prompt "Target select"
optional
-config TARGET_ADP_AG101
- bool "Support adp-ag101"
-
config TARGET_ADP_AG101P
bool "Support adp-ag101p"
-config TARGET_ADP_AG102
- bool "Support adp-ag102"
-
endchoice
-source "board/AndesTech/adp-ag101/Kconfig"
source "board/AndesTech/adp-ag101p/Kconfig"
-source "board/AndesTech/adp-ag102/Kconfig"
endmenu
+++ /dev/null
-#
-# (C) Copyright 2009
-# Marvell Semiconductor <www.marvell.com>
-# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := cpu.o timer.o
-
-ifndef CONFIG_SKIP_LOWLEVEL_INIT
-obj-y += lowlevel_init.o
-endif
-
-ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-obj-y += watchdog.o
-endif
+++ /dev/null
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-/* CPU specific code */
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#include <asm/cache.h>
-
-#include <faraday/ftwdt010_wdt.h>
-
-/*
- * cleanup_before_linux() is called just before we call linux
- * it prepares the processor for linux
- *
- * we disable interrupt and caches.
- */
-int cleanup_before_linux(void)
-{
- disable_interrupts();
-
-#ifdef CONFIG_MMU
- /* turn off I/D-cache */
- icache_disable();
- dcache_disable();
-
- /* flush I/D-cache */
- invalidate_icac();
- invalidate_dcac();
-#endif
-
- return 0;
-}
-
-int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- disable_interrupts();
-
- /*
- * reset to the base addr of andesboot.
- * currently no ROM loader at addr 0.
- * do not use reset_cpu(0);
- */
-#ifdef CONFIG_FTWDT010_WATCHDOG
- /*
- * workaround: if we use CONFIG_HW_WATCHDOG with ftwdt010, will lead
- * automatic hardware reset when booting Linux.
- * Please do not use CONFIG_HW_WATCHDOG and WATCHDOG_RESET() here.
- */
- ftwdt010_wdt_reset();
-#endif /* CONFIG_FTWDT010_WATCHDOG */
- hang();
-
- /*NOTREACHED*/
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-.text
-
-#include <common.h>
-#include <config.h>
-
-#include <asm/macro.h>
-#include <generated/asm-offsets.h>
-
-/*
- * parameters for Synopsys DWC DDR2/DDR1 Memory Controller
- */
-#define DDR2C_BASE_A (CONFIG_DWCDDR21MCTL_BASE)
-#define DDR2C_CCR_A (DDR2C_BASE_A + DWCDDR21MCTL_CCR)
-#define DDR2C_DCR_A (DDR2C_BASE_A + DWCDDR21MCTL_DCR)
-#define DDR2C_IOCR_A (DDR2C_BASE_A + DWCDDR21MCTL_IOCR)
-#define DDR2C_CSR_A (DDR2C_BASE_A + DWCDDR21MCTL_CSR)
-#define DDR2C_DRR_A (DDR2C_BASE_A + DWCDDR21MCTL_DRR)
-#define DDR2C_DLLCR0_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR0)
-#define DDR2C_DLLCR1_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR1)
-#define DDR2C_DLLCR2_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR2)
-#define DDR2C_DLLCR3_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR3)
-#define DDR2C_DLLCR4_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR4)
-#define DDR2C_DLLCR5_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR5)
-#define DDR2C_DLLCR6_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR6)
-#define DDR2C_DLLCR7_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR7)
-#define DDR2C_DLLCR8_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR8)
-#define DDR2C_DLLCR9_A (DDR2C_BASE_A + DWCDDR21MCTL_DLLCR9)
-#define DDR2C_RSLR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RSLR0)
-#define DDR2C_RDGR0_A (DDR2C_BASE_A + DWCDDR21MCTL_RDGR0)
-#define DDR2C_DTAR_A (DDR2C_BASE_A + DWCDDR21MCTL_DTAR)
-#define DDR2C_MR_A (DDR2C_BASE_A + DWCDDR21MCTL_MR)
-
-#define DDR2C_CCR_D CONFIG_SYS_DWCDDR21MCTL_CCR
-#define DDR2C_CCR_D2 CONFIG_SYS_DWCDDR21MCTL_CCR2
-#define DDR2C_DCR_D CONFIG_SYS_DWCDDR21MCTL_DCR
-#define DDR2C_IOCR_D CONFIG_SYS_DWCDDR21MCTL_IOCR
-#define DDR2C_CSR_D CONFIG_SYS_DWCDDR21MCTL_CSR
-#define DDR2C_DRR_D CONFIG_SYS_DWCDDR21MCTL_DRR
-#define DDR2C_RSLR0_D CONFIG_SYS_DWCDDR21MCTL_RSLR0
-#define DDR2C_RDGR0_D CONFIG_SYS_DWCDDR21MCTL_RDGR0
-#define DDR2C_DTAR_D CONFIG_SYS_DWCDDR21MCTL_DTAR
-#define DDR2C_MR_D CONFIG_SYS_DWCDDR21MCTL_MR
-
-#define DDR2C_DLLCR0_D CONFIG_SYS_DWCDDR21MCTL_DLLCR0 /* 0-9 are same */
-
-/*
- * parameters for the ahbc controller
- */
-#define AHBC_CR_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_CR)
-#define AHBC_BSR6_A (CONFIG_FTAHBC020S_BASE + FTAHBC020S_SLAVE_BSR_6)
-
-#define AHBC_BSR6_D CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6
