Changes for U-Boot 0.4.7:
======================================================================
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+ add support for Adder II MPC852T module
+
* Patch by George G. Davis, 19 Aug 2003:
fix TI Innovator/OMAP1510 pin configs
#########################################################################
LIST_8xx=" \
- ADS860 AMX860 c2mon CCM \
- cogent_mpc8xx ESTEEM192E ETX094 ELPT860 \
- FADS823 FADS850SAR FADS860T FLAGADM \
- FPS850L GEN860T GEN860T_SC GENIETV \
- GTH hermes IAD210 ICU862_100MHz \
- IP860 IVML24 IVML24_128 IVML24_256 \
- IVMS8 IVMS8_128 IVMS8_256 KUP4K \
- LANTEC lwmon MBX MBX860T \
- MHPC MPC86xADS MVS1 NETVIA \
- NETVIA_V2 NX823 pcu_e R360MPI \
- RBC823 rmu RPXClassic RPXlite \
- RRvision SM850 SPD823TS svm_sc8xx \
- SXNI855T TOP860 TQM823L TQM823L_LCD \
- TQM850L TQM855L TQM860L v37 \
+ AdderII ADS860 AMX860 c2mon \
+ CCM cogent_mpc8xx ESTEEM192E ETX094 \
+ ELPT860 FADS823 FADS850SAR FADS860T \
+ FLAGADM FPS850L GEN860T GEN860T_SC \
+ GENIETV GTH hermes IAD210 \
+ ICU862_100MHz IP860 IVML24 IVML24_128 \
+ IVML24_256 IVMS8 IVMS8_128 IVMS8_256 \
+ KUP4K LANTEC lwmon MBX \
+ MBX860T MHPC MPC86xADS MVS1 \
+ NETVIA NETVIA_V2 NX823 pcu_e \
+ R360MPI RBC823 rmu RPXClassic \
+ RPXlite RRvision SM850 SPD823TS \
+ svm_sc8xx SXNI855T TOP860 TQM823L \
+ TQM823L_LCD TQM850L TQM855L TQM860L \
+ v37 \
"
#########################################################################
## MPC8xx Systems
#########################################################################
+AdderII_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx adderII
+
ADS860_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o flash.o
+
+$(LIB): .depend $(OBJS)
+ $(AR) crv $@ $(OBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <mpc8xx.h>
+
+/*
+ * Check Board Identity:
+ */
+
+int checkboard( void )
+{
+ puts("Board: ");
+ puts("AdderII(MPC852T)\n" );
+
+ return 0;
+}
+
+#if defined( CONFIG_SDRAM_50MHZ )
+
+/******************************************************************************
+** for chip Samsung K4S643232F - T70
+** this table is for 32-50MHz operation
+*******************************************************************************/
+
+#define SDRAM_MPTPRVALUE 0x0200
+
+#define SDRAM_MAMRVALUE0 0x00802114 /* refresh at 32MHz */
+#define SDRAM_MAMRVALUE1 0x00802118
+
+#define SDRAM_OR1VALUE 0xff800e00
+#define SDRAM_BR1VALUE 0x00000081
+
+#define SDRAM_MARVALUE 94
+
+#define SDRAM_MCRVALUE0 0x80808105
+#define SDRAM_MCRVALUE1 0x80808130
+
+const uint sdram_table[] = {
+
+ /* single read (offset 0x00 in upm ram) */
+ 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xe0bbbc00,
+ 0x10f77c44, 0xf3fffc07, 0xfffffc04, 0xfffffc04,
+
+ /* burst read (offset 0x08 in upm ram) */
+ 0x1f07fc24, 0xe0aefc04, 0x10adfc04, 0xf0affc00,
+ 0xf0affc00, 0xf0affc00, 0xf0affc00, 0x10a77c44,
+ 0xf7bffc47, 0xfffffc35, 0xfffffc34, 0xfffffc35,
+ 0xfffffc35, 0x1ff77c35, 0xfffffc34, 0x1fb57c35,
+
+ /* single write (offset 0x18 in upm ram) */
+ 0x1f27fc24, 0xe0aebc04, 0x00b93c00, 0x13f77c47,
+ 0xfffdfc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* burst write (offset 0x20 in upm ram) */
+ 0x1f07fc24, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
+ 0xf0affc00, 0xe0abbc00, 0x1fb77c47, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* refresh (offset 0x30 in upm ram) */
+ 0x1ff5fca4, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+ 0xfffffc84, 0xfffffc07, 0xfffffc04, 0xfffffc04,
+ 0xfffffc04, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+
+ /* exception (offset 0x3C in upm ram) */
+ 0xfffffc27, 0xfffffc04, 0xfffffc04, 0xfffffc04,
+};
+
+#else
+#error SDRAM not correctly configured
+#endif
+
+int _initsdram (uint base, uint noMbytes)
+{
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ if (noMbytes != 8) {
+ return -1;
+ }
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ memctl->memc_mptpr = SDRAM_MPTPRVALUE;
+
+ /* Configure the refresh (mostly). This needs to be
+ * based upon processor clock speed and optimized to provide
+ * the highest level of performance. For multiple banks,
+ * this time has to be divided by the number of banks.
