}
static unsigned long UPMATable[] = {
- 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, //Words 0 to 3
- 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, //Words 4 to 7
- 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 8 to 11
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 12 to 15
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 16 to 19
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 20 to 23
- 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, //Words 24 to 27
- 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, //Words 28 to 31
- 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, //Words 32 to 35
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 36 to 39
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 40 to 43
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 44 to 47
- 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, //Words 48 to 51
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, //Words 52 to 55
- 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, //Words 56 to 59
- 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 //Words 60 to 63
+ 0x8fffec00, 0x0ffcfc00, 0x0ffcfc00, 0x0ffcfc00, /* Words 0 to 3 */
+ 0x0ffcfc04, 0x3ffdfc00, 0xfffffc01, 0xfffffc01, /* Words 4 to 7 */
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 8 to 11 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 12 to 15 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 16 to 19 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 20 to 23 */
+ 0x8fffec00, 0x00fffc00, 0x00fffc00, 0x00fffc00, /* Words 24 to 27 */
+ 0x0ffffc04, 0xfffffc01, 0xfffffc01, 0xfffffc01, /* Words 28 to 31 */
+ 0xfffffc00, 0xfffffc01, 0xfffffc01, 0xfffffc00, /* Words 32 to 35 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 36 to 39 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 40 to 43 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 44 to 47 */
+ 0xfffffc00, 0xfffffc04, 0xfffffc01, 0xfffffc00, /* Words 48 to 51 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00, /* Words 52 to 55 */
+ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01, /* Words 56 to 59 */
+ 0xffffec00, 0xffffec04, 0xffffec00, 0xfffffc01 /* Words 60 to 63 */
};
int board_early_init_f (void)
return 1;
}
}
-
+
/* issue the Read Identifier Codes command */
*addr = (FPW) INTEL_READID;
return ret;
}
-
-
/*-----------------------------------------------------------------------
*/
* erase and protect commands. The range of the addresses on which
* either of the commands is to operate can be given in two forms:
* 1. <cmd> start end - operate on <'start', 'end')
- * 2. <cmd> start +length - operate on <'start', start + length)
+ * 2. <cmd> start +length - operate on <'start', start + length)
* If the second form is used and the end address doesn't fall on the
* sector boundary, than it will be adjusted to the next sector boundary.
* If it isn't in the flash, the function will fail (return -1).
i = usb_init();
#ifdef CONFIG_USB_STORAGE
/* try to recognize storage devices immediately */
- if (i >= 0)
+ if (i >= 0)
usb_stor_curr_dev = usb_stor_scan(1);
-
#endif
return 0;
}
#include <405gp_pci.h>
#endif
-
-#undef USB_DEBUG
+#undef USB_DEBUG
#ifdef USB_DEBUG
#define USB_PRINTF(fmt,args...) printf (fmt ,##args)
if (result < 0)
return result;
- /*
+ /*
* NOTE: we do not get status and verify reset was successful
* as some devices are reported to lock up upon this check..
*/
/* some devices are flaky */
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN,
- (USB_DT_STRING << 8) + index, langid, buf, size,
+ (USB_DT_STRING << 8) + index, langid, buf, size,
USB_CNTL_TIMEOUT);
if (result > 0)
break;
- }
-
+ }
+
return result;
}
}
if (rc < 2)
- rc = -1;
+ rc = -1;
return rc;
}
}
}
dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
-
+
/* find the port number we're at */
if (parent) {
-
+
for (j = 0; j < parent->maxchild; j++) {
if (parent->children[j] == dev) {
port = j;
return -1;
if (portstatus & USB_PORT_STAT_ENABLE) {
-
+
break;
}
}
if(usb_storage_probe(dev,0,&usb_stor[usb_max_devs])) { /* ok, it is a storage devices */
/* get info and fill it in */
- if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
+ if(usb_stor_get_info(dev, &usb_stor[usb_max_devs], &usb_dev_desc[usb_max_devs]))
usb_max_devs++;
} /* if storage device */
if(usb_max_devs==USB_MAX_STOR_DEV) {
break;
}
} /* for */
-
+
usb_disable_asynch(0); /* asynch transfer allowed */
printf("%d Storage Device(s) found\n", usb_max_devs);
if(usb_max_devs>0)
retry = 0;
again:
USB_STOR_PRINTF("STATUS phase\n");
- result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
+ result = usb_bulk_msg(us->pusb_dev, pipein, &csw, UMASS_BBB_CSW_SIZE,
&actlen, USB_CNTL_TIMEOUT*5);
/* special handling of STALL in STATUS phase */
dev->descriptor.idProduct == 0x2010)
)
USB_STOR_PRINTF("usb_stor_get_info: skipping RESET..\n");
- else
+ else
ss->transport_reset(ss);
pccb->pdata = usb_stor_buf;
if(usb_inquiry(pccb,ss))
return -1;
-
+
perq = usb_stor_buf[0];
modi = usb_stor_buf[1];
if((perq & 0x1f) == 0x1f) {
return stat;
}
-
-
/*-------------------------------------------------------------------------*/
/* common code for handling submit messages - used for all but root hub */
wait_ms(1);
if (!urb_finished)
dbg("\%");
-
+
} else {
err("CTL:TIMEOUT ");
dbg("submit_common_msg: TO status %x\n", stat);
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (®s->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
stat = USB_ST_CRC_ERR;
break;
}
-
+
/* NOTE: since we are not interrupt driven in U-Boot and always
* handle only one URB at a time, we cannot assume the
* transaction finished on the first successful return from
struct ohci_regs *regs = ohci->regs;
int ints;
int stat = -1;
-
+
if ((ohci->hcca->done_head != 0) &&