-
-/*
- * parameters for the ANDES PCU controller
- */
-#define PCU_PCS4_A (CONFIG_ANDES_PCU_BASE + ANDES_PCU_PCS4)
-#define PCU_PCS4_D CONFIG_SYS_ANDES_CPU_PCS4
-
-/*
- * numeric 7 segment display
- */
-.macro led, num
- write32 CONFIG_DEBUG_LED, \num
-.endm
-
-/*
- * Waiting for SDRAM to set up
- */
-/*
-.macro wait_sdram
- li $r0, DDR2C_CSR_A
-1:
- lwi $r1, [$r0+FTSDMC021_CR2]
- bnez $r1, 1b
-.endm
-*/
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-.globl lowlevel_init
-lowlevel_init:
- move $r10, $lp
-
- /* U200 */
-! led 0x00
-! jal scale_to_500mhz
-
- led 0x10
- jal mem_init
-
- led 0x20
- jal remap
-
-#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
- led 0x2f
- jal enable_fpu
-#endif
-
- led 0x30
- ret $r10
-
-scale_to_500mhz:
- move $r11, $lp
-
- /*
- * scale to 500Mhz
- */
- led 0x01
- write32 PCU_PCS4_A, 0x1102000f ! save data to PCS4
-
- move $lp, $r11
- ret
-
-mem_init:
- move $r11, $lp
-
- /*
- * config AHB Controller
- */
- led 0x12
- write32 AHBC_BSR6_A, AHBC_BSR6_D
-
- /*
- * config Synopsys DWC DDR2/DDR1 Memory Controller
- */
-ddr2c_init:
-set_dcr:
- led 0x14
- write32 DDR2C_DCR_A, DDR2C_DCR_D ! 0x000020d4
-
-auto_sizing:
- /*
- * ebios: $r10->$r7, $r11->$r8, $r12->$r9, $r13->$r12, $r14->$r13
- */
-set_iocr:
- led 0x19
- write32 DDR2C_IOCR_A, DDR2C_IOCR_D
-set_drr:
- led 0x16
- write32 DDR2C_DRR_A, DDR2C_DRR_D ! 0x00034812
-set_dllcr:
- led 0x18
- write32 DDR2C_DLLCR0_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR1_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR2_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR3_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR4_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR5_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR6_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR7_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR8_A, DDR2C_DLLCR0_D
- write32 DDR2C_DLLCR9_A, DDR2C_DLLCR0_D
-set_rslr0:
- write32 DDR2C_RSLR0_A, DDR2C_RSLR0_D ! 0x00000040
-set_rdgr0:
- write32 DDR2C_RDGR0_A, DDR2C_RDGR0_D ! 0x000055cf
-set_dtar:
- led 0x15
- write32 DDR2C_DTAR_A, DDR2C_DTAR_D ! 0x00100000
-set_mode:
- led 0x17
- write32 DDR2C_MR_A, DDR2C_MR_D ! 0x00000852
-set_ccr:
- write32 DDR2C_CCR_A, DDR2C_CCR_D
-
-#ifdef TRIGGER_INIT:
-trigger_init:
- write32 DDR2C_CCR_A, DDR2C_CCR_D ! 0x80020000
-
- /* Wait for ddr init state to be set */
- msync ALL
- isb
-
- /* Wait until the config initialization is finish */
-1:
- la $r4, DDR2C_CSR_A
- lwi $r5, [$r4]
- srli $r5, $r5, 23
- bnez $r5, 1b
-#endif
-
-data_training:
-! write32 DDR2C_CCR_A, DDR2C_CCR_D2 ! 0x40020004
-
- /* Wait for ddr init state to be set */
- msync ALL
- isb
-
- /* wait until the ddr data trainning is complete */
-1:
- la $r4, DDR2C_CSR_A
- lwi $r5, [$r4]
- srli $r6, $r5, 23
- bnez $r6, 1b
-
- lwi $r1, [$r4]
- srli $r6, $r5, 20
- li $r5, 0x00ffffff
- swi $r1, [$r4]
- bnez $r6, ddr2c_init
-
- led 0x1a
- move $lp, $r11
- ret
-
-remap:
- move $r11, $lp
-#ifdef __NDS32_N1213_43U1H__ /* NDS32 V0 ISA - AG101 Only */
- bal 2f
-relo_base:
- move $r0, $lp
-#else
-relo_base:
- mfusr $r0, $pc
-#endif /* __NDS32_N1213_43U1H__ */
-
- /*
- * Remapping
- */
-#ifdef CONFIG_MEM_REMAP
- /*
- * Copy ROM code to SDRAM base for memory remap layout.
- * This is not the real relocation, the real relocation is the function
- * relocate_code() is start.S which supports the systems is memory
- * remapped or not.
- */
- /*
- * Doing memory remap is essential for preparing some non-OS or RTOS
- * applications.
- *
- * This is also a must on ADP-AG101 board.
- * The reason is because the ROM/FLASH circuit on PCB board.
- * AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
- * ROM/FLASH is used to boot.
- *
- * When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
- * and the FLASH is connected to BANK1.
- * When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
- * and the FLASH is connected to BANK0.
- * It will occur problem when doing flash probing if the flash is at
- * BANK0 (0x00000000) while memory remapping was skipped.
- *
- * Other board like ADP-AG101P may not enable this since there is only
- * a FLASH connected to bank0.