+ * Although it is not clear anywhere, it appears the
+ * refresh steps through the chip selects for this UPM
+ * on each refresh cycle.
+ * We have to be careful changing
+ * UPM registers after we ask it to run these commands.
+ */
+
+ memctl->memc_mamr = (SDRAM_MAMRVALUE0 | (SDRAM_MARVALUE << 24));
+ memctl->memc_mar = 0x0;
+ udelay (200);
+
+ /* Now run the precharge/nop/mrs commands.
+ */
+ memctl->memc_mcr = 0x80002115;
+ udelay (200);
+
+ /* Run 8 refresh cycles */
+ memctl->memc_mcr = 0x80002380;
+ udelay (200);
+
+ memctl->memc_mar = 0x88;
+ udelay (200);
+
+ memctl->memc_mcr = 0x80002116;
+ udelay (200);
+
+ memctl->memc_or1 = SDRAM_OR1VALUE;
+ memctl->memc_br1 = SDRAM_BR1VALUE | base;
+
+ return 0;
+}
+
+void _sdramdisable( void )
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ memctl->memc_br1 = 0x00000000;
+
+ /* maybe we should turn off upma here or something */
+}
+
+int initsdram (uint base, uint * noMbytes)
+{
+ uint m = 8;
+
+ *noMbytes = m;
+
+ if (!_initsdram (base, m)) {
+ return 0;
+ } else {
+ _sdramdisable ();
+ return -1;
+ }
+}
+
+long int initdram (int board_type)
+{
+ /* AdderII: has 8MB SDRAM */
+ uint sdramsz;
+ uint m = 0;
+
+ if (!initsdram (0x00000000, &sdramsz)) {
+ m += sdramsz;
+ } else {
+ return -1;
+ }
+ return (m << 20);
+}
+
+int testdram (void)
+{
+ /* TODO: XXX XXX XXX not an actual SDRAM test */
+ printf ("Test: 8MB SDRAM\n");
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/****************************************************************************
+ * FLASH Memory Map as used by FADS Monitor:
+ *
+ * Start Address Length
+ * +-----------------------+ 0xFE00_0000 Start of Flash -----------------
+ * | MON8xx code | 0xFE00_0100 Reset Vector
+ * +-----------------------+ 0xFE0?_????
+ * | (unused) |
+ * +-----------------------+
+ * | |
+ * +-----------------------+
+ * | |
+ * +-----------------------+
+ * | |
+ * +-----------------------+
+ * | |
+ * +=======================+
+ * | |
+ * | ... |
+ *****************************************************************************/
+
+
--- /dev/null
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# AdderII board ( Analogue-Micro )
+#
+
+TEXT_BASE = 0xFE000000
+
--- /dev/null
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+/******************************************************************************
+** Notes: AM29LV320DB - 90EI ( 32 Mbit device )
+** Sectors - Eight 8 Kb sector
+** - Sixty three 64 Kb sector
+** Bottom boot sector
+******************************************************************************/
+#include <common.h>
+#include <mpc8xx.h>
+
+
+/******************************************************************************
+** Defines
+******************************************************************************/
+#ifdef CONFIG_ADDERII
+
+#define ADDR0 0x0555
+#define ADDR1 0x02AA
+#define FLASH_WORD_SIZE unsigned short
+
+#endif
+
+#if defined( CFG_ENV_IS_IN_FLASH )
+# ifndef CFG_ENV_ADDR
+# define CFG_ENV_ADDR ( CFG_FLASH_BASE + CFG_ENV_OFFSET )
+# endif
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+# ifndef CFG_ENV_SECT_SIZE
+# define CFG_ENV_SECT_SIZE CFG_ENV_SIZE
+# endif
+#endif
+
+/******************************************************************************
+** Global Parameters
+******************************************************************************/
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+/******************************************************************************
+** Function Prototypes
+******************************************************************************/
+static ulong flash_get_size( vu_long *addr, flash_info_t *info );
+
+static int write_word( flash_info_t *info, ulong dest, ulong data );
+
+static void flash_get_offsets( ulong base, flash_info_t *info );
+
+int wait_for_DQ7( flash_info_t *info, int sect );
+
+/******************************************************************************
+** Function : flash_init
+** Param : void
+** Notes : Initializes the Flash Chip
+******************************************************************************/
+ulong flash_init (void)
+{
+ ulong size_b0 = -1;
+ int i;
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+ /* Set Flash to unknown */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Get the Flash Bank Size */
+
+ size_b0 = flash_get_size ((vu_long *) (CFG_FLASH_BASE),
+ &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## UNKNOWN Flash on Bank 0 - Size = 0x%08lx = %ldMB\n",
+ size_b0, size_b0 >> 20);
+ }
+
+ /* Remap Flash according to size detected */
