#include <pci.h>
#if 0
-#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
+#define PCNET_DEBUG_LEVEL 0 /* 0=off, 1=init, 2=rx/tx */
#endif
#if PCNET_DEBUG_LEVEL > 0
/* The PCNET Rx and Tx ring descriptors. */
struct pcnet_rx_head {
- u32 base;
- s16 buf_length;
- s16 status;
- u32 msg_length;
- u32 reserved;
+ u32 base;
+ s16 buf_length;
+ s16 status;
+ u32 msg_length;
+ u32 reserved;
};
struct pcnet_tx_head {
- u32 base;
- s16 length;
- s16 status;
- u32 misc;
- u32 reserved;
+ u32 base;
+ s16 length;
+ s16 status;
+ u32 misc;
+ u32 reserved;
};
/* The PCNET 32-Bit initialization block, described in databook. */
struct pcnet_init_block {
- u16 mode;
- u16 tlen_rlen;
- u8 phys_addr[6];
- u16 reserved;
- u32 filter[2];
- /* Receive and transmit ring base, along with extra bits. */
- u32 rx_ring;
- u32 tx_ring;
- u32 reserved2;
+ u16 mode;
+ u16 tlen_rlen;
+ u8 phys_addr[6];
+ u16 reserved;
+ u32 filter[2];
+ /* Receive and transmit ring base, along with extra bits. */
+ u32 rx_ring;
+ u32 tx_ring;
+ u32 reserved2;
};
typedef struct pcnet_priv {
- struct pcnet_rx_head rx_ring[RX_RING_SIZE];
- struct pcnet_tx_head tx_ring[TX_RING_SIZE];
- struct pcnet_init_block init_block;
- /* Receive Buffer space */
- unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
- int cur_rx;
- int cur_tx;
+ struct pcnet_rx_head rx_ring[RX_RING_SIZE];
+ struct pcnet_tx_head tx_ring[TX_RING_SIZE];
+ struct pcnet_init_block init_block;
+ /* Receive Buffer space */
+ unsigned char rx_buf[RX_RING_SIZE][PKT_BUF_SZ + 4];
+ int cur_rx;
+ int cur_tx;
} pcnet_priv_t;
static pcnet_priv_t *lp;
static u16 pcnet_read_csr (struct eth_device *dev, int index)
{
- outw (index, dev->iobase+PCNET_RAP);
- return inw (dev->iobase+PCNET_RDP);
+ outw (index, dev->iobase + PCNET_RAP);
+ return inw (dev->iobase + PCNET_RDP);
}
static void pcnet_write_csr (struct eth_device *dev, int index, u16 val)
{
- outw (index, dev->iobase+PCNET_RAP);
- outw (val, dev->iobase+PCNET_RDP);
+ outw (index, dev->iobase + PCNET_RAP);
+ outw (val, dev->iobase + PCNET_RDP);
}
static u16 pcnet_read_bcr (struct eth_device *dev, int index)
{
- outw (index, dev->iobase+PCNET_RAP);
- return inw (dev->iobase+PCNET_BDP);
+ outw (index, dev->iobase + PCNET_RAP);
+ return inw (dev->iobase + PCNET_BDP);
}
static void pcnet_write_bcr (struct eth_device *dev, int index, u16 val)
{
- outw (index, dev->iobase+PCNET_RAP);
- outw (val, dev->iobase+PCNET_BDP);
+ outw (index, dev->iobase + PCNET_RAP);
+ outw (val, dev->iobase + PCNET_BDP);
}
static void pcnet_reset (struct eth_device *dev)
{
- inw (dev->iobase+PCNET_RESET);
+ inw (dev->iobase + PCNET_RESET);
}
static int pcnet_check (struct eth_device *dev)
{
- outw (88, dev->iobase+PCNET_RAP);
- return (inw (dev->iobase+PCNET_RAP) == 88);
+ outw (88, dev->iobase + PCNET_RAP);
+ return (inw (dev->iobase + PCNET_RAP) == 88);
}
-static int pcnet_init( struct eth_device* dev, bd_t *bis);
-static int pcnet_send (struct eth_device* dev, volatile void *packet,
- int length);
-static int pcnet_recv (struct eth_device* dev);
-static void pcnet_halt (struct eth_device* dev);
-static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_num);
+static int pcnet_init (struct eth_device *dev, bd_t * bis);
+static int pcnet_send (struct eth_device *dev, volatile void *packet,
+ int length);
+static int pcnet_recv (struct eth_device *dev);
+static void pcnet_halt (struct eth_device *dev);
+static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_num);
#define PCI_TO_MEM(d,a) pci_phys_to_mem((pci_dev_t)d->priv, (u_long)(a))
#define PCI_TO_MEM_LE(d,a) (u32)(cpu_to_le32(PCI_TO_MEM(d,a)))
static struct pci_device_id supported[] = {
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE },
- { }
+ {PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_LANCE},
+ {}
};
-int pcnet_initialize(bd_t *bis)
+int pcnet_initialize (bd_t * bis)
{
- pci_dev_t devbusfn;
- struct eth_device* dev;
- u16 command, status;
- int dev_nr = 0;
-
- PCNET_DEBUG1("\npcnet_initialize...\n");
-
- for (dev_nr = 0; ; dev_nr++) {
-
- /*
- * Find the PCnet PCI device(s).