- */
- led 0x21
- li $r4, PHYS_SDRAM_0_AT_INIT /* 0x10000000 */
- li $r5, 0x0
- la $r1, relo_base /* get $pc or $lp */
- sub $r2, $r0, $r1
- sethi $r6, hi20(_end)
- ori $r6, $r6, lo12(_end)
- add $r6, $r6, $r2
-1:
- lwi.p $r7, [$r5], #4
- swi.p $r7, [$r4], #4
- blt $r5, $r6, 1b
-
- /* set remap bit */
- /*
- * MEM remap bit is operational
- * - use it to map writeable memory at 0x00000000, in place of flash
- * - before remap: flash/rom 0x00000000, sdram: 0x10000000-0x4fffffff
- * - after remap: flash/rom 0x80000000, sdram: 0x00000000
- */
- led 0x2c
- setbf15 AHBC_CR_A, FTAHBC020S_CR_REMAP ! 0x1
-
-#endif /* #ifdef CONFIG_MEM_REMAP */
- move $lp, $r11
-2:
- ret
-
- /*
- * enable_fpu:
- * Some of Andes CPU version support FPU coprocessor, if so,
- * and toolchain support FPU instruction set, we should enable it.
- */
-#if (defined(NDS32_EXT_FPU_DP) || defined(NDS32_EXT_FPU_SP))
-enable_fpu:
- mfsr $r0, $CPU_VER /* enable FPU if it exists */
- srli $r0, $r0, 3
- andi $r0, $r0, 1
- beqz $r0, 1f /* skip if no COP */
- mfsr $r0, $FUCOP_EXIST
- srli $r0, $r0, 31
- beqz $r0, 1f /* skip if no FPU */
- mfsr $r0, $FUCOP_CTL
- ori $r0, $r0, 1
- mtsr $r0, $FUCOP_CTL
-1:
- ret
-#endif
-
-.globl show_led
-show_led:
- li $r8, (CONFIG_DEBUG_LED)
- swi $r7, [$r8]
- ret
-#endif /* #ifndef CONFIG_SKIP_LOWLEVEL_INIT */
+++ /dev/null
-/*
- * (C) Copyright 2009 Faraday Technology
- * Po-Yu Chuang <ratbert@faraday-tech.com>
- *
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <faraday/fttmr010.h>
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
- unsigned int cr;
-
- debug("%s()\n", __func__);
-
- /* disable timers */
- writel(0, &tmr->cr);
-
-#ifdef CONFIG_FTTMR010_EXT_CLK
- /* use 32768Hz oscillator for RTC, WDT, TIMER */
- ftpmu010_32768osc_enable();
-#endif
-
- /* setup timer */
- writel(TIMER_LOAD_VAL, &tmr->timer3_load);
- writel(TIMER_LOAD_VAL, &tmr->timer3_counter);
- writel(0, &tmr->timer3_match1);
- writel(0, &tmr->timer3_match2);
-
- /* we don't want timer to issue interrupts */
- writel(FTTMR010_TM3_MATCH1 |
- FTTMR010_TM3_MATCH2 |
- FTTMR010_TM3_OVERFLOW,
- &tmr->interrupt_mask);
-
- cr = readl(&tmr->cr);
-#ifdef CONFIG_FTTMR010_EXT_CLK
- cr |= FTTMR010_TM3_CLOCK; /* use external clock */
-#endif
- cr |= FTTMR010_TM3_ENABLE;
- writel(cr, &tmr->cr);
-
- /* init the timestamp and lastdec value */
- reset_timer_masked();
-
- return 0;
-}
-
-/*
- * timer without interrupts
- */
-
-/*
- * reset time
- */
-void reset_timer_masked(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
- /* capure current decrementer value time */
-#ifdef CONFIG_FTTMR010_EXT_CLK
- lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-#else
- lastdec = readl(&tmr->timer3_counter) /
- (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
-#endif
- timestamp = 0; /* start "advancing" time stamp from 0 */
-
- debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
-
-void reset_timer(void)
-{
- debug("%s()\n", __func__);
- reset_timer_masked();
-}
-
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
- /* current tick value */
-#ifdef CONFIG_FTTMR010_EXT_CLK
- ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-#else
- ulong now = readl(&tmr->timer3_counter) /
- (CONFIG_SYS_CLK_FREQ / 2 / CONFIG_SYS_HZ);
-#endif
-
- debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
- if (lastdec >= now) {
- /*
- * normal mode (non roll)
- * move stamp fordward with absoulte diff ticks
- */
- timestamp += lastdec - now;
- } else {
- /*
- * we have overflow of the count down timer
- *
- * nts = ts + ld + (TLV - now)
- * ts=old stamp, ld=time that passed before passing through -1
- * (TLV-now) amount of time after passing though -1
- * nts = new "advancing time stamp"...it could also roll and
- * cause problems.