+ memctl->memc_or0 = 0xFF800774;
+ memctl->memc_br0 = CFG_BR0_PRELIM;
+
+ /* Setup Flash Sector Offsets */
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ /* Monitor Protection ON - default */
+
+#if ( CFG_MONITOR_BASE >= CFG_FLASH_BASE )
+ flash_protect (FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ (CFG_MONITOR_BASE + monitor_flash_len - 1),
+ &flash_info[0]);
+#endif
+
+ /* Protect Environment Variables */
+#ifdef CFG_ENV_IS_IN_FLASH
+ flash_protect (FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ (CFG_ENV_ADDR + CFG_ENV_SIZE - 1), &flash_info[0]);
+#endif
+
+ return size_b0;
+}
+
+/******************************************************************************
+** Function : flash_get_offsets
+** Param : ulong base, flash_into_t *info
+** Notes :
+******************************************************************************/
+static void flash_get_offsets (ulong base, flash_info_t * info)
+{
+ return;
+}
+
+
+/******************************************************************************
+** Function : flash_print_info
+** Param : flash_info_t
+** Notes :
+******************************************************************************/
+void flash_print_info (flash_info_t * info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Missing or unknown flash type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD:
+ printf ("AMD ");
+ break;
+ case FLASH_MAN_FUJ:
+ printf ("FUJITSU ");
+ break;
+ case FLASH_MAN_BM:
+ printf ("BRIGHT MICRO ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM320B:
+ printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T:
+ printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n", info->size >> 20,
+ info->sector_count);
+ printf (" Sector Start Addresses:");
+
+ for (i = 0; i < info->sector_count; ++i) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+ return;
+}
+
+/******************************************************************************
+** Function : flash_get_size
+** Param : vu_long *addr, flash_info_t *info
+** Notes :
+******************************************************************************/
+static ulong flash_get_size (vu_long * addr, flash_info_t * info)
+{
+ short i;
+ FLASH_WORD_SIZE manu_id, dev_id;
+ ulong base = (ulong) addr;
+ volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+
+ /* Write Auto Select Command and read Manufacturer's ID and Dev ID */
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
+
+ manu_id = addr2[0];
+
+ switch (manu_id) {
+ case (FLASH_WORD_SIZE) AMD_MANUFACT:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ break;
+ }
+
+ /* Read Device Id */
+ dev_id = addr2[1];
+
+ switch (dev_id) {
+ case (FLASH_WORD_SIZE) AMD_ID_LV320B:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71; /* 8 - boot sec + 63 normal */
+ info->size = 0x400000; /* 4MByte */
+ break;
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ break;
+ }
+
+ /* Set up sector start Addresses */
+
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block
+ ** Eight 8 Kb Boot sectors
+ ** Sixty Three 64Kb sectors
+ */
+ for (i = 0; i < 8; i++) {
+ info->start[i] = base + (i * 0x00002000);
+ }
+ for (i = 8; i < info->sector_count; i++) {
+ info->start[i] = base + (i * 0x00010000) - 0x00070000;
+ }
+ }
+
+ /* Reset To read mode */
+
+ if (info->flash_id != FLASH_UNKNOWN) {
+ addr = (ulong *) info->start[0];
+ *addr = 0xF0F0F0F0;
+ }
+ return (info->size);
+}
+
+/*******************************************************************************
+** Function : flash_erase
+** Param : flash_info_t *info, int s_first, int s_last
+** Notes :
+******************************************************************************/
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *addr2;
+ int flag, prot, sect, l_sect;
+ int i;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("Can't erase unknown flash type - aborted\n");
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+
+ if (info->protect[sect] == 0) { /* not protected */
+ addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+
+ if ((info->flash_id & FLASH_VENDMASK) ==
+ FLASH_MAN_SST) {
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ for (i = 0; i < 50; i++)
+ udelay (1000); /* wait 1 ms */
+ } else {
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
+ addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ }
+ l_sect = sect;
+ /*
+ * Wait for each sector to complete, it's more
+ * reliable. According to AMD Spec, you must
+ * issue all erase commands within a specified
+ * timeout. This has been seen to fail, especially
+ * if printf()s are included (for debug)!!