- */
- if ((devbusfn = pci_find_devices(supported, dev_nr)) < 0) {
- break;
+ pci_dev_t devbusfn;
+ struct eth_device *dev;
+ u16 command, status;
+ int dev_nr = 0;
+
+ PCNET_DEBUG1 ("\npcnet_initialize...\n");
+
+ for (dev_nr = 0;; dev_nr++) {
+
+ /*
+ * Find the PCnet PCI device(s).
+ */
+ if ((devbusfn = pci_find_devices (supported, dev_nr)) < 0) {
+ break;
+ }
+
+ /*
+ * Allocate and pre-fill the device structure.
+ */
+ dev = (struct eth_device *) malloc (sizeof *dev);
+ dev->priv = (void *) devbusfn;
+ sprintf (dev->name, "pcnet#%d", dev_nr);
+
+ /*
+ * Setup the PCI device.
+ */
+ pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0,
+ (unsigned int *) &dev->iobase);
+ dev->iobase &= ~0xf;
+
+ PCNET_DEBUG1 ("%s: devbusfn=0x%x iobase=0x%x: ",
+ dev->name, devbusfn, dev->iobase);
+
+ command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
+ pci_write_config_word (devbusfn, PCI_COMMAND, command);
+ pci_read_config_word (devbusfn, PCI_COMMAND, &status);
+ if ((status & command) != command) {
+ printf ("%s: Couldn't enable IO access or Bus Mastering\n", dev->name);
+ free (dev);
+ continue;
+ }
+
+ pci_write_config_byte (devbusfn, PCI_LATENCY_TIMER, 0x40);
+
+ /*
+ * Probe the PCnet chip.
+ */
+ if (pcnet_probe (dev, bis, dev_nr) < 0) {
+ free (dev);
+ continue;
+ }
+
+ /*
+ * Setup device structure and register the driver.
+ */
+ dev->init = pcnet_init;
+ dev->halt = pcnet_halt;
+ dev->send = pcnet_send;
+ dev->recv = pcnet_recv;
+
+ eth_register (dev);
}
- /*
- * Allocate and pre-fill the device structure.
- */
- dev = (struct eth_device*) malloc(sizeof *dev);
- dev->priv = (void *)devbusfn;
- sprintf(dev->name, "pcnet#%d", dev_nr);
-
- /*
- * Setup the PCI device.
- */
- pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, (unsigned int *)&dev->iobase);
- dev->iobase &= ~0xf;
-
- PCNET_DEBUG1("%s: devbusfn=0x%x iobase=0x%x: ",
- dev->name, devbusfn, dev->iobase);
-
- command = PCI_COMMAND_IO | PCI_COMMAND_MASTER;
- pci_write_config_word(devbusfn, PCI_COMMAND, command);
- pci_read_config_word(devbusfn, PCI_COMMAND, &status);
- if ((status & command) != command) {
- printf("%s: Couldn't enable IO access or Bus Mastering\n",
- dev->name);
- free(dev);
- continue;
- }
-
- pci_write_config_byte(devbusfn, PCI_LATENCY_TIMER, 0x40);
-
- /*
- * Probe the PCnet chip.