- */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
-
- lastdec = now;
-
- debug("%s() returns %lx\n", __func__, timestamp);
-
- return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
- */
-ulong get_timer(ulong base)
-{
- debug("%s(%lx)\n", __func__, base);
- return get_timer_masked() - base;
-}
-
-void set_timer(ulong t)
-{
- debug("%s(%lx)\n", __func__, t);
- timestamp = t;
-}
-
-/* delay x useconds AND preserve advance timestamp value */
-void __udelay(unsigned long usec)
-{
- struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
-
-#ifdef CONFIG_FTTMR010_EXT_CLK
- long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
-#else
- long tmo = usec * ((CONFIG_SYS_CLK_FREQ / 2) / 1000) / 1000;
-#endif
- unsigned long now, last = readl(&tmr->timer3_counter);
-
- debug("%s(%lu)\n", __func__, usec);
- while (tmo > 0) {
- now = readl(&tmr->timer3_counter);
- if (now > last) /* count down timer overflow */
- tmo -= TIMER_LOAD_VAL + last - now;
- else
- tmo -= last - now;
- last = now;
- }
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
- debug("%s()\n", __func__);
- return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk(void)
-{
- debug("%s()\n", __func__);
-#ifdef CONFIG_FTTMR010_EXT_CLK
- return CONFIG_SYS_HZ;
-#else
- return CONFIG_SYS_CLK_FREQ;
-#endif
-}
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <asm/arch-ag102/ag102.h>
-#include <linux/linkage.h>
-
-.text
-
-#ifndef CONFIG_SKIP_TRUNOFF_WATCHDOG
-ENTRY(turnoff_watchdog)
-
-#define WD_CR 0xC
-#define WD_ENABLE 0x1
-
- ! Turn off the watchdog, according to Faraday FTWDT010 spec
- li $p0, (CONFIG_FTWDT010_BASE+WD_CR) ! Get the addr of WD CR
- lwi $p1, [$p0] ! Get the config of WD
- andi $p1, $p1, 0x1f ! Wipe out useless bits
- li $r0, ~WD_ENABLE
- and $p1, $p1, $r0 ! Set WD disable
- sw $p1, [$p0] ! Write back to WD CR
-
- ! Disable Interrupts by clear GIE in $PSW reg
- setgie.d
-
- ret
-
-ENDPROC(turnoff_watchdog)
-#endif
#endif
/* see arch/arm/kernel/arch.c for a description of these */
-#define MACH_TYPE_ADPAG101 0
-
-#ifdef CONFIG_ARCH_ADPAG101
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_ADPAG101
-# endif
-# define machine_is_adpag101() (machine_arch_type == MACH_TYPE_ADPAG101)
-#else
-# define machine_is_adpag101() (0)
-#endif
-
#define MACH_TYPE_ADPAG101P 1
#ifdef CONFIG_ARCH_ADPAG101P
# define machine_is_adpag101p() (1)
#endif
-#define MACH_TYPE_ADPAG102 2
-
-#ifdef CONFIG_ARCH_ADPAG102
-# ifdef machine_arch_type
-# undef machine_arch_type
-# define machine_arch_type __machine_arch_type
-# else
-# define machine_arch_type MACH_TYPE_ADPAG102
-# endif
-# define machine_is_adpag102() (machine_arch_type == MACH_TYPE_ADPAG102)
-#else
-# define machine_is_adpag102() (2)
-#endif
-
#endif /* __ASM_NDS32_MACH_TYPE_H */
+++ /dev/null
-if TARGET_ADP_AG101
-
-config SYS_CPU
- default "n1213"
-
-config SYS_BOARD
- default "adp-ag101"
-
-config SYS_VENDOR
- default "AndesTech"
-
-config SYS_SOC
- default "ag101"
-
-config SYS_CONFIG_NAME
- default "adp-ag101"
-
-endif
+++ /dev/null
-ADP-AG101 BOARD
-M: Andes <uboot@andestech.com>
-S: Maintained
-F: board/AndesTech/adp-ag101/
-F: include/configs/adp-ag101.h
-F: configs/adp-ag101_defconfig
+++ /dev/null
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := adp-ag101.o
+++ /dev/null
-Andes Technology SoC AG101
-==========================
-
-AG101 is the first SoC produced by Andes Technology using N1213 CPU core.
-AG101 has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-ADP-AG101
-=========
-
-ADP-AG101 is the SoC with AG101 hardcore CPU.
-
-Please check http://www.andestech.com/p2-4.htm for detail of this SoC.
-
-Configurations
-==============
-
-CONFIG_MEM_REMAP:
- Doing memory remap is essential for preparing some non-OS or RTOS
- applications.
-
- This is also a must on ADP-AG101 board.
- (While other boards may not have this problem).
-
- The reason is because the ROM/FLASH circuit on PCB board.
- AG101-A0 board has 2 jumpers MA17 and SW5 to configure which
- ROM/FLASH is used to boot.
-
- When SW5 = "0101", MA17 = LO, the ROM is connected to BANK0,
- and the FLASH is connected to BANK1.
- When SW5 = "1010", MA17 = HI, the ROM is disabled (still at BANK0),
- and the FLASH is connected to BANK0.
- It will occur problem when doing flash probing if the flash is at
- BANK0 (0x00000000) while memory remapping was skipped.
-
- Other board like ADP-AG101P may not enable this since there is only
- a FLASH connected to bank0.
-
-CONFIG_SKIP_LOWLEVEL_INIT:
- If you want to boot this system from FLASH and bypass e-bios (the
- other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
- in "include/configs/adp-ag101.h".
-
-Build and boot steps
-====================
-
-build:
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make adp-ag101` in u-boot root to build the image.
-
-burn u-boot to flash:
-1. Make sure the MA17 (J16) is Lo.
-2. Make sure the dip switch SW5 is set to "0101".