+ */
+ wait_for_DQ7 (info, sect);
+ }
+ }
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /* reset to read mode */
+ addr = (FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+int wait_for_DQ7 (flash_info_t * info, int sect)
+{
+ ulong start, now, last;
+ volatile FLASH_WORD_SIZE *addr =
+ (FLASH_WORD_SIZE *) (info->start[sect]);
+
+ start = get_timer (0);
+ last = start;
+ while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (FLASH_WORD_SIZE) 0x00800080) {
+ if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return -1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) {
+ putc ('.');
+ last = now;
+ }
+ }
+ return 0;
+}
+
+
+/******************************************************************************
+** Function : write_buff
+** Param : flash_info_t *info, uchar *src, ulong addr, ulong cnt
+** Notes :
+******************************************************************************/
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ /* get lower word aligned address */
+ wp = (addr & ~3);
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ return (write_word (info, wp, data));
+}
+
+
+/******************************************************************************
+** Function : write_word
+** Param : flash_info_t *info, ulong dest, ulong data
+** Notes :
+******************************************************************************/
+static int write_word (flash_info_t * info, ulong dest, ulong data)
+{
+ volatile FLASH_WORD_SIZE *addr2 =
+ (FLASH_WORD_SIZE *) (info->start[0]);
+ volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
+ volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ ulong start;
+ int i;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((volatile FLASH_WORD_SIZE *) dest) &
+ (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ return (2);
+ }
+
+ for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
+ int flag;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts ();
+
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
+ addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+
+ dest2[i] = data2[i];
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts ();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+ if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ }
+
+ return (0);
+}
--- /dev/null
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/mpc8xx/start.o (.text)
+/*
+ cpu/mpc8xx/start.o (.text)
+ common/dlmalloc.o (.text)
+ lib_ppc/ppcstring.o (.text)
+ lib_generic/vsprintf.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_generic/zlib.o (.text)
+
+ . = env_offset;
+ common/environment.o(.text)
+*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ . = ALIGN(256 * 1024);
+ .ppcenv :
+ {
+ common/environment.o (.ppcenv)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
+
#
-# (C) Copyright 2000
+# (C) Copyright 2000-2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
case 0x05010000: suf = "D3"; m = 1; break;
case 0x05020000: suf = "D4"; m = 1; break;
+ case 0x08000003: suf = ""; m = 1; break;
/* this value is not documented anywhere */
case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
#endif
* I owe him a free beer. - wd]
*/
-#if defined(CONFIG_GTH) || \
+#if defined(CONFIG_ADDERII) || \
+ defined(CONFIG_GTH) || \
defined(CONFIG_HERMES) || \
defined(CONFIG_ICU862) || \
defined(CONFIG_IP860) || \
--- /dev/null
+/******************************************************************************
+* A collection of structures, addresses, and values associated with
+* the Motorola 850T AdderIIF board. Copied from the FADS stuff.
+* Magnus Damm added defines for 8xxrom and extended bd_info.
+* Helmut Buchsbaum added bitvalues for BCSRx
+*
+* Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
+*******************************************************************************
+* 2003-JUL: The AdderII is using the following physical memorymap:
+*******************************************************************************
+* FA200000 -> FA20FFFF : IMAP internal in the cpu
+* FE000000 -> FE400000 : flash connected to CS0, setup by 8xxrom
+* 00000000 -> 00800000 : sdram setup by 8xxrom
+*******************************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <mpc8xx_irq.h>
+
+#define CONFIG_MPC860 1
+#define CONFIG_MPC860T 1
+#define CONFIG_ADDERII 1
+
+/* CPU Clock speed */
+#define MPC8XX_FACT 12 /* Multilpy by 12 */
+#define MPC8XX_XIN 4000000 /* 4MHz */
+#define MPC8XX_HZ ( MPC8XX_FACT * MPC8XX_XIN )
+
+#define CONFIG_8xx_GCLK_FREQ MPC8XX_HZ
+#define CONFIG_SDRAM_50MHZ 1
+
+
+/* Default Serial Console, baudrate */
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#define CONFIG_BAUDRATE 38400
+#define CONFIG_LOADS_ECHO 1
+
+/* FEC Ethernet controller configurations */
+#define CONFIG_FEC_ETH 1
+#define CONFIG_NET_MULTI 1
+#define FEC_ENET 1
+
+/* Interrupt level assignments.
