* MA 02111-1307 USA
*/
-#include <malloc.h>
-#include "tpm.h"
+#include <config.h>
+#include <common.h>
+#include <compiler.h>
+#include <fdtdec.h>
+#include <i2c.h>
+#include <tpm.h>
+#include <asm-generic/errno.h>
+#include <linux/types.h>
+#include <linux/unaligned/be_byteshift.h>
-/* global structure for tpm chip data */
-struct tpm_chip g_chip;
+#include "tpm_private.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* TPM configuration */
+struct tpm {
+ int i2c_bus;
+ int slave_addr;
+ char inited;
+ int old_bus;
+} tpm;
+
+/* Global structure for tpm chip data */
+static struct tpm_chip g_chip;
enum tpm_duration {
TPM_SHORT = 0,
TPM_UNDEFINED,
};
-#define TPM_MAX_ORDINAL 243
-#define TPM_MAX_PROTECTED_ORDINAL 12
-#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+/* Extended error numbers from linux (see errno.h) */
+#define ECANCELED 125 /* Operation Canceled */
+
+/* Timer frequency. Corresponds to msec timer resolution*/
+#define HZ 1000
+
+#define TPM_MAX_ORDINAL 243
+#define TPM_MAX_PROTECTED_ORDINAL 12
+#define TPM_PROTECTED_ORDINAL_MASK 0xFF
+
+#define TPM_CMD_COUNT_BYTE 2
+#define TPM_CMD_ORDINAL_BYTE 6
/*
* Array with one entry per ordinal defining the maximum amount
TPM_MEDIUM,
};
-/*
- * Returns max number of milliseconds to wait
- */
-unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip, u32 ordinal)
+/* Returns max number of milliseconds to wait */
+static unsigned long tpm_calc_ordinal_duration(struct tpm_chip *chip,
+ u32 ordinal)
{
int duration_idx = TPM_UNDEFINED;
int duration = 0;
- if (ordinal < TPM_MAX_ORDINAL)
+ if (ordinal < TPM_MAX_ORDINAL) {
duration_idx = tpm_ordinal_duration[ordinal];
- else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
- TPM_MAX_PROTECTED_ORDINAL)
- duration_idx =
- tpm_protected_ordinal_duration[ordinal &
- TPM_PROTECTED_ORDINAL_MASK];
+ } else if ((ordinal & TPM_PROTECTED_ORDINAL_MASK) <
+ TPM_MAX_PROTECTED_ORDINAL) {
+ duration_idx = tpm_protected_ordinal_duration[
+ ordinal & TPM_PROTECTED_ORDINAL_MASK];
+ }
if (duration_idx != TPM_UNDEFINED)
duration = chip->vendor.duration[duration_idx];
+
if (duration <= 0)
- return 2 * 60 * HZ; /*two minutes timeout*/
+ return 2 * 60 * HZ; /* Two minutes timeout */
else
return duration;
}
-#define TPM_CMD_COUNT_BYTE 2
-#define TPM_CMD_ORDINAL_BYTE 6
-
-ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz)
+static ssize_t tpm_transmit(const unsigned char *buf, size_t bufsiz)
{
ssize_t rc;
u32 count, ordinal;
ordinal = get_unaligned_be32(buf + TPM_CMD_ORDINAL_BYTE);
if (count == 0) {
- dev_err(chip->dev, "no data\n");
+ error("no data\n");
return -ENODATA;
}
if (count > bufsiz) {
- dev_err(chip->dev,
- "invalid count value %x %zx\n", count, bufsiz);
+ error("invalid count value %x %zx\n", count, bufsiz);
return -E2BIG;
}
rc = chip->vendor.send(chip, (u8 *)buf, count);
if (rc < 0) {
- dev_err(chip->dev, "tpm_transmit: tpm_send: error %zd\n", rc);
+ error("tpm_transmit: tpm_send: error %zd\n", rc);
goto out;
}
start = get_timer(0);
stop = tpm_calc_ordinal_duration(chip, ordinal);
do {
- dbg_printf("waiting for status...\n");
+ debug("waiting for status...\n");
u8 status = chip->vendor.status(chip);
if ((status & chip->vendor.req_complete_mask) ==
chip->vendor.req_complete_val) {
- dbg_printf("...got it;\n");
+ debug("...got it;\n");
goto out_recv;
}
if ((status == chip->vendor.req_canceled)) {
- dev_err(chip->dev, "Operation Canceled\n");
+ error("Operation Canceled\n");
rc = -ECANCELED;
goto out;
}
- msleep(TPM_TIMEOUT);
+ udelay(TPM_TIMEOUT * 1000);
} while (get_timer(start) < stop);
chip->vendor.cancel(chip);
- dev_err(chip->dev, "Operation Timed out\n");
+ error("Operation Timed out\n");
rc = -ETIME;
goto out;
out_recv:
-
- dbg_printf("out_recv: reading response...\n");
+ debug("out_recv: reading response...\n");
rc = chip->vendor.recv(chip, (u8 *)buf, TPM_BUFSIZE);
if (rc < 0)
- dev_err(chip->dev, "tpm_transmit: tpm_recv: error %zd\n", rc);
+ error("tpm_transmit: tpm_recv: error %zd\n", rc);
+
out:
return rc;
}
-#define TPM_ERROR_SIZE 10
+static int tpm_open(uint32_t dev_addr)
+{
+ int rc;
+ if (g_chip.is_open)
+ return -EBUSY;
+ rc = tpm_vendor_init(dev_addr);
+ if (rc < 0)
+ g_chip.is_open = 0;
+ return rc;
+}
-enum tpm_capabilities {
- TPM_CAP_PROP = cpu_to_be32(5),
-};
+static void tpm_close(void)
+{
+ if (g_chip.is_open) {
+ tpm_vendor_cleanup(&g_chip);
+ g_chip.is_open = 0;
+ }
+}
-enum tpm_sub_capabilities {
- TPM_CAP_PROP_TIS_TIMEOUT = cpu_to_be32(0x115),
- TPM_CAP_PROP_TIS_DURATION = cpu_to_be32(0x120),
-};
+static int tpm_select(void)
+{
+ int ret;
+
+ tpm.old_bus = i2c_get_bus_num();
+ if (tpm.old_bus != tpm.i2c_bus) {
+ ret = i2c_set_bus_num(tpm.i2c_bus);
+ if (ret) {
+ debug("%s: Fail to set i2c bus %d\n", __func__,
+ tpm.i2c_bus);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static int tpm_deselect(void)
+{
+ int ret;
+
+ if (tpm.old_bus != i2c_get_bus_num()) {
+ ret = i2c_set_bus_num(tpm.old_bus);
+ if (ret) {
+ debug("%s: Fail to restore i2c bus %d\n",
+ __func__, tpm.old_bus);
+ return -1;
+ }
+ }
+ tpm.old_bus = -1;
+ return 0;
+}
+
+/**
+ * Decode TPM configuration.
+ *
+ * @param dev Returns a configuration of TPM device
+ * @return 0 if ok, -1 on error
+ */
+static int tpm_decode_config(struct tpm *dev)
+{
+#ifdef CONFIG_OF_CONTROL
+ const void *blob = gd->fdt_blob;
+ int node, parent;
+ int i2c_bus;
+
+ node = fdtdec_next_compatible(blob, 0, COMPAT_INFINEON_SLB9635_TPM);
+ if (node < 0) {
+ node = fdtdec_next_compatible(blob, 0,
+ COMPAT_INFINEON_SLB9645_TPM);
+ }
+ if (node < 0) {
+ debug("%s: Node not found\n", __func__);
+ return -1;
+ }
+ parent = fdt_parent_offset(blob, node);
+ if (parent < 0) {
+ debug("%s: Cannot find node parent\n", __func__);
+ return -1;
+ }
+ i2c_bus = i2c_get_bus_num_fdt(parent);
+ if (i2c_bus < 0)
+ return -1;
+ dev->i2c_bus = i2c_bus;
+ dev->slave_addr = fdtdec_get_addr(blob, node, "reg");
+#else
+ dev->i2c_bus = CONFIG_TPM_TIS_I2C_BUS_NUMBER;
+ dev->slave_addr = CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS;
+#endif
+ return 0;
+}
struct tpm_chip *tpm_register_hardware(const struct tpm_vendor_specific *entry)
{
return chip;
}
-int tpm_open(uint32_t dev_addr)
+int tis_init(void)
+{
+ if (tpm.inited)
+ return 0;
+
+ if (tpm_decode_config(&tpm))
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ /*
+ * Probe TPM twice; the first probing might fail because TPM is asleep,
+ * and the probing can wake up TPM.
+ */
+ if (i2c_probe(tpm.slave_addr) && i2c_probe(tpm.slave_addr)) {
+ debug("%s: fail to probe i2c addr 0x%x\n", __func__,
+ tpm.slave_addr);
+ return -1;
+ }
+
+ tpm_deselect();
+
+ tpm.inited = 1;
+
+ return 0;
+}
+
+int tis_open(void)
{
int rc;
- if (g_chip.is_open)
- return -EBUSY;
- rc = tpm_vendor_init(dev_addr);
- if (rc < 0)
- g_chip.is_open = 0;
+
+ if (!tpm.inited)
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ rc = tpm_open(tpm.slave_addr);
+
+ tpm_deselect();
+
return rc;
}
-void tpm_close(void)
+int tis_close(void)
{
- if (g_chip.is_open) {
- tpm_vendor_cleanup(&g_chip);
- g_chip.is_open = 0;
+ if (!tpm.inited)
+ return -1;
+
+ if (tpm_select())
+ return -1;
+
+ tpm_close();
+
+ tpm_deselect();
+
+ return 0;
+}
+
+int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size,
+ uint8_t *recvbuf, size_t *rbuf_len)
+{
+ int len;
+ uint8_t buf[4096];
+
+ if (!tpm.inited)
+ return -1;
+
+ if (sizeof(buf) < sbuf_size)
+ return -1;
+
+ memcpy(buf, sendbuf, sbuf_size);
+
+ if (tpm_select())
+ return -1;
+
+ len = tpm_transmit(buf, sbuf_size);
+
+ tpm_deselect();
+
+ if (len < 10) {
+ *rbuf_len = 0;
+ return -1;
}
+
+ memcpy(recvbuf, buf, len);
+ *rbuf_len = len;
+
+ return 0;
}
#include <common.h>
#include <fdtdec.h>
+#include <compiler.h>
#include <i2c.h>
+#include <tpm.h>
+#include <asm-generic/errno.h>
#include <linux/types.h>
+#include <linux/unaligned/be_byteshift.h>
-#include "compatibility.h"
-#include "tpm.h"
+#include "tpm_private.h"
DECLARE_GLOBAL_DATA_PTR;
-/* max. buffer size supported by our tpm */
-#ifdef TPM_BUFSIZE
-#undef TPM_BUFSIZE
-#endif
-#define TPM_BUFSIZE 1260
/* Address of the TPM on the I2C bus */
-#define TPM_I2C_ADDR 0x20
-/* max. number of iterations after i2c NAK */
-#define MAX_COUNT 3
+#define TPM_I2C_ADDR 0x20
+
+/* Max buffer size supported by our tpm */
+#define TPM_DEV_BUFSIZE 1260
-#define SLEEP_DURATION 60 /*in usec*/
+/* Max number of iterations after i2c NAK */
+#define MAX_COUNT 3
-/* max. number of iterations after i2c NAK for 'long' commands
- * we need this especially for sending TPM_READY, since the cleanup after the
+/*
+ * Max number of iterations after i2c NAK for 'long' commands
+ *
+ * We need this especially for sending TPM_READY, since the cleanup after the
* transtion to the ready state may take some time, but it is unpredictable
* how long it will take.
*/
-#define MAX_COUNT_LONG 50
+#define MAX_COUNT_LONG 50
+
+#define SLEEP_DURATION 60 /* in usec */
+#define SLEEP_DURATION_LONG 210 /* in usec */
+
+#define TPM_HEADER_SIZE 10
+
+/*
+ * Expected value for DIDVID register
+ *
+ * The only device the system knows about at this moment is Infineon slb9635.
+ */
+#define TPM_TIS_I2C_DID_VID 0x000b15d1L
+
+enum tis_access {
+ TPM_ACCESS_VALID = 0x80,
+ TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
+ TPM_ACCESS_REQUEST_PENDING = 0x04,
+ TPM_ACCESS_REQUEST_USE = 0x02,
+};
+
+enum tis_status {
+ TPM_STS_VALID = 0x80,
+ TPM_STS_COMMAND_READY = 0x40,
+ TPM_STS_GO = 0x20,
+ TPM_STS_DATA_AVAIL = 0x10,
+ TPM_STS_DATA_EXPECT = 0x08,
+};
-#define SLEEP_DURATION_LONG 210 /* in usec */
+enum tis_defaults {
+ TIS_SHORT_TIMEOUT = 750, /* ms */
+ TIS_LONG_TIMEOUT = 2000, /* ms */
+};
/* expected value for DIDVID register */
#define TPM_TIS_I2C_DID_VID_9635 0x000b15d1L
[UNKNOWN] = "unknown/fallback to slb9635",
};
+#define TPM_ACCESS(l) (0x0000 | ((l) << 4))
+#define TPM_STS(l) (0x0001 | ((l) << 4))
+#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4))
+#define TPM_DID_VID(l) (0x0006 | ((l) << 4))
+
/* Structure to store I2C TPM specific stuff */
-struct tpm_inf_dev {
+struct tpm_dev {
uint addr;
- u8 buf[TPM_BUFSIZE + sizeof(u8)]; /* max. buffer size + addr */
+ u8 buf[TPM_DEV_BUFSIZE + sizeof(u8)]; /* Max buffer size + addr */
enum i2c_chip_type chip_type;
};
-static struct tpm_inf_dev tpm_dev = {
+static struct tpm_dev tpm_dev = {
.addr = TPM_I2C_ADDR
};
+static struct tpm_dev tpm_dev;
+
/*
* iic_tpm_read() - read from TPM register
* @addr: register address to read from
*
* Return -EIO on error, 0 on success.
*/
-int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
+static int iic_tpm_read(u8 addr, u8 *buffer, size_t len)
{
int rc;
int count;
- uint myaddr = addr;
- /* we have to use uint here, uchar hangs the board */
+ uint32_t addrbuf = addr;
if ((tpm_dev.chip_type == SLB9635) || (tpm_dev.chip_type == UNKNOWN)) {
/* slb9635 protocol should work in both cases */
for (count = 0; count < MAX_COUNT; count++) {
rc = i2c_write(tpm_dev.addr, 0, 0,
- (uchar *)&myaddr, 1);
+ (uchar *)&addrbuf, 1);
if (rc == 0)
- break; /* success, break to skip sleep */
-
+ break; /* Success, break to skip sleep */
udelay(SLEEP_DURATION);
}
-
if (rc)
return -rc;
break; /* success, break to skip sleep */
}
} else {
- /* use a combined read for newer chips
- * unfortunately the smbus functions are not suitable due to
+ /*
+ * Use a combined read for newer chips.
+ * Unfortunately the smbus functions are not suitable due to
* the 32 byte limit of the smbus.
- * retries should usually not be needed, but are kept just to
+ * Retries should usually not be needed, but are kept just to
* be safe on the safe side.
*/
for (count = 0; count < MAX_COUNT; count++) {
}
}
- /* take care of 'guard time' */
+ /* Take care of 'guard time' */
udelay(SLEEP_DURATION);
if (rc)
return -rc;
}
static int iic_tpm_write_generic(u8 addr, u8 *buffer, size_t len,
- unsigned int sleep_time,
- u8 max_count)
+ unsigned int sleep_time, u8 max_count)
{
int rc = 0;
int count;
- /* prepare send buffer */
+ /* Prepare send buffer */
tpm_dev.buf[0] = addr;
memcpy(&(tpm_dev.buf[1]), buffer, len);
for (count = 0; count < max_count; count++) {
rc = i2c_write(tpm_dev.addr, 0, 0, tpm_dev.buf, len + 1);
if (rc == 0)
- break; /* success, break to skip sleep */
-
+ break; /* Success, break to skip sleep */
udelay(sleep_time);
}
/*
* This function is needed especially for the cleanup situation after
* sending TPM_READY
- * */
+ */
static int iic_tpm_write_long(u8 addr, u8 *buffer, size_t len)
{
return iic_tpm_write_generic(addr, buffer, len, SLEEP_DURATION_LONG,
MAX_COUNT_LONG);
}
-#define TPM_HEADER_SIZE 10
-
-enum tis_access {
- TPM_ACCESS_VALID = 0x80,
- TPM_ACCESS_ACTIVE_LOCALITY = 0x20,
- TPM_ACCESS_REQUEST_PENDING = 0x04,
- TPM_ACCESS_REQUEST_USE = 0x02,
-};
-
-enum tis_status {
- TPM_STS_VALID = 0x80,
- TPM_STS_COMMAND_READY = 0x40,
- TPM_STS_GO = 0x20,
- TPM_STS_DATA_AVAIL = 0x10,
- TPM_STS_DATA_EXPECT = 0x08,
-};
-
-enum tis_defaults {
- TIS_SHORT_TIMEOUT = 750, /* ms */
- TIS_LONG_TIMEOUT = 2000, /* 2 sec */
-};
-
-#define TPM_ACCESS(l) (0x0000 | ((l) << 4))
-#define TPM_STS(l) (0x0001 | ((l) << 4))
-#define TPM_DATA_FIFO(l) (0x0005 | ((l) << 4))
-#define TPM_DID_VID(l) (0x0006 | ((l) << 4))
-
static int check_locality(struct tpm_chip *chip, int loc)
{
+ const u8 mask = TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID;
u8 buf;
int rc;
if (rc < 0)
return rc;
- if ((buf & (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_ACTIVE_LOCALITY | TPM_ACCESS_VALID)) {
+ if ((buf & mask) == mask) {
chip->vendor.locality = loc;
return loc;
}
static void release_locality(struct tpm_chip *chip, int loc, int force)
{
+ const u8 mask = TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID;
u8 buf;
+
if (iic_tpm_read(TPM_ACCESS(loc), &buf, 1) < 0)
return;
- if (force || (buf & (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) ==
- (TPM_ACCESS_REQUEST_PENDING | TPM_ACCESS_VALID)) {
+ if (force || (buf & mask) == mask) {
buf = TPM_ACCESS_ACTIVE_LOCALITY;
iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
}
u8 buf = TPM_ACCESS_REQUEST_USE;
if (check_locality(chip, loc) >= 0)
- return loc; /* we already have the locality */
+ return loc; /* We already have the locality */
iic_tpm_write(TPM_ACCESS(loc), &buf, 1);
- /* wait for burstcount */
+ /* Wait for burstcount */
start = get_timer(0);
stop = chip->vendor.timeout_a;
do {
if (check_locality(chip, loc) >= 0)
return loc;
- msleep(TPM_TIMEOUT);
+ udelay(TPM_TIMEOUT * 1000);
} while (get_timer(start) < stop);
return -1;
static u8 tpm_tis_i2c_status(struct tpm_chip *chip)
{
- /* NOTE: since i2c read may fail, return 0 in this case --> time-out */
+ /* NOTE: Since i2c read may fail, return 0 in this case --> time-out */
u8 buf;
+
if (iic_tpm_read(TPM_STS(chip->vendor.locality), &buf, 1) < 0)
return 0;
else
static void tpm_tis_i2c_ready(struct tpm_chip *chip)
{
- /* this causes the current command to be aborted */
+ /* This causes the current command to be aborted */
u8 buf = TPM_STS_COMMAND_READY;
+
iic_tpm_write_long(TPM_STS(chip->vendor.locality), &buf, 1);
}
{
unsigned long start, stop;
ssize_t burstcnt;
- u8 buf[3];
+ u8 addr, buf[3];
- /* wait for burstcount */
- /* which timeout value, spec has 2 answers (c & d) */
+ /* Wait for burstcount */
+ /* XXX: Which timeout value? Spec has 2 answers (c & d) */
start = get_timer(0);
stop = chip->vendor.timeout_d;
do {
/* Note: STS is little endian */
- if (iic_tpm_read(TPM_STS(chip->vendor.locality) + 1, buf, 3)
- < 0)
+ addr = TPM_STS(chip->vendor.locality) + 1;
+ if (iic_tpm_read(addr, buf, 3) < 0)
burstcnt = 0;
else
burstcnt = (buf[2] << 16) + (buf[1] << 8) + buf[0];
if (burstcnt)
return burstcnt;
- msleep(TPM_TIMEOUT);
+ udelay(TPM_TIMEOUT * 1000);
} while (get_timer(start) < stop);
return -EBUSY;
}
static int wait_for_stat(struct tpm_chip *chip, u8 mask, unsigned long timeout,
- int *status)
+ int *status)
{
unsigned long start, stop;
- /* check current status */
+ /* Check current status */
*status = tpm_tis_i2c_status(chip);
if ((*status & mask) == mask)
return 0;
start = get_timer(0);
stop = timeout;
do {
- msleep(TPM_TIMEOUT);
+ udelay(TPM_TIMEOUT * 1000);
*status = tpm_tis_i2c_status(chip);
if ((*status & mask) == mask)
return 0;
-
} while (get_timer(start) < stop);
return -ETIME;
while (size < count) {
burstcnt = get_burstcount(chip);
- /* burstcount < 0 = tpm is busy */
+ /* burstcount < 0 -> tpm is busy */
if (burstcnt < 0)
return burstcnt;
- /* limit received data to max. left */
+ /* Limit received data to max left */
if (burstcnt > (count - size))
burstcnt = count - size;
rc = iic_tpm_read(TPM_DATA_FIFO(chip->vendor.locality),
- &(buf[size]),
- burstcnt);
+ &(buf[size]), burstcnt);
if (rc == 0)
size += burstcnt;
}
goto out;
}
- /* read first 10 bytes, including tag, paramsize, and result */
+ /* Read first 10 bytes, including tag, paramsize, and result */
size = recv_data(chip, buf, TPM_HEADER_SIZE);
if (size < TPM_HEADER_SIZE) {
- dev_err(chip->dev, "Unable to read header\n");
+ error("Unable to read header\n");
goto out;
}
}
size += recv_data(chip, &buf[TPM_HEADER_SIZE],
- expected - TPM_HEADER_SIZE);
+ expected - TPM_HEADER_SIZE);
if (size < expected) {
- dev_err(chip->dev, "Unable to read remainder of result\n");
+ error("Unable to read remainder of result\n");
size = -ETIME;
goto out;
}
wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
- if (status & TPM_STS_DATA_AVAIL) { /* retry? */
- dev_err(chip->dev, "Error left over data\n");
+ if (status & TPM_STS_DATA_AVAIL) { /* Retry? */
+ error("Error left over data\n");
size = -EIO;
goto out;
}
out:
tpm_tis_i2c_ready(chip);
- /* The TPM needs some time to clean up here,
+ /*
+ * The TPM needs some time to clean up here,
* so we sleep rather than keeping the bus busy
*/
udelay(2000);
int rc, status;
ssize_t burstcnt;
size_t count = 0;
+ int retry = 0;
u8 sts = TPM_STS_GO;
- if (len > TPM_BUFSIZE)
- return -E2BIG; /* command is too long for our tpm, sorry */
+ if (len > TPM_DEV_BUFSIZE)
+ return -E2BIG; /* Command is too long for our tpm, sorry */
if (request_locality(chip, 0) < 0)
return -EBUSY;
status = tpm_tis_i2c_status(chip);
if ((status & TPM_STS_COMMAND_READY) == 0) {
tpm_tis_i2c_ready(chip);
- if (wait_for_stat
- (chip, TPM_STS_COMMAND_READY,
- chip->vendor.timeout_b, &status) < 0) {
+ if (wait_for_stat(chip, TPM_STS_COMMAND_READY,
+ chip->vendor.timeout_b, &status) < 0) {
rc = -ETIME;
goto out_err;
}
}
- while (count < len - 1) {
- burstcnt = get_burstcount(chip);
+ burstcnt = get_burstcount(chip);
- /* burstcount < 0 = tpm is busy */
- if (burstcnt < 0)
- return burstcnt;
+ /* burstcount < 0 -> tpm is busy */
+ if (burstcnt < 0)
+ return burstcnt;
- if (burstcnt > (len-1-count))
- burstcnt = len-1-count;
+ while (count < len - 1) {
+ if (burstcnt > len - 1 - count)
+ burstcnt = len - 1 - count;
-#ifdef CONFIG_TPM_I2C_BURST_LIMITATION
- if (burstcnt > CONFIG_TPM_I2C_BURST_LIMITATION)
- burstcnt = CONFIG_TPM_I2C_BURST_LIMITATION;
-#endif /* CONFIG_TPM_I2C_BURST_LIMITATION */
+#ifdef CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+ if (retry && burstcnt > CONFIG_TPM_TIS_I2C_BURST_LIMITATION)
+ burstcnt = CONFIG_TPM_TIS_I2C_BURST_LIMITATION;
+#endif /* CONFIG_TPM_TIS_I2C_BURST_LIMITATION */
rc = iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality),
- &(buf[count]), burstcnt);
+ &(buf[count]), burstcnt);
if (rc == 0)
count += burstcnt;
-
- wait_for_stat(chip, TPM_STS_VALID,
- chip->vendor.timeout_c, &status);
-
- if ((status & TPM_STS_DATA_EXPECT) == 0) {
- rc = -EIO;
- goto out_err;
+ else {
+ retry++;
+ wait_for_stat(chip, TPM_STS_VALID,
+ chip->vendor.timeout_c, &status);
+
+ if ((status & TPM_STS_DATA_EXPECT) == 0) {
+ rc = -EIO;
+ goto out_err;
+ }
}
}
- /* write last byte */
+ /* Write last byte */
iic_tpm_write(TPM_DATA_FIFO(chip->vendor.locality), &(buf[count]), 1);
wait_for_stat(chip, TPM_STS_VALID, chip->vendor.timeout_c, &status);
if ((status & TPM_STS_DATA_EXPECT) != 0) {
goto out_err;
}
- /* go and do it */
+ /* Go and do it */
iic_tpm_write(TPM_STS(chip->vendor.locality), &sts, 1);
return len;
+
out_err:
tpm_tis_i2c_ready(chip);
- /* The TPM needs some time to clean up here,
+ /*
+ * The TPM needs some time to clean up here,
* so we sleep rather than keeping the bus busy
*/
udelay(2000);
.req_canceled = TPM_STS_COMMAND_READY,
};
+
static enum i2c_chip_type tpm_vendor_chip_type(void)
{
#ifdef CONFIG_OF_CONTROL
return UNKNOWN;
}
-/* initialisation of i2c tpm */
-
-
+/* Initialisation of i2c tpm */
int tpm_vendor_init(uint32_t dev_addr)
{
u32 vendor;
chip->vendor.timeout_c = TIS_SHORT_TIMEOUT;
chip->vendor.timeout_d = TIS_SHORT_TIMEOUT;
- if (request_locality(chip, 0) != 0) {
+ if (request_locality(chip, 0) < 0) {
rc = -ENODEV;
goto out_err;
}
- /* read four bytes from DID_VID register */
+ /* Read four bytes from DID_VID register */
if (iic_tpm_read(TPM_DID_VID(0), (uchar *)&vendor, 4) < 0) {
rc = -EIO;
goto out_release;
}
if (tpm_dev.chip_type != UNKNOWN && vendor != expected_did_vid) {
- dev_err(dev, "vendor id did not match! ID was %08x\n", vendor);
+ error("Vendor id did not match! ID was %08x\n", vendor);
rc = -ENODEV;
goto out_release;
}
- dev_info(dev, "1.2 TPM (chip type %s device-id 0x%X)\n",
- chip_name[tpm_dev.chip_type], vendor >> 16);
+ debug("1.2 TPM (chip type %s device-id 0x%X)\n",
+ chip_name[tpm_dev.chip_type], vendor >> 16);
/*
* A timeout query to TPM can be placed here.
projects / karo-tx-uboot.git / commitdiff