-3. Power On. Press button "S1", then press button "SW1", then you will found the
- debug LED show 67 means the system successfully booted into e-bios.
- Now you can control the e-bios boot loader from your console.
-4. Under "Command>>" prompt, enter "97" (CopyImageFromCard)
-5. Under "Type Dir Name of [CF/SD] =>" promtp, enter "c".
-6. Under "Enter Filename =>" prompt, enter the file name of u-boot image you
- just build. It is usually "u-boot.bin".
-7. Under "Enter Dest. Address =>" prompt, enter the memory address where you
- want to put the binary from SD card to RAM.
- Address "0x500000" is our suggestion.
-8. Under "Command>>" prompt again, enter "55" (CLI) to use interactive command
- environment.
-9. Under "CLI>" prompt, enter "burn 0x500000 0x80400000 0x30000" to burn the
- binary from RAM to FLASH.
-10. Under "CLI>" prompt, enter "exit" to finish the burn process.
-
-boot u-boot from flash:
-1. Make sure the MA17 (J16) is Hi).
-2. Make sure the dip switch SW5 is set to "1010".
-3. Power On. Press button "S1", then you will see the debug LED count to 20.
-4. Now you can use u-boot on ADP-AG101 board.
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftsdc010.h>
-#include <faraday/ftsmc020.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initializations
- */
-
-int board_init(void)
-{
- /*
- * refer to BOOT_PARAMETER_PA_BASE within
- * "linux/arch/nds32/include/asm/misc_spec.h"
- */
- gd->bd->bi_arch_number = MACH_TYPE_ADPAG101;
- gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
-
- ftsmc020_init(); /* initialize Flash */
- return 0;
-}
-
-int dram_init(void)
-{
- unsigned long sdram_base = PHYS_SDRAM_0;
- unsigned long expected_size = PHYS_SDRAM_0_SIZE + PHYS_SDRAM_1_SIZE;
- unsigned long actual_size;
-
- actual_size = get_ram_size((void *)sdram_base, expected_size);
-
- gd->ram_size = actual_size;
-
- if (expected_size != actual_size) {
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
- }
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_0;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_0_SIZE;
- gd->bd->bi_dram[1].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[1].size = PHYS_SDRAM_1_SIZE;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ftmac100_initialize(bd);
-}
-
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->interface = FLASH_CFI_X8;
- return 1;
- } else {
- return 0;
- }
-}
-
-int board_mmc_init(bd_t *bis)
-{
- ftsdc010_mmc_init(0);
- return 0;
-}
+++ /dev/null
-if TARGET_ADP_AG102
-
-config SYS_CPU
- default "n1213"
-
-config SYS_BOARD
- default "adp-ag102"
-
-config SYS_VENDOR
- default "AndesTech"
-
-config SYS_SOC
- default "ag102"
-
-config SYS_CONFIG_NAME
- default "adp-ag102"
-
-endif
+++ /dev/null
-ADP-AG102 BOARD
-M: Andes <uboot@andestech.com>
-S: Maintained
-F: board/AndesTech/adp-ag102/
-F: include/configs/adp-ag102.h
-F: configs/adp-ag102_defconfig
+++ /dev/null
-#
-# Copyright (C) 2011 Andes Technology Corporation
-# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := adp-ag102.o
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/io.h>
-
-#include <faraday/ftpci100.h>
-#include <faraday/ftsdc010.h>
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initializations
- */
-
-int board_init(void)
-{
- /*
- * refer to BOOT_PARAMETER_PA_BASE within
- * "linux/arch/nds32/include/asm/misc_spec.h"
- */
- gd->bd->bi_arch_number = MACH_TYPE_ADPAG102;
- gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400;
-
-#if !defined(CONFIG_SYS_NO_FLASH)
- ftsmc020_init(); /* initialize Flash */
-#endif /* CONFIG_SYS_NO_FLASH */
- return 0;
-}
-
-int dram_init(void)
-{
- unsigned long sdram_base = PHYS_SDRAM_0;
- unsigned long expected_size = PHYS_SDRAM_0_SIZE;
- unsigned long actual_size;
-
- actual_size = get_ram_size((void *)sdram_base, expected_size);
-
- gd->ram_size = actual_size;
-
- if (expected_size != actual_size) {
- printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
- actual_size >> 20, expected_size >> 20);
- }
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ftgmac100_initialize(bd);
-}
-
-#if !defined(CONFIG_SYS_NO_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = FLASH_CFI_8BIT;
- info->chipwidth = FLASH_CFI_BY8;
- info->interface = FLASH_CFI_X8;
- return 1;
- } else {
- return 0;
- }
-}
-#endif /* CONFIG_SYS_NO_FLASH */
-
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-void pci_init_board(void)
-{
- /* should be pci_ftpci100_init() */
- pci_ftpci_init();
-}
-#endif
-
-#ifdef CONFIG_GENERIC_MMC
-int board_mmc_init(bd_t *bis)
-{
- ftsdc010_mmc_init(0);
- return 0;
-}
-#endif
+++ /dev/null
-CONFIG_NDS32=y
-CONFIG_TARGET_ADP_AG101=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_PROMPT="NDS32 # "
+++ /dev/null
-CONFIG_NDS32=y
-CONFIG_TARGET_ADP_AG102=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SYS_PROMPT="NDS32 # "
+++ /dev/null
-Andes Technology SoC AG102
-==========================
-
-AG102 is the second SoC produced by Andes Technology using N1213 CPU core
-with FPU and DDR contoller support.