+*/
+#define FEC_INTERRUPT SIU_LEVEL3 /* FEC interrupt */
+
+/* Older kernels need clock in MHz newer in Hz */
+#define CONFIG_CLOCKS_IN_MHZ 1
+
+/* Monitor Functions */
+#define CONFIG_COMMANDS ( CFG_CMD_FLASH | \
+ CFG_CMD_MEMORY| \
+ CFG_CMD_NET | \
+ CFG_CMD_ENV | \
+ CFG_CMD_PING | \
+ CFG_CMD_SDRAM )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/* Configuration Settings */
+#define CFG_PROMPT "=>" /* Monitor Command Prompt */
+
+#if ( CONFIG_COMMANDS & CFG_CMD_KGDB )
+#define CFG_CBSIZE 1024 /* Console I/P buffer size */
+#else
+#define CFG_CBSIZE 256
+#endif
+
+#define CFG_PBSIZE ( CFG_CBSIZE + sizeof( CFG_PROMPT ) + 16 )
+ /* Print buffer size */
+
+#define CFG_MAXARGS 16 /* Max number of cmd args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot args buffer size */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_MEMTEST_START 0x00100000 /* Mem test works on */
+#define CFG_MEMTEST_END 0x00800000 /* 1 ... 8MB in SDRAM */
+
+#define CFG_LOAD_ADDR 0x00100000
+#define CFG_HZ 1000
+
+/******************************************************************************
+** Low level configuration settings.
+** ( adderss mappings, register init values, etc. )
+** You should know what you are doing if you make changes here.
+******************************************************************************/
+/* Start address for the final memory configuration set up by startup code
+** Please note that CFG_SDRAM_BASE must start at 0
+*/
+
+#define CFG_SDRAM_BASE 0x00000000
+
+#define CFG_FLASH_BASE 0xFE000000
+#define CFG_FLASH_SIZE (( uint ) ( 4 * 1024 * 1024 )) /* 4MB */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MONITOR_LEN ( 256 << 10 ) /* 256 KByte */
+#define CFG_MALLOC_LEN ( 384 << 10 ) /* 384 KByte SDRAM rsvd */
+ /* malloc() usage */
+/**
+** For booting Linux, the board info and command line data
+** have to be in the first 8 MB of memory, since this is
+** the maximum mapped by the Linux kernel during initialization.
+**/
+#define CFG_BOOTMAPSZ ( 8 << 20 ) /* Initial Memory map for Linux */
+
+/******************************************************************************
+** Flash Organization
+******************************************************************************/
+
+#define CFG_MAX_FLASH_BANKS 1 /* Max no of flash mem banks */
+#define CFG_MAX_FLASH_SECT 71 /* Max no of sec on 1 chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Erase flash timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Write flash timeout (ms) */
+
+/******************************************************************************
+** U-BOOT Environment variables in Flash
+******************************************************************************/
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x00040000
+#define CFG_ENV_SIZE 0x10000 /* 64KBytes env space */
+#define CFG_ENV_SECT_SIZE 0x10000
+
+/******************************************************************************
+** Cache Configuration
+******************************************************************************/
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if ( CONFIG_COMMANDS & CFG_CMD_KGDB )
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/******************************************************************************
+** Internal memory mapped register
+******************************************************************************/
+#define CFG_IMMR 0xFA200000
+#define CFG_IMMR_SIZE (( uint) ( 62 * 1024 )) /* 64 KByte res */
+
+/* Definitions for initial stack pointer and data area ( in DPRAM ) */
+
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* end of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64
+#define CFG_GBL_DATA_OFFSET ( CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE )
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+
+
+/* SIU Module Configuration Register */