- */
- if (pcnet_probe(dev, bis, dev_nr) < 0) {
- free(dev);
- continue;
- }
-
- /*
- * Setup device structure and register the driver.
- */
- dev->init = pcnet_init;
- dev->halt = pcnet_halt;
- dev->send = pcnet_send;
- dev->recv = pcnet_recv;
-
- eth_register(dev);
- }
-
- udelay(10 * 1000);
+ udelay (10 * 1000);
- return dev_nr;
+ return dev_nr;
}
-static int pcnet_probe(struct eth_device* dev, bd_t *bis, int dev_nr)
+static int pcnet_probe (struct eth_device *dev, bd_t * bis, int dev_nr)
{
- int chip_version;
- char *chipname;
+ int chip_version;
+ char *chipname;
+
#ifdef PCNET_HAS_PROM
- int i;
+ int i;
#endif
- /* Reset the PCnet controller */
- pcnet_reset(dev);
-
- /* Check if register access is working */
- if (pcnet_read_csr(dev, 0) != 4 || !pcnet_check(dev)) {
- printf("%s: CSR register access check failed\n", dev->name);
- return -1;
- }
-
- /* Identify the chip */
- chip_version = pcnet_read_csr(dev, 88) | (pcnet_read_csr(dev,89) << 16);
- if ((chip_version & 0xfff) != 0x003)
- return -1;
- chip_version = (chip_version >> 12) & 0xffff;
- switch (chip_version) {
- case 0x2621:
- chipname = "PCnet/PCI II 79C970A"; /* PCI */
- break;
+ /* Reset the PCnet controller */
+ pcnet_reset (dev);
+
+ /* Check if register access is working */
+ if (pcnet_read_csr (dev, 0) != 4 || !pcnet_check (dev)) {
+ printf ("%s: CSR register access check failed\n", dev->name);
+ return -1;
+ }
+
+ /* Identify the chip */
+ chip_version =
+ pcnet_read_csr (dev, 88) | (pcnet_read_csr (dev, 89) << 16);
+ if ((chip_version & 0xfff) != 0x003)
+ return -1;
+ chip_version = (chip_version >> 12) & 0xffff;
+ switch (chip_version) {
+ case 0x2621:
+ chipname = "PCnet/PCI II 79C970A"; /* PCI */
+ break;
#ifdef CONFIG_PCNET_79C973
- case 0x2625:
- chipname = "PCnet/FAST III 79C973"; /* PCI */
- break;
+ case 0x2625:
+ chipname = "PCnet/FAST III 79C973"; /* PCI */
+ break;
#endif
#ifdef CONFIG_PCNET_79C975
- case 0x2627:
- chipname = "PCnet/FAST III 79C975"; /* PCI */
- break;
+ case 0x2627:
+ chipname = "PCnet/FAST III 79C975"; /* PCI */
+ break;
#endif
- default:
- printf("%s: PCnet version %#x not supported\n",
- dev->name, chip_version);
- return -1;
- }
+ default:
+ printf ("%s: PCnet version %#x not supported\n",
+ dev->name, chip_version);
+ return -1;
+ }
- PCNET_DEBUG1("AMD %s\n", chipname);
+ PCNET_DEBUG1 ("AMD %s\n", chipname);
#ifdef PCNET_HAS_PROM
- /*
- * In most chips, after a chip reset, the ethernet address is read from
- * the station address PROM at the base address and programmed into the
- * "Physical Address Registers" CSR12-14.
- */
- for (i = 0; i < 3; i++) {
- unsigned int val;
- val = pcnet_read_csr(dev, i+12) & 0x0ffff;
- /* There may be endianness issues here. */
- dev->enetaddr[2*i ] = val & 0x0ff;
- dev->enetaddr[2*i+1] = (val >> 8) & 0x0ff;
- }
+ /*
+ * In most chips, after a chip reset, the ethernet address is read from
+ * the station address PROM at the base address and programmed into the
+ * "Physical Address Registers" CSR12-14.