-AG102 has integrated both AHB and APB bus and many periphals for application
-and product development.
-
-ADP-AG102
-=========
-
-ADP-AG102 is the SoC with AG102 hardcore CPU.
-
-Configurations
-==============
-
-CONFIG_MEM_REMAP:
- Doing memory remap is essential for preparing some non-OS or RTOS
- applications.
-
-CONFIG_SKIP_LOWLEVEL_INIT:
- If you want to boot this system from SPI ROM and bypass e-bios (the
- other boot loader on ROM). You should undefine CONFIG_SKIP_LOWLEVEL_INIT
- in "include/configs/adp-ag102.h".
-
-Build and boot steps
-====================
-
-build:
-1. Prepare the toolchains and make sure the $PATH to toolchains is correct.
-2. Use `make adp-ag102` in u-boot root to build the image.
-
-Burn u-boot to SPI ROM:
-====================
-
-This section will be added later.
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ag101/ag101.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_ADP_AG101
-
-#define CONFIG_USE_INTERRUPT
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG /* send initrd params */
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MEM_REMAP
-#endif
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE 0x03200000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-#endif
-
-/*
- * Timer
- */
-#define CONFIG_SYS_CLK_FREQ 48000000
-#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL 0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ (5*1000000)
-#define OSC_CLK (2*OSC_5MHZ)
-#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_CLK ((46080000 * 20) / 25) /* AG101 */
-
-/*
- * Ethernet
- */
-#define CONFIG_FTMAC100
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * SD (MMC) controller
- */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER 1
-#define CONFIG_FTSDC010_SDIO
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-/* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
-#define CONFIG_SYS_MALLOC_LEN (512 << 10)
-
-/*
- * AHB Controller configuration
- */
-#define CONFIG_FTAHBC020S
-
-#ifdef CONFIG_FTAHBC020S
-#include <faraday/ftahbc020s.h>
-
-/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
-
-/*
- * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
- * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
- * in C language.
- */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
- (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
- FTAHBC020S_SLAVE_BSR_SIZE(0xb))
-#endif
-
-/*
- * Watchdog
- */
-#define CONFIG_FTWDT010_WATCHDOG
-
-/*
- * PMU Power controller configuration
- */
-#define CONFIG_PMU
-#define CONFIG_FTPMU010_POWER
-
-#ifdef CONFIG_FTPMU010_POWER
-#include <faraday/ftpmu010.h>
-#define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E
-#define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \
- FTPMU010_SDRAMHTC_EBIDATA_DCSR | \
- FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \
- FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \
- FTPMU010_SDRAMHTC_CKE_DCSR | \
- FTPMU010_SDRAMHTC_DQM_DCSR | \
- FTPMU010_SDRAMHTC_SDCLK_DCSR)
-#endif
-
-/*
- * SDRAM controller configuration
- */
-#define CONFIG_FTSDMC021
-
-#ifdef CONFIG_FTSDMC021
-#include <faraday/ftsdmc021.h>
-
-#define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRP(1) | \
- FTSDMC021_TP1_TRCD(1) | \
- FTSDMC021_TP1_TRF(3) | \
- FTSDMC021_TP1_TWR(1) | \
- FTSDMC021_TP1_TCL(2))
-
-#define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \
- FTSDMC021_TP2_INI_REFT(8) | \
- FTSDMC021_TP2_REF_INTV(0x180))
-
-/*
- * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S,
- * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in
- * C language.
- */
-#define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \
- FTSDMC021_CR1_DSZ(3) | \
- FTSDMC021_CR1_MBW(2) | \
- FTSDMC021_CR1_BNKSIZE(6))
-
-#define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \
- FTSDMC021_CR2_IREF | \
- FTSDMC021_CR2_ISMR)
-
-#define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE
-#define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \
- CONFIG_SYS_FTSDMC021_BANK0_BASE)
-
-#define CONFIG_SYS_FTSDMC021_BANK1_BASE \
- (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20))
-#define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \
- CONFIG_SYS_FTSDMC021_BANK1_BASE)
-
-#endif
-
-/*
- * Physical Memory Map
- */
-#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-#if defined(CONFIG_MEM_REMAP)
-#define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/
-#endif
-#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
-#define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */
-#endif
-#define PHYS_SDRAM_1 \
- (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
-
-#define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
-#define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
-
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
- GENERATED_GBL_DATA_SIZE)
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_MEM_REMAP */
-
-/*
- * Load address and memory test area should agree with
- * arch/nds32/config.mk. Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x300000
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
-
-/*
- * Static memory controller configuration
- */
-#define CONFIG_FTSMC020
-
-#ifdef CONFIG_FTSMC020
-#include <faraday/ftsmc020.h>
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-#else
-#define CONFIG_SYS_FTSMC020_CONFIGS { \
- { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
-}
-#endif
-
-/*
- * There are 2 bank connected to FTSMC020 on ADP-AG101.
- * You can use jumper and switch to force it booted from ROM or FLASH.
- * MA17: Lo, SW5 = "0101": BANK0: ROM, BANK1: FLASH.
- * MA17: Hi, SW5 = "1010": BANK0: FLASH; ROM is disabled.
- */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
-#define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(1) | \
- FTSMC020_TPR_CTW(1) | \
- FTSMC020_TPR_ATI(1) | \
- FTSMC020_TPR_AT2(1) | \
- FTSMC020_TPR_WTC(1) | \
- FTSMC020_TPR_AHT(1) | \
- FTSMC020_TPR_TRNA(1))
-#endif
-
-/*
- * This FTSMC020_BANK0_CONFIG indecates the setting of BANK0.
- * 1. When CONFIG_SKIP_LOWLEVEL_INIT is enabled, BANK0 is EEPROM,
- * Do NOT enable BANK0 in FTSMC020_BANK0_CONFIG under this condition.
- * 2. When CONFIG_SKIP_LOWLEVEL_INIT is undefined, BANK0 is FLASH.
- */
-#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(3) | \
- FTSMC020_TPR_CTW(3) | \
- FTSMC020_TPR_ATI(0xf) | \
- FTSMC020_TPR_AT2(3) | \
- FTSMC020_TPR_WTC(3) | \
- FTSMC020_TPR_AHT(3) | \
- FTSMC020_TPR_TRNA(0xf))
-
-#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \
- FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
- FTSMC020_BANK_SIZE_32M | \
- FTSMC020_BANK_MBW_32)
-
-#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_RBE | \
- FTSMC020_TPR_AST(1) | \
- FTSMC020_TPR_CTW(1) | \
- FTSMC020_TPR_ATI(1) | \
- FTSMC020_TPR_AT2(1) | \
- FTSMC020_TPR_WTC(1) | \
- FTSMC020_TPR_AHT(1) | \
- FTSMC020_TPR_TRNA(1))
-#endif /* CONFIG_FTSMC020 */
-
-/*
- * FLASH and environment organization
- */
-/* use CFI framework */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-/* support JEDEC */
-
-/* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define PHYS_FLASH_1 0x80400000 /* BANK 1 */
-#else /* !CONFIG_SKIP_LOWLEVEL_INIT */
-#ifdef CONFIG_MEM_REMAP
-#define PHYS_FLASH_1 0x80000000 /* BANK 0 */
-#else
-#define PHYS_FLASH_1 0x00000000 /* BANK 0 */
-#endif /* CONFIG_MEM_REMAP */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
-
-/* max number of memory banks */
-/*
- * There are 4 banks supported for this Controller,
- * but we have only 1 bank connected to flash on board
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-
-/* max number of sectors on one chip */
-#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2)
-#define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-/* environments */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 8192
-#define CONFIG_ENV_OVERWRITE
-
-#endif /* __CONFIG_H */
+++ /dev/null
-/*
- * Copyright (C) 2011 Andes Technology Corporation
- * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <asm/arch-ag102/ag102.h>
-
-/*
- * CPU and Board Configuration Options
- */
-#define CONFIG_ADP_AG102
-
-#define CONFIG_USE_INTERRUPT
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_MEM_REMAP
-#endif
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_TEXT_BASE 0x04200000
-#else
-#define CONFIG_SYS_TEXT_BASE 0x00000000
-#endif
-
-/*
- * Timer
- */
-#define CONFIG_SYS_CLK_FREQ (66000000 * 2)
-#define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
-
-/*
- * Use Externel CLOCK or PCLK
- */
-#undef CONFIG_FTRTC010_EXTCLK
-
-#ifndef CONFIG_FTRTC010_EXTCLK
-#define CONFIG_FTRTC010_PCLK
-#endif
-
-#ifdef CONFIG_FTRTC010_EXTCLK
-#define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
-#else
-#define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
-#endif
-
-#define TIMER_LOAD_VAL 0xffffffff
-
-/*
- * Real Time Clock
- */
-#define CONFIG_RTC_FTRTC010
-
-/*
- * Real Time Clock Divider
- * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
- */
-#define OSC_5MHZ (5*1000000)
-#define OSC_CLK (2*OSC_5MHZ)
-#define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
-
-/*
- * Serial console configuration
- */
-
-/* FTUART is a high speed NS 16C550A compatible UART */
-#define CONFIG_BAUDRATE 38400
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_01_BASE
-#define CONFIG_SYS_NS16550_REG_SIZE -4
-#define CONFIG_SYS_NS16550_CLK 33000000 /* AG102 */
-
-/*
- * Ethernet
- */
-#define CONFIG_PHY_MAX_ADDR 32 /* this comes from <linux/phy.h> */
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_FTGMAC100
-#define CONFIG_FTGMAC100_EGIGA
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * SD (MMC) controller
- */
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_FTSDC010
-#define CONFIG_FTSDC010_NUMBER 1
-#define CONFIG_FTSDC010_SDIO
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_ELF
-
-
-/*
- * PCI
- */
-#define CONFIG_PCI
-#define CONFIG_FTPCI100
-#define CONFIG_PCI_INDIRECT_BRIDGE
-#define CONFIG_FTPCI100_MEM_BASE 0xa0000000
-#define CONFIG_FTPCI100_IO_SIZE FTPCI100_BASE_IO_SIZE(256) /* 256M */
-#define CONFIG_FTPCI100_MEM_SIZE FTPCI100_MEM_SIZE(128) /* 128M */
-#define CONFIG_FTPCI100_MEM_BASE_SIZE1 0x50
-
-#define CONFIG_PCI_MEM_BUS 0xa0000000
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x01000000 /* 256M */
-
-#define CONFIG_PCI_IO_BUS 0x90000000
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x00100000 /* 1M */
-
-/*
- * USB
- */
-#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI)
-#if defined(CONFIG_FTPCI100)
-#define __io /* enable outl & inl */
-#define CONFIG_CMD_USB
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 5
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI
-#define CONFIG_PCI_EHCI_DEVICE 0
-#define CONFIG_USB_EHCI_PCI
-#define CONFIG_PREBOOT "usb start;"
-#endif /* #if defiend(CONFIG_FTPCI100) */
-#endif /* #if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) */
-
-/*
- * IDE/ATA stuff
- */
-#define __io
-#define CONFIG_IDE_AHB
-#define CONFIG_IDE_FTIDE020
-
-#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
-#undef CONFIG_IDE_LED /* no led for ide supported */
-#define CONFIG_IDE_RESET 1 /* reset for ide supported */
-#define CONFIG_IDE_PREINIT 1 /* preinit for ide */
-
-/* max: 2 IDE busses */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* origin: 2 */
-/* max: 2 drives per IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* origin: (MAXBUS * 2) */
-
-#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_FTIDE020S_BASE
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
-#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0000
-
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* for data I/O */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* for normal regs access */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0000 /* for alternate regs */
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-#define CONFIG_SUPPORT_VFAT
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE \
- (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* max number of command args */
-#define CONFIG_SYS_MAXARGS 16
-
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
-
-/*
- * AHB Controller configuration
- */
-#define CONFIG_FTAHBC020S
-
-#ifdef CONFIG_FTAHBC020S
-#include <faraday/ftahbc020s.h>
-
-/* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100
-
-/*
- * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S,
- * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote
- * in C language.
