karo: tx6: remove duplicate setup of LCD pads

diff --git a/board/karo/tx6/tx6qdl.c b/board/karo/tx6/tx6qdl.c
index 5b95e59736e62cf890849660bddf4316099db1c5..05d359725ac903ace1c25a3ad59cd14aaa1f16ce 100644 (file)
--- a/board/karo/tx6/tx6qdl.c
+++ b/board/karo/tx6/tx6qdl.c
@@ -636,36 +636,6 @@ static const iomux_v3_cfg_t stk5_pads[] = {
        /* SW controlled LED on STK5 baseboard */
        MX6_PAD_EIM_A18__GPIO_2_20,
 
-       /* LCD data pins */
-       MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
-       MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
-       MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
-       MX6_PAD_DISP0_DAT3__IPU1_DISP0_DAT_3,
-       MX6_PAD_DISP0_DAT4__IPU1_DISP0_DAT_4,
-       MX6_PAD_DISP0_DAT5__IPU1_DISP0_DAT_5,
-       MX6_PAD_DISP0_DAT6__IPU1_DISP0_DAT_6,
-       MX6_PAD_DISP0_DAT7__IPU1_DISP0_DAT_7,
-       MX6_PAD_DISP0_DAT8__IPU1_DISP0_DAT_8,
-       MX6_PAD_DISP0_DAT9__IPU1_DISP0_DAT_9,
-       MX6_PAD_DISP0_DAT10__IPU1_DISP0_DAT_10,
-       MX6_PAD_DISP0_DAT11__IPU1_DISP0_DAT_11,
-       MX6_PAD_DISP0_DAT12__IPU1_DISP0_DAT_12,
-       MX6_PAD_DISP0_DAT13__IPU1_DISP0_DAT_13,
-       MX6_PAD_DISP0_DAT14__IPU1_DISP0_DAT_14,
-       MX6_PAD_DISP0_DAT15__IPU1_DISP0_DAT_15,
-       MX6_PAD_DISP0_DAT16__IPU1_DISP0_DAT_16,
-       MX6_PAD_DISP0_DAT17__IPU1_DISP0_DAT_17,
-       MX6_PAD_DISP0_DAT18__IPU1_DISP0_DAT_18,
-       MX6_PAD_DISP0_DAT19__IPU1_DISP0_DAT_19,
-       MX6_PAD_DISP0_DAT20__IPU1_DISP0_DAT_20,
-       MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
-       MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
-       MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
-       MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, /* HSYNC */
-       MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, /* VSYNC */
-       MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, /* OE_ACD */
-       MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* LSCLK */
-
        /* I2C bus on DIMM pins 40/41 */
        MX6_PAD_GPIO_6__I2C3_SDA,
        MX6_PAD_GPIO_3__I2C3_SCL,
@@ -934,11 +904,8 @@ static const iomux_v3_cfg_t stk5_lcd_pads[] = {
        /* LCD Backlight (PWM) */
        MX6_PAD_GPIO_1__GPIO_1_1,
 
+#ifndef CONFIG_SYS_LVDS_IF
        /* Display */
-       MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK,
-       MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
-       MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2,
-       MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3,
        MX6_PAD_DISP0_DAT0__IPU1_DISP0_DAT_0,
        MX6_PAD_DISP0_DAT1__IPU1_DISP0_DAT_1,
        MX6_PAD_DISP0_DAT2__IPU1_DISP0_DAT_2,
@@ -963,6 +930,11 @@ static const iomux_v3_cfg_t stk5_lcd_pads[] = {
        MX6_PAD_DISP0_DAT21__IPU1_DISP0_DAT_21,
        MX6_PAD_DISP0_DAT22__IPU1_DISP0_DAT_22,
        MX6_PAD_DISP0_DAT23__IPU1_DISP0_DAT_23,
+       MX6_PAD_DI0_PIN2__IPU1_DI0_PIN2, /* HSYNC */
+       MX6_PAD_DI0_PIN3__IPU1_DI0_PIN3, /* VSYNC */
+       MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15, /* OE_ACD */
+       MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK, /* LSCLK */
+#endif
 };
 
 static const struct gpio stk5_lcd_gpios[] = {