+ */
+ for (i = 0; i < 3; i++) {
+ unsigned int val;
+
+ val = pcnet_read_csr (dev, i + 12) & 0x0ffff;
+ /* There may be endianness issues here. */
+ dev->enetaddr[2 * i] = val & 0x0ff;
+ dev->enetaddr[2 * i + 1] = (val >> 8) & 0x0ff;
+ }
#endif /* PCNET_HAS_PROM */
- return 0;
+ return 0;
}
-static int pcnet_init(struct eth_device* dev, bd_t *bis)
+static int pcnet_init (struct eth_device *dev, bd_t * bis)
{
- int i, val;
- u32 addr;
+ int i, val;
+ u32 addr;
- PCNET_DEBUG1("%s: pcnet_init...\n", dev->name);
+ PCNET_DEBUG1 ("%s: pcnet_init...\n", dev->name);
- /* Switch pcnet to 32bit mode */
- pcnet_write_bcr (dev, 20, 2);
+ /* Switch pcnet to 32bit mode */
+ pcnet_write_bcr (dev, 20, 2);
#ifdef CONFIG_PN62
- /* Setup LED registers */
- val = pcnet_read_bcr (dev, 2) | 0x1000;
- pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
- pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
- pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
- pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
- pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
+ /* Setup LED registers */
+ val = pcnet_read_bcr (dev, 2) | 0x1000;
+ pcnet_write_bcr (dev, 2, val); /* enable LEDPE */
+ pcnet_write_bcr (dev, 4, 0x5080); /* 100MBit */
+ pcnet_write_bcr (dev, 5, 0x40c0); /* LNKSE */
+ pcnet_write_bcr (dev, 6, 0x4090); /* TX Activity */
+ pcnet_write_bcr (dev, 7, 0x4084); /* RX Activity */
#endif
- /* Set/reset autoselect bit */
- val = pcnet_read_bcr (dev, 2) & ~2;
- val |= 2;
- pcnet_write_bcr (dev, 2, val);
-
- /* Enable auto negotiate, setup, disable fd */
- val = pcnet_read_bcr(dev, 32) & ~0x98;
- val |= 0x20;
- pcnet_write_bcr(dev, 32, val);
-
- /*
- * We only maintain one structure because the drivers will never
- * be used concurrently. In 32bit mode the RX and TX ring entries
- * must be aligned on 16-byte boundaries.
- */
- if (lp == NULL) {
- addr = (u32)malloc(sizeof(pcnet_priv_t) + 0x10);
- addr = (addr + 0xf) & ~0xf;
- lp = (pcnet_priv_t *)addr;
- }
-
- lp->init_block.mode = cpu_to_le16(0x0000);
- lp->init_block.filter[0] = 0x00000000;
- lp->init_block.filter[1] = 0x00000000;
-
- /*
- * Initialize the Rx ring.
- */
- lp->cur_rx = 0;
- for (i = 0; i < RX_RING_SIZE; i++) {
- lp->rx_ring[i].base = PCI_TO_MEM_LE(dev, lp->rx_buf[i]);
- lp->rx_ring[i].buf_length = cpu_to_le16(-PKT_BUF_SZ);
- lp->rx_ring[i].status = cpu_to_le16(0x8000);
- PCNET_DEBUG1("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n",
- i, lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
- lp->rx_ring[i].status);
- }
-
- /*
- * Initialize the Tx ring. The Tx buffer address is filled in as
- * needed, but we do need to clear the upper ownership bit.
- */
- lp->cur_tx = 0;
- for (i = 0; i < TX_RING_SIZE; i++) {
- lp->tx_ring[i].base = 0;
- lp->tx_ring[i].status = 0;
- }
-
- /*
- * Setup Init Block.
- */
- PCNET_DEBUG1("Init block at 0x%p: MAC", &lp->init_block);
-
- for (i = 0; i < 6; i++) {
- lp->init_block.phys_addr[i] = dev->enetaddr[i];
- PCNET_DEBUG1(" %02x", lp->init_block.phys_addr[i]);
- }
-
- lp->init_block.tlen_rlen = cpu_to_le16(TX_RING_LEN_BITS |
- RX_RING_LEN_BITS);
- lp->init_block.rx_ring = PCI_TO_MEM_LE(dev, lp->rx_ring);
- lp->init_block.tx_ring = PCI_TO_MEM_LE(dev, lp->tx_ring);
-
- PCNET_DEBUG1("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
- lp->init_block.tlen_rlen,
- lp->init_block.rx_ring, lp->init_block.tx_ring);
-
- /*
- * Tell the controller where the Init Block is located.
