
-
-/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * SDRAM controller configuration
- */
-#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \
- FTSDMC020_TP0_TRP(1) | \
- FTSDMC020_TP0_TRCD(1) | \
- FTSDMC020_TP0_TRF(3) | \
- FTSDMC020_TP0_TWR(1) | \
- FTSDMC020_TP0_TCL(2))
-
-#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \
- FTSDMC020_TP1_INI_REFT(8) | \
- FTSDMC020_TP1_REF_INTV(0x180))
-
-#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \
- FTSDMC020_BANK_DDW_X16 | \
- FTSDMC020_BANK_DSZ_256M | \
- FTSDMC020_BANK_MBW_32 | \
- FTSDMC020_BANK_SIZE_64M)
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-
-/*
- * Load address and memory test area should agree with
- * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x2000000)
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x3F00000)
-
-#define CONFIG_SYS_TEXT_BASE 0
-
-/*
- * Static memory controller configuration
- */
-
-#define CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
- FTSMC020_BANK_SIZE_1M | \
- FTSMC020_BANK_MBW_8)
-
-#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_2) | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-
-/*
- * FLASH and environment organization
- */
-
-/* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-/* support JEDEC */
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx8
-
-#define PHYS_FLASH_1 0x00000000
-#define PHYS_FLASH_2 0x00400000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, }
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-
-/* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_BANKS 2
-
-/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#undef CONFIG_SYS_FLASH_EMPTY_INFO
-
-/* environments */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000)
-#define CONFIG_ENV_SIZE 0x20000
-
-#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff