bool
select HAS_VBAR
+config CPU_V7M
+ bool
+
config CPU_PXA
bool
default "arm1136" if CPU_ARM1136
default "arm1176" if CPU_ARM1176
default "armv7" if CPU_V7
+ default "armv7m" if CPU_V7M
default "pxa" if CPU_PXA
default "sa1100" if CPU_SA1100
default "armv8" if ARM64
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+extra-y := start.o
+obj-y += cpu.o
--- /dev/null
+#
+# (C) Copyright 2015
+# Kamil Lulko, <rev13@wp.pl>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+PLATFORM_CPPFLAGS += -march=armv7-m -mthumb
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+
+/*
+ * This is called right before passing control to
+ * the Linux kernel point.
+ */
+int cleanup_before_linux(void)
+{
+ return 0;
+}
+
+/*
+ * Perform the low-level reset.
+ */
+void reset_cpu(ulong addr)
+{
+ /*
+ * Perform reset but keep priority group unchanged.
+ */
+ writel((V7M_AIRCR_VECTKEY << V7M_AIRCR_VECTKEY_SHIFT)
+ | (V7M_SCB->aircr & V7M_AIRCR_PRIGROUP_MSK)
+ | V7M_AIRCR_SYSRESET, &V7M_SCB->aircr);
+}
--- /dev/null
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+.globl reset
+.type reset, %function
+reset:
+ b _main
+
+.globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+ mov pc, lr
--- /dev/null
+/*
+ * (C) Copyright 2010,2011
+ * Vladimir Khusainov, Emcraft Systems, vlad@emcraft.com
+ *
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef ARMV7M_H
+#define ARMV7M_H
+
+#if defined(__ASSEMBLY__)
+.syntax unified
+.thumb
+#endif
+
+#define V7M_SCB_BASE 0xE000ED00
+#define V7M_MPU_BASE 0xE000ED90
+
+#define V7M_SCB_VTOR 0x08
+
+#if !defined(__ASSEMBLY__)
+struct v7m_scb {
+ uint32_t cpuid; /* CPUID Base Register */
+ uint32_t icsr; /* Interrupt Control and State Register */
+ uint32_t vtor; /* Vector Table Offset Register */
+ uint32_t aircr; /* App Interrupt and Reset Control Register */
+};
+#define V7M_SCB ((struct v7m_scb *)V7M_SCB_BASE)
+
+#define V7M_AIRCR_VECTKEY 0x5fa
+#define V7M_AIRCR_VECTKEY_SHIFT 16
+#define V7M_AIRCR_ENDIAN (1 << 15)
+#define V7M_AIRCR_PRIGROUP_SHIFT 8
+#define V7M_AIRCR_PRIGROUP_MSK (0x7 << V7M_AIRCR_PRIGROUP_SHIFT)
+#define V7M_AIRCR_SYSRESET (1 << 2)
+
+#define V7M_ICSR_VECTACT_MSK 0xFF
+
+struct v7m_mpu {
+ uint32_t type; /* Type Register */
+ uint32_t ctrl; /* Control Register */
+ uint32_t rnr; /* Region Number Register */
+ uint32_t rbar; /* Region Base Address Register */
+ uint32_t rasr; /* Region Attribute and Size Register */
+};
+#define V7M_MPU ((struct v7m_mpu *)V7M_MPU_BASE)
+
+#define V7M_MPU_CTRL_ENABLE (1 << 0)
+#define V7M_MPU_CTRL_HFNMIENA (1 << 1)
+
+#define V7M_MPU_RASR_EN (1 << 0)
+#define V7M_MPU_RASR_SIZE_BITS 1
+#define V7M_MPU_RASR_SIZE_4GB (31 << V7M_MPU_RASR_SIZE_BITS)
+#define V7M_MPU_RASR_AP_RW_RW (3 << 24)
+
+#endif /* !defined(__ASSEMBLY__) */
+#endif /* ARMV7M_H */
lib-$(CONFIG_USE_PRIVATE_LIBGCC) += _ashldi3.o _ashrdi3.o _divsi3.o \
_lshrdi3.o _modsi3.o _udivsi3.o _umodsi3.o div0.o
-ifdef CONFIG_ARM64
+ifdef CONFIG_CPU_V7M
+obj-y += vectors_m.o crt0.o
+else ifdef CONFIG_ARM64
obj-y += crt0_64.o
else
obj-y += vectors.o crt0.o
obj-y += sections.o
obj-y += stack.o
-ifdef CONFIG_ARM64
+ifdef CONFIG_CPU_V7M
+obj-y += interrupts_m.o
+else ifdef CONFIG_ARM64
obj-y += gic_64.o
obj-y += interrupts_64.o
else
#include <config.h>
#include <asm-offsets.h>
#include <linux/linkage.h>
+#ifdef CONFIG_CPU_V7M
+#include <asm/armv7m.h>
+#endif
/*
* This file handles the target-independent stages of the U-Boot
#else
ldr sp, =CONFIG_SYS_INIT_SP_ADDR
#endif
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
mov r2, sp
sub sp, sp, #GD_SIZE /* allocate one GD above SP */
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
mov r9, sp /* GD is above SP */
mov r1, sp
mov r0, #0
clr_gd:
cmp r1, r2 /* while not at end of GD */
+#if defined(CONFIG_CPU_V7M)
+ itt lo
+#endif
strlo r0, [r1] /* clear 32-bit GD word */
addlo r1, r1, #4 /* move to next */
blo clr_gd
*/
ldr sp, [r9, #GD_START_ADDR_SP] /* sp = gd->start_addr_sp */
+#if defined(CONFIG_CPU_V7M) /* v7M forbids using SP as BIC destination */
+ mov r3, sp
+ bic r3, r3, #7
+ mov sp, r3
+#else
bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
+#endif
ldr r9, [r9, #GD_BD] /* r9 = gd->bd */
sub r9, r9, #GD_SIZE /* new GD is below bd */
adr lr, here
ldr r0, [r9, #GD_RELOC_OFF] /* r0 = gd->reloc_off */
add lr, lr, r0
+#if defined(CONFIG_CPU_V7M)
+ orr lr, #1 /* As required by Thumb-only */
+#endif
ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
b relocate_code
here:
mov r2, #0x00000000 /* prepare zero to clear BSS */
clbss_l:cmp r0, r1 /* while not at end of BSS */
+#if defined(CONFIG_CPU_V7M)
+ itt lo
+#endif
strlo r2, [r0] /* clear 32-bit BSS word */
addlo r0, r0, #4 /* move to next */
blo clbss_l
--- /dev/null
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+
+/*
+ * Upon exception entry ARMv7-M processors automatically save stack
+ * frames containing some registers. For simplicity initial
+ * implementation uses only this auto-saved stack frame.
+ * This does not contain complete register set dump,
+ * only R0-R3, R12, LR, PC and xPSR are saved.