!(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
ohci->disabled++;
err ("%s device removed!", ohci->slot_name);
return -1;
-
+
} else if ((ints &= readl (®s->intrenable)) == 0) {
dbg("hc_interrupt: returning..\n");
return 0xff;
#ifndef _440_i2c_h_
#define _440_i2c_h_
-#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
+#if defined(CONFIG_440_EP) || defined(CONFIG_440_GR)
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000700)
#else
#define I2C_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x00000400)
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
-#define CONFIG_440_EP 1 /* Specific PPC440EP support */
+#define CONFIG_BAMBOO 1 /* Board is BAMBOO */
+#define CONFIG_440_EP 1 /* Specific PPC440EP support */
-#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#undef CFG_DRAM_TEST /* disable - takes long time! */
-//#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
+#define CONFIG_4xx 1 /* ... PPC4xx family */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#undef CFG_DRAM_TEST /* disable - takes long time! */
+/*#define CONFIG_SYS_CLK_FREQ 66666666 /X* external freq to pll */
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*-----------------------------------------------------------------------
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in SDRAM)
*----------------------------------------------------------------------*/
-#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
+#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x2000
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
-#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
-#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
-//#define CFG_SDRAM_BANKS (2)
-#define CFG_SDRAM_BANKS (1)
+#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+/*#define CFG_SDRAM_BANKS (2) */
+#define CFG_SDRAM_BANKS (1)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
#define CFG_EXT_SERIAL_CLOCK 11059200 /* use external 11.059MHz clk */
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SERIAL_MULTI 1
/*define this if you want console on UART1*/
#undef CONFIG_UART1_CONSOLE
* The DS1558 code assumes this condition
*
*----------------------------------------------------------------------*/
-#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
* FLASH related
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
#else
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
/*-----------------------------------------------------------------------
* I2C
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
-#define CFG_ENV_IS_IN_EEPROM 1
+#define CFG_ENV_IS_IN_EEPROM 1
/* Define to allow the user to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BOOTCOMMAND "bootm 0xfe000000" /* autoboot command */
#define CONFIG_BOOTDELAY 3 /* disable autoboot */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
-#define CONFIG_PHY1_ADDR 3
+#define CONFIG_MII 1 /* MII PHY management */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#define CONFIG_NETMASK 255.255.255.0
#ifdef CONFIG_440_EP
/* Need to define POST */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
- /* CFG_CMD_FAT |*/ \
- CFG_CMD_I2C | \
- /* CFG_CMD_IDE |*/ \
- CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
- /* CFG_CMD_SPI |*/ \
- CFG_CMD_USB | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
+ CFG_CMD_USB | \
0 ) & ~CFG_CMD_IMLS)
#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ECHO | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
- /* CFG_CMD_FAT |*/ \
- CFG_CMD_I2C | \
- /* CFG_CMD_IDE |*/ \
- CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
- /* CFG_CMD_SPI |*/ \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+ CFG_CMD_DATE | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_DIAG | \
+ CFG_CMD_ECHO | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_ELF | \
+ /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_FAT |*/ \
+ CFG_CMD_I2C | \
+ /* CFG_CMD_IDE |*/ \
+ CFG_CMD_IRQ | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
+ CFG_CMD_PCI | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
+ CFG_CMD_SDRAM | \
+ CFG_CMD_FLASH | \
+ /* CFG_CMD_SPI |*/ \
0 ) & ~CFG_CMD_IMLS)
#endif
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x100000 /* default load address */
-#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
*/
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
-#define CONFIG_4xx 1 /* ...member of PPC4xx family */
-#define CONFIG_WALNUT 1 /* ...on a WALNUT board */
- /* ...and on a SYCAMORE board */
+#define CONFIG_4xx 1 /* ...member of PPC4xx family */
+#define CONFIG_WALNUT 1 /* ...on a WALNUT board */
+ /* ...and on a SYCAMORE board */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
+#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"hostname=walnut\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"bootm $(kernel_addr)\0" \
"flash_self=run ramargs addip addtty;" \
"bootm $(kernel_addr) $(ramdisk_addr)\0" \
- "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
- "bootm\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \
+ "bootm\0" \
"rootpath=/opt/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/walnut/uImage\0" \
"kernel_addr=fff80000\0" \
"ramdisk_addr=fff80000\0" \
"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0" \
"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \
- "cp.b 100000 fffc0000 40000;" \
+ "cp.b 100000 fffc0000 40000;" \
"setenv filesize;saveenv\0" \
"upd=run load;run update\0" \
""
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
CFG_CMD_NFS | \
CFG_CMD_PCI | \
CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
CFG_CMD_SNTP )
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS 16 /* max number of command args */
* set Linux BASE_BAUD to 403200.
*/
#undef CONFIG_SERIAL_SOFTWARE_FIFO
-#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
-#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
-#define CFG_BASE_BAUD 691200
+#undef CFG_EXT_SERIAL_CLOCK /* external serial clock */
+#undef CFG_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
+#define CFG_BASE_BAUD 691200
/* The following table includes the supported baudrates */
#define CFG_BAUDRATE_TABLE \
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
-#define CONFIG_LOOPW 1 /* enable loopw command */
+#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
+#define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
*-----------------------------------------------------------------------
*/
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
-#undef CONFIG_SOFT_I2C /* I2C bit-banged */
+#undef CONFIG_SOFT_I2C /* I2C bit-banged */
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
* PCI stuff
*-----------------------------------------------------------------------
*/
-#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
-#define PCI_HOST_FORCE 1 /* configure as pci host */
-#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
-
-#define CONFIG_PCI /* include pci support */
-#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
-#define CONFIG_PCI_PNP /* do pci plug-and-play */
- /* resource configuration */
+#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
+#define PCI_HOST_FORCE 1 /* configure as pci host */
+#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
+
+#define CONFIG_PCI /* include pci support */
+#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
+#define CONFIG_PCI_PNP /* do pci plug-and-play */
+ /* resource configuration */
#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */
#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */
-#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
-#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
-#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
-#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
-#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
-#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
+#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
+#define CFG_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
+#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
+#define CFG_PCI_PTM2LA 0x00000000 /* disabled */
+#define CFG_PCI_PTM2MS 0x00000000 /* disabled */
+#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
/*
* Define here the location of the environment variables (FLASH or NVRAM).
* Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
- * supported for backward compatibility.
+ * supported for backward compatibility.
*/
#if 1
-#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
#else
#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
#endif
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
-#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
+#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0 /* FLASH bank #1 */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-#define CFG_FLASH_ADDR0 0x5555
-#define CFG_FLASH_ADDR1 0x2aaa
-#define CFG_FLASH_WORD_SIZE unsigned char
+#define CFG_FLASH_ADDR0 0x5555
+#define CFG_FLASH_ADDR1 0x2aaa
+#define CFG_FLASH_WORD_SIZE unsigned char
#ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
-#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
+#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
/* Address and size of Redundant Environment Sector */
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
/* Memory Bank 0 (Flash Bank 0) initialization */
#define CFG_EBC_PB0AP 0x9B015480
-#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB0CR 0xFFF18000 /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit */
#define CFG_EBC_PB1AP 0x02815480
-#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB1CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
#define CFG_EBC_PB2AP 0x04815A80
-#define CFG_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB2CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
#define CFG_EBC_PB3AP 0x01815280
-#define CFG_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB3CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */
#define CFG_EBC_PB7AP 0x01815280
-#define CFG_EBC_PB7CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
+#define CFG_EBC_PB7CR 0xF0318000 /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit */
/*-----------------------------------------------------------------------
* External peripheral base address
*-----------------------------------------------------------------------
*/
-#define CFG_KEY_REG_BASE_ADDR 0xF0100000
-#define CFG_IR_REG_BASE_ADDR 0xF0200000
-#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
+#define CFG_KEY_REG_BASE_ADDR 0xF0100000
+#define CFG_IR_REG_BASE_ADDR 0xF0200000
+#define CFG_FPGA_REG_BASE_ADDR 0xF0300000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
*/
-#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
+#define CFG_INIT_DCACHE_CS 4 /* use cs # 4 for data cache memory */
-#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
-#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
+#define CFG_INIT_RAM_ADDR 0x40000000 /* inside of SDRAM */
+#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
-#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* Definitions for Serial Presence Detect EEPROM address
* (to get SDRAM settings)
*/
-#define SPD_EEPROM_ADDRESS 0x50
+#define SPD_EEPROM_ADDRESS 0x50
/*
* Internal Definitions
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