- */
- addr = PCI_TO_MEM(dev, &lp->init_block);
- pcnet_write_csr(dev, 1, addr & 0xffff);
- pcnet_write_csr(dev, 2, (addr >> 16) & 0xffff);
-
- pcnet_write_csr (dev, 4, 0x0915);
- pcnet_write_csr (dev, 0, 0x0001); /* start */
-
- /* Wait for Init Done bit */
- for (i = 10000; i > 0; i--) {
- if (pcnet_read_csr (dev, 0) & 0x0100)
- break;
- udelay(10);
- }
- if (i <= 0) {
- printf("%s: TIMEOUT: controller init failed\n", dev->name);
- pcnet_reset (dev);
- return -1;
- }
+ /* Set/reset autoselect bit */
+ val = pcnet_read_bcr (dev, 2) & ~2;
+ val |= 2;
+ pcnet_write_bcr (dev, 2, val);
- /*
- * Finally start network controller operation.
- */
- pcnet_write_csr (dev, 0, 0x0002);
+ /* Enable auto negotiate, setup, disable fd */
+ val = pcnet_read_bcr (dev, 32) & ~0x98;
+ val |= 0x20;
+ pcnet_write_bcr (dev, 32, val);
- return 0;
-}
+ /*
+ * We only maintain one structure because the drivers will never
+ * be used concurrently. In 32bit mode the RX and TX ring entries
+ * must be aligned on 16-byte boundaries.
+ */
+ if (lp == NULL) {
+ addr = (u32) malloc (sizeof (pcnet_priv_t) + 0x10);
+ addr = (addr + 0xf) & ~0xf;
+ lp = (pcnet_priv_t *) addr;
+ }
-static int pcnet_send(struct eth_device* dev, volatile void *packet, int pkt_len)
-{
- int i, status;
- struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
-
- PCNET_DEBUG2("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len, packet);
-
- /* Wait for completion by testing the OWN bit */
- for (i = 1000; i > 0; i--) {
- status = le16_to_cpu(entry->status);
- if ((status & 0x8000) == 0)
- break;
- udelay(100);
- PCNET_DEBUG2(".");
- }
- if (i <= 0) {
- printf("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
- dev->name, lp->cur_tx, status);
- pkt_len = 0;
- goto failure;
- }
-
- /*
- * Setup Tx ring. Caution: the write order is important here,
- * set the status with the "ownership" bits last.
- */
- status = 0x8300;
- entry->length = le16_to_cpu(-pkt_len);
- entry->misc = 0x00000000;
- entry->base = PCI_TO_MEM_LE(dev, packet);
- entry->status = le16_to_cpu(status);
-
- /* Trigger an immediate send poll. */
- pcnet_write_csr (dev, 0, 0x0008);
-
- failure:
- if (++lp->cur_tx >= TX_RING_SIZE)
+ lp->init_block.mode = cpu_to_le16 (0x0000);
+ lp->init_block.filter[0] = 0x00000000;
+ lp->init_block.filter[1] = 0x00000000;
+
+ /*
+ * Initialize the Rx ring.
+ */
+ lp->cur_rx = 0;
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ lp->rx_ring[i].base = PCI_TO_MEM_LE (dev, lp->rx_buf[i]);
+ lp->rx_ring[i].buf_length = cpu_to_le16 (-PKT_BUF_SZ);
+ lp->rx_ring[i].status = cpu_to_le16 (0x8000);
+ PCNET_DEBUG1
+ ("Rx%d: base=0x%x buf_length=0x%hx status=0x%hx\n", i,
+ lp->rx_ring[i].base, lp->rx_ring[i].buf_length,
+ lp->rx_ring[i].status);
+ }
+
+ /*
+ * Initialize the Tx ring. The Tx buffer address is filled in as
+ * needed, but we do need to clear the upper ownership bit.
+ */
lp->cur_tx = 0;
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ lp->tx_ring[i].base = 0;
+ lp->tx_ring[i].status = 0;
+ }
- PCNET_DEBUG2("done\n");
- return pkt_len;
-}
+ /*
+ * Setup Init Block.
+ */
+ PCNET_DEBUG1 ("Init block at 0x%p: MAC", &lp->init_block);
-static int pcnet_recv(struct eth_device* dev)
-{
- struct pcnet_rx_head *entry;
- int pkt_len = 0;
- u16 status;
+ for (i = 0; i < 6; i++) {
+ lp->init_block.phys_addr[i] = dev->enetaddr[i];
+ PCNET_DEBUG1 (" %02x", lp->init_block.phys_addr[i]);
+ }
+
+ lp->init_block.tlen_rlen = cpu_to_le16 (TX_RING_LEN_BITS |
+ RX_RING_LEN_BITS);
+ lp->init_block.rx_ring = PCI_TO_MEM_LE (dev, lp->rx_ring);
+ lp->init_block.tx_ring = PCI_TO_MEM_LE (dev, lp->tx_ring);
+
+ PCNET_DEBUG1 ("\ntlen_rlen=0x%x rx_ring=0x%x tx_ring=0x%x\n",
+ lp->init_block.tlen_rlen,
+ lp->init_block.rx_ring, lp->init_block.tx_ring);
- while (1) {
- entry = &lp->rx_ring[lp->cur_rx];
/*
- * If we own the next entry, it's a new packet. Send it up.
+ * Tell the controller where the Init Block is located.
*/
- if (((status = le16_to_cpu(entry->status)) & 0x8000) != 0) {
- break;
+ addr = PCI_TO_MEM (dev, &lp->init_block);
+ pcnet_write_csr (dev, 1, addr & 0xffff);
+ pcnet_write_csr (dev, 2, (addr >> 16) & 0xffff);
+
+ pcnet_write_csr (dev, 4, 0x0915);
+ pcnet_write_csr (dev, 0, 0x0001); /* start */
+
+ /* Wait for Init Done bit */
+ for (i = 10000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x0100)
+ break;
+ udelay (10);
}
- status >>= 8;
-
- if (status != 0x03) { /* There was an error. */
-
- printf("%s: Rx%d", dev->name, lp->cur_rx);
- PCNET_DEBUG1(" (status=0x%x)", status);
- if (status & 0x20) printf(" Frame");
- if (status & 0x10) printf(" Overflow");
- if (status & 0x08) printf(" CRC");
- if (status & 0x04) printf(" Fifo");
- printf(" Error\n");
- entry->status &= le16_to_cpu(0x03ff);
-
- } else {
-
- pkt_len = (le32_to_cpu(entry->msg_length) & 0xfff) - 4;
- if (pkt_len < 60) {
- printf("%s: Rx%d: invalid packet length %d\n",
- dev->name, lp->cur_rx, pkt_len);
- } else {
- NetReceive(lp->rx_buf[lp->cur_rx], pkt_len);
- PCNET_DEBUG2("Rx%d: %d bytes from 0x%p\n",
- lp->cur_rx, pkt_len, lp->rx_buf[lp->cur_rx]);
- }
+ if (i <= 0) {
+ printf ("%s: TIMEOUT: controller init failed\n", dev->name);
+ pcnet_reset (dev);
+ return -1;
}
- entry->status |= cpu_to_le16(0x8000);
- if (++lp->cur_rx >= RX_RING_SIZE)
- lp->cur_rx = 0;
- }
- return pkt_len;
+ /*
+ * Finally start network controller operation.
+ */
+ pcnet_write_csr (dev, 0, 0x0002);
+
+ return 0;
}
-static void pcnet_halt(struct eth_device* dev)
+static int pcnet_send (struct eth_device *dev, volatile void *packet,
+ int pkt_len)
{
- int i;
-
- PCNET_DEBUG1("%s: pcnet_halt...\n", dev->name);
-
- /* Reset the PCnet controller */
- pcnet_reset (dev);
-
- /* Wait for Stop bit */
- for (i = 1000; i > 0; i--) {
- if (pcnet_read_csr (dev, 0) & 0x4)
- break;
- udelay(10);
- }
- if (i <= 0) {
- printf("%s: TIMEOUT: controller reset failed\n", dev->name);
- }
+ int i, status;
+ struct pcnet_tx_head *entry = &lp->tx_ring[lp->cur_tx];
+
+ PCNET_DEBUG2 ("Tx%d: %d bytes from 0x%p ", lp->cur_tx, pkt_len,
+ packet);
+
+ /* Wait for completion by testing the OWN bit */
+ for (i = 1000; i > 0; i--) {
+ status = le16_to_cpu (entry->status);
+ if ((status & 0x8000) == 0)
+ break;
+ udelay (100);
+ PCNET_DEBUG2 (".");
+ }
+ if (i <= 0) {
+ printf ("%s: TIMEOUT: Tx%d failed (status = 0x%x)\n",
+ dev->name, lp->cur_tx, status);
+ pkt_len = 0;
+ goto failure;
+ }
+
+ /*
+ * Setup Tx ring. Caution: the write order is important here,
+ * set the status with the "ownership" bits last.
+ */
+ status = 0x8300;
+ entry->length = le16_to_cpu (-pkt_len);
+ entry->misc = 0x00000000;
+ entry->base = PCI_TO_MEM_LE (dev, packet);
+ entry->status = le16_to_cpu (status);
+
+ /* Trigger an immediate send poll. */
+ pcnet_write_csr (dev, 0, 0x0008);
+
+ failure:
+ if (++lp->cur_tx >= TX_RING_SIZE)
+ lp->cur_tx = 0;
+
+ PCNET_DEBUG2 ("done\n");
+ return pkt_len;
+}
+
+static int pcnet_recv (struct eth_device *dev)
+{
+ struct pcnet_rx_head *entry;
+ int pkt_len = 0;
+ u16 status;
+
+ while (1) {
+ entry = &lp->rx_ring[lp->cur_rx];
+ /*
+ * If we own the next entry, it's a new packet. Send it up.
+ */
+ if (((status = le16_to_cpu (entry->status)) & 0x8000) != 0) {
+ break;
+ }
+ status >>= 8;
+
+ if (status != 0x03) { /* There was an error. */
+
+ printf ("%s: Rx%d", dev->name, lp->cur_rx);
+ PCNET_DEBUG1 (" (status=0x%x)", status);
+ if (status & 0x20)
+ printf (" Frame");
+ if (status & 0x10)
+ printf (" Overflow");
+ if (status & 0x08)
+ printf (" CRC");
+ if (status & 0x04)
+ printf (" Fifo");
+ printf (" Error\n");
+ entry->status &= le16_to_cpu (0x03ff);
+
+ } else {
+
+ pkt_len =
+ (le32_to_cpu (entry->msg_length) & 0xfff) - 4;
+ if (pkt_len < 60) {
+ printf ("%s: Rx%d: invalid packet length %d\n", dev->name, lp->cur_rx, pkt_len);
+ } else {
+ NetReceive (lp->rx_buf[lp->cur_rx], pkt_len);
+ PCNET_DEBUG2 ("Rx%d: %d bytes from 0x%p\n",
+ lp->cur_rx, pkt_len,
+ lp->rx_buf[lp->cur_rx]);
+ }
+ }
+ entry->status |= cpu_to_le16 (0x8000);
+
+ if (++lp->cur_rx >= RX_RING_SIZE)
+ lp->cur_rx = 0;
+ }
+ return pkt_len;
}
+static void pcnet_halt (struct eth_device *dev)
+{
+ int i;
+
+ PCNET_DEBUG1 ("%s: pcnet_halt...\n", dev->name);
+
+ /* Reset the PCnet controller */
+ pcnet_reset (dev);
+
+ /* Wait for Stop bit */
+ for (i = 1000; i > 0; i--) {
+ if (pcnet_read_csr (dev, 0) & 0x4)
+ break;
+ udelay (10);
+ }
+ if (i <= 0) {
+ printf ("%s: TIMEOUT: controller reset failed\n", dev->name);
+ }
+}
#endif
projects / karo-tx-uboot.git / commitdiff