+#define CFG_SIUMCR ( SIUMCR_AEME | SIUMCR_MLRC01 | SIUMCR_DBGC10 )
+
+/******************************************************************************
+** SYPCR - System protection and control
+** SYPCR - can be written only once after reset
+******************************************************************************/
+#if defined( CONFIG_WATCHDOG )
+#define CFG_SYPCR ( SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
+ SYPCR_SWF | SYPCR_SWE | SYPCR_SWRI | \
+ SYPCR_SWP )
+#else
+#define CFG_SYPCR ( SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | \
+ SYPCR_SWF | SYPCR_SWP )
+#endif
+
+/* TBSCR - Time Base Status and Control Register */
+#define CFG_TBSCR ( TBSCR_REFA | TBSCR_REFB | TBSCR_TBE )
+
+/* PISCR - Periodic Interrupt Status and Control */
+#define CFG_PISCR ( PISCR_PS | PISCR_PITF )
+
+/* PLPRCR - PLL, Low-Power, and Reset Control Register */
+#define CFG_PLPRCR ((( MPC8XX_FACT - 1 ) << PLPRCR_MF_SHIFT ) | \
+ PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST )
+
+/* SCCR - System Clock and reset Control Register */
+#define SCCR_MASK SCCR_EBDF11
+#define CFG_SCCR ( SCCR_TBS | SCCR_COM00 | SCCR_DFSYNC00 | \
+ SCCR_DFBRG00 | SCCR_DFNL000| SCCR_DFNH000 | \
+ SCCR_DFLCD000 | SCCR_DFALCD00 )
+#define CFG_DER 0
+
+/******************************************************************************
+** Because of the way the 860 starts up and assigns CS0 the
+** entire address space, we have to set the memory controller
+** differently. Normally, you write the option register
+** first, and then enable the chip select by writing the
+** base register. For CS0, you must write the base register
+** first, followed by the option register.
+******************************************************************************/
+/**
+ ** Memory Controller Definitions
+ ** BR0/1/2... and OR0/1/2...
+*/
+/* For AdderII BR0 FLASH */
+
+#define CFG_REMAP_OR_AM 0xFF800000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xFF800000 /* OR addr mask */
+
+/* Flash Timings: ACS = 11, TRLX = 1, CSNT = 0, SCY = 7 */
+#define CFG_OR_TIMING_FLASH ( OR_ACS_DIV2 | OR_BI | OR_SCY_7_CLK | OR_TRLX )
+
+#define CFG_OR0_REMAP ( CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH )
+
+#define CFG_OR0_PRELIM CFG_OR0_REMAP
+#define CFG_BR0_PRELIM (( CFG_FLASH_BASE & BR_BA_MSK ) | \
+ BR_PS_16 | BR_V )
+
+/* For AdderII BR1 SDRAM */
+
+#define CFG_PRELIM_OR1_AM 0xFF800000
+#define CFG_OR1_REMAP ( CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_ACS_DIV2 )
+#define CFG_OR1_PRELIM ( CFG_PRELIM_OR1_AM | OR_CSNT_SAM | OR_ACS_DIV2 )
+#define CFG_BR1_PRELIM ( CFG_SDRAM_BASE | BR_MS_UPMA | BR_V )
+
+
+/*******************************************************************************
+* Internal Definitions Boot Flags
+*******************************************************************************/
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+
+#endif
+/* __CONFIG_H */
+
puts ("FLASH: ");
if ((flash_size = flash_init ()) > 0) {
-#ifdef CFG_FLASH_CHECKSUM
+# ifdef CFG_FLASH_CHECKSUM
print_size (flash_size, "");
/*
* Compute and print flash CRC if flashchecksum is set to 'y'
);
}
putc ('\n');
-#else
+# else /* !CFG_FLASH_CHECKSUM */
print_size (flash_size, "\n");
-#endif /* CFG_FLASH_CHECKSUM */
+# endif /* CFG_FLASH_CHECKSUM */
} else {
puts (failed);
hang ();
bd->bi_flashstart = CFG_FLASH_BASE; /* update start of FLASH memory */
bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */
-#if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
+# if defined(CONFIG_PCU_E) || defined(CONFIG_OXC)
bd->bi_flashoffset = 0;
-#elif CFG_MONITOR_BASE == CFG_FLASH_BASE
+# elif CFG_MONITOR_BASE == CFG_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
-#else
+# else
bd->bi_flashoffset = 0;
-#endif
-#else
+# endif
+#else /* CFG_NO_FLASH */
bd->bi_flashsize = 0;
bd->bi_flashstart = 0;
projects / karo-tx-uboot.git / commitdiff