+#define CONFIG_YELLOWSTONE 1 /* Board is BAMBOO */
#define CONFIG_440_GR 1 /* Specific PPC440GR support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* disable - takes long time! */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x2000
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
-#define CFG_SDRAM_BANKS (2)
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
*
*----------------------------------------------------------------------*/
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
* FLASH related
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
/*-----------------------------------------------------------------------
* I2C
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
#define CFG_ENV_IS_IN_EEPROM 1
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#ifdef CONFIG_440_EP
/* Need to define POST */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
CFG_CMD_USB | \
0 ) & ~CFG_CMD_IMLS)
#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
0 ) & ~CFG_CMD_IMLS)
#endif
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
-#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
+#define CONFIG_YOSEMITE 1 /* Board is BAMBOO */
#define CONFIG_440_EP 1 /* Specific PPC440EP support */
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
#undef CFG_DRAM_TEST /* disable - takes long time! */
#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */
*----------------------------------------------------------------------*/
#define CFG_INIT_RAM_ADDR 0xf0000000 /* DCache */
#define CFG_INIT_RAM_END 0x2000
-#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
+#define CFG_GBL_DATA_SIZE 256 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/
-#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
-#define CFG_SDRAM_BANKS (2)
+#define CFG_KBYTES_SDRAM ( 128 * 1024) /* 128MB */
+#define CFG_SDRAM_BANKS (2)
/*-----------------------------------------------------------------------
* Serial Port
*----------------------------------------------------------------------*/
*
*----------------------------------------------------------------------*/
#define CFG_NVRAM_SIZE (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
-#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
+#define CONFIG_RTC_DS1556 1 /* DS1556 RTC */
/*-----------------------------------------------------------------------
* FLASH related
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 120000 /* Timeout for Flash Write (in ms) */
#else
-#define CFG_FLASH_CFI /* The flash is CFI compatible */
-#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
+#define CFG_FLASH_CFI /* The flash is CFI compatible */
+#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
+#define CFG_FLASH_CFI_AMD_RESET 1 /* AMD RESET for STM 29W320DB! */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
#define CFG_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
-#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
+#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */
/*-----------------------------------------------------------------------
* I2C
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
-#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
+#undef CFG_ENV_IS_IN_NVRAM /*No NVRAM on board*/
#undef CFG_ENV_IS_IN_FLASH /* ... not in flash */
#define CFG_ENV_IS_IN_EEPROM 1
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_NET_MULTI 1 /* required for netconsole */
+#define CONFIG_NET_MULTI 1 /* required for netconsole */
#define CONFIG_PHY1_ADDR 3
#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */
#define CONFIG_PHY_ADDR 1 /* PHY address, See schematics */
#ifdef CONFIG_440_EP
/* Need to define POST */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
CFG_CMD_USB | \
0 ) & ~CFG_CMD_IMLS)
#else
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
+#define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
CFG_CMD_DHCP | \
CFG_CMD_DIAG | \
CFG_CMD_ECHO | \
CFG_CMD_EEPROM | \
CFG_CMD_ELF | \
- /* CFG_CMD_EXT2 |*/ \
+ /* CFG_CMD_EXT2 |*/ \
/* CFG_CMD_FAT |*/ \
CFG_CMD_I2C | \
/* CFG_CMD_IDE |*/ \
CFG_CMD_IRQ | \
- /* CFG_CMD_KGDB |*/ \
- CFG_CMD_MII | \
+ /* CFG_CMD_KGDB |*/ \
+ CFG_CMD_MII | \
CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
+ CFG_CMD_PING | \
+ CFG_CMD_REGINFO | \
CFG_CMD_SDRAM | \
- CFG_CMD_FLASH | \
+ CFG_CMD_FLASH | \
/* CFG_CMD_SPI |*/ \
0 ) & ~CFG_CMD_IMLS)
#endif
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
-#define CONFIG_LYNXKDI 1 /* support kdi files */
+#define CONFIG_LYNXKDI 1 /* support kdi files */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
*-----------------------------------------------------------------------
*/
/* General PCI */
-#define CONFIG_PCI /* include pci support */
-#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
-#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
-#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
+#define CONFIG_PCI /* include pci support */
+#undef CONFIG_PCI_PNP /* do (not) pci plug-and-play */
+#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
+#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */
/* Board-specific PCI */
-#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
+#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */
#define CFG_PCI_TARGET_INIT
#define CFG_PCI_MASTER_INIT
-#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
-#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
+#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe /* Whatever */
/*
* For booting Linux, the board info and command line data
projects / karo-tx-uboot.git / commitdiff