+ */
+
+struct autosave_regs {
+ long uregs[8];
+};
+
+#define ARM_XPSR uregs[7]
+#define ARM_PC uregs[6]
+#define ARM_LR uregs[5]
+#define ARM_R12 uregs[4]
+#define ARM_R3 uregs[3]
+#define ARM_R2 uregs[2]
+#define ARM_R1 uregs[1]
+#define ARM_R0 uregs[0]
+
+int interrupt_init(void)
+{
+ return 0;
+}
+
+void enable_interrupts(void)
+{
+ return;
+}
+
+int disable_interrupts(void)
+{
+ return 0;
+}
+
+void dump_regs(struct autosave_regs *regs)
+{
+ printf("pc : %08lx lr : %08lx xPSR : %08lx\n",
+ regs->ARM_PC, regs->ARM_LR, regs->ARM_XPSR);
+ printf("r12 : %08lx r3 : %08lx r2 : %08lx\n"
+ "r1 : %08lx r0 : %08lx\n",
+ regs->ARM_R12, regs->ARM_R3, regs->ARM_R2,
+ regs->ARM_R1, regs->ARM_R0);
+}
+
+void bad_mode(void)
+{
+ panic("Resetting CPU ...\n");
+ reset_cpu(0);
+}
+
+void do_hard_fault(struct autosave_regs *autosave_regs)
+{
+ printf("Hard fault\n");
+ dump_regs(autosave_regs);
+ bad_mode();
+}
+
+void do_mm_fault(struct autosave_regs *autosave_regs)
+{
+ printf("Memory management fault\n");
+ dump_regs(autosave_regs);
+ bad_mode();
+}
+
+void do_bus_fault(struct autosave_regs *autosave_regs)
+{
+ printf("Bus fault\n");
+ dump_regs(autosave_regs);
+ bad_mode();
+}
+
+void do_usage_fault(struct autosave_regs *autosave_regs)
+{
+ printf("Usage fault\n");
+ dump_regs(autosave_regs);
+ bad_mode();
+}
+
+void do_invalid_entry(struct autosave_regs *autosave_regs)
+{
+ printf("Exception\n");
+ dump_regs(autosave_regs);
+ bad_mode();
+}
#include <asm-offsets.h>
#include <config.h>
#include <linux/linkage.h>
+#ifdef CONFIG_CPU_V7M
+#include <asm/armv7m.h>
+#endif
/*
* Default/weak exception vectors relocation routine
ENTRY(relocate_vectors)
+#ifdef CONFIG_CPU_V7M
+ /*
+ * On ARMv7-M we only have to write the new vector address
+ * to VTOR register.
+ */
+ ldr r0, [r9, #GD_RELOCADDR] /* r0 = gd->relocaddr */
+ ldr r1, =V7M_SCB_BASE
+ str r0, [r1, V7M_SCB_VTOR]
+#else
#ifdef CONFIG_HAS_VBAR
/*
* If the ARM processor has the security extensions,
stmia r1!, {r2-r8,r10}
ldmia r0!, {r2-r8,r10}
stmia r1!, {r2-r8,r10}
+#endif
#endif
bx lr
--- /dev/null
+/*
+ * (C) Copyright 2015
+ * Kamil Lulko, <rev13@wp.pl>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/armv7m.h>
+#include <linux/linkage.h>
+
+.type __hard_fault_entry, %function
+__hard_fault_entry:
+ mov r0, sp @ pass auto-saved registers as argument
+ b do_hard_fault
+
+.type __mm_fault_entry, %function
+__mm_fault_entry:
+ mov r0, sp @ pass auto-saved registers as argument
+ b do_mm_fault
+
+.type __bus_fault_entry, %function
+__bus_fault_entry:
+ mov r0, sp @ pass auto-saved registers as argument
+ b do_bus_fault
+
+.type __usage_fault_entry, %function
+__usage_fault_entry:
+ mov r0, sp @ pass auto-saved registers as argument
+ b do_usage_fault
+
+.type __invalid_entry, %function
+__invalid_entry:
+ mov r0, sp @ pass auto-saved registers as argument
+ b do_invalid_entry
+
+ .section .vectors
+ENTRY(_start)
+ .long CONFIG_SYS_INIT_SP_ADDR @ 0 - Reset stack pointer
+ .long reset @ 1 - Reset
+ .long __invalid_entry @ 2 - NMI
+ .long __hard_fault_entry @ 3 - HardFault
+ .long __mm_fault_entry @ 4 - MemManage
+ .long __bus_fault_entry @ 5 - BusFault
+ .long __usage_fault_entry @ 6 - UsageFault
+ .long __invalid_entry @ 7 - Reserved
+ .long __invalid_entry @ 8 - Reserved
+ .long __invalid_entry @ 9 - Reserved
+ .long __invalid_entry @ 10 - Reserved
+ .long __invalid_entry @ 11 - SVCall
+ .long __invalid_entry @ 12 - Debug Monitor
+ .long __invalid_entry @ 13 - Reserved
+ .long __invalid_entry @ 14 - PendSV
+ .long __invalid_entry @ 15 - SysTick
+ .rept 255 - 16
+ .long __invalid_entry @ 16..255 - External Interrupts
+ .endr
projects / karo-tx-uboot.git / commitdiff