- */
-#define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \
- (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \
- FTAHBC020S_SLAVE_BSR_SIZE(0xb))
-#endif
-
-/*
- * Watchdog
- */
-#define CONFIG_FTWDT010_WATCHDOG
-
-/*
- * PCU Power Control Unit configuration
- */
-#define CONFIG_ANDES_PCU
-
-#ifdef CONFIG_ANDES_PCU
-#include <andestech/andes_pcu.h>
-
-#endif
-
-/*
- * DDR DRAM controller configuration
- */
-#define CONFIG_DWCDDR21MCTL
-
-#ifdef CONFIG_DWCDDR21MCTL
-#include <synopsys/dwcddr21mctl.h>
-/* DCR:
- * 2GB: 0x000025d2, 2GB (1Gb x8 2 ranks) Micron/innoDisk/Transcend
- * 1GB: 0x000021d2, 1GB (1Gb x8 1 rank) Micron/Transcend/innoDisk
- * 512MB: 0x000025cc, Micron 512MB (512Mb x16 2 ranks)
- * 512MB: 0x000021ca, Trenscend/innoDisk 512MB (512Mb x8 1 rank)
- * 256MB: 0x000020d4, Micron 256MB (1Gb x16 1 ranks)
- */
-#define CONFIG_SYS_DWCDDR21MCTL_CCR 0x00020004
-#define CONFIG_SYS_DWCDDR21MCTL_CCR2 (DWCDDR21MCTL_CCR_DTT(0x1) | \
- DWCDDR21MCTL_CCR_DFTLM(0x4) | \
- DWCDDR21MCTL_CCR_HOSTEN(0x1))
-
-/* 0x04: 0x000020d4 */
-#define CONFIG_SYS_DWCDDR21MCTL_DCR 0x000020ca
-
-/* 0x08: 0x0000000f */
-#define CONFIG_SYS_DWCDDR21MCTL_IOCR 0x0000000f
-
-/* 0x10: 0x00034812 */
-#define CONFIG_SYS_DWCDDR21MCTL_DRR (DWCDDR21MCTL_DRR_TRFC(0x12) | \
- DWCDDR21MCTL_DRR_TRFPRD(0x0348))
-/* 0x24 */
-#define CONFIG_SYS_DWCDDR21MCTL_DLLCR0 DWCDDR21MCTL_DLLCR_PHASE(0x0)
-
-/* 0x4c: 0x00000040 */
-#define CONFIG_SYS_DWCDDR21MCTL_RSLR0 0x00000040
-
-/* 0x5c: 0x000055CF */
-#define CONFIG_SYS_DWCDDR21MCTL_RDGR0 0x000055cf
-
-/* 0xa4: 0x00100000 */
-#define CONFIG_SYS_DWCDDR21MCTL_DTAR (DWCDDR21MCTL_DTAR_DTBANK(0x0) | \
- DWCDDR21MCTL_DTAR_DTROW(0x0100) | \
- DWCDDR21MCTL_DTAR_DTCOL(0x0))
-/* 0x1f0: 0x00000852 */
-#define CONFIG_SYS_DWCDDR21MCTL_MR (DWCDDR21MCTL_MR_WR(0x4) | \
- DWCDDR21MCTL_MR_CL(0x5) | \
- DWCDDR21MCTL_MR_BL(0x2))
-#endif
-
-/*
- * Physical Memory Map
- */
-#if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT)
-#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
-#if defined(CONFIG_MEM_REMAP)
-#define PHYS_SDRAM_0_AT_INIT 0x80000000 /* SDRAM Bank #1 before remap*/
-#endif
-#else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */
-#define PHYS_SDRAM_0 0x80000000 /* SDRAM Bank #1 */
-#endif
-
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_0_SIZE 0x10000000 /* 256 MB */
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
-
-#ifdef CONFIG_MEM_REMAP
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
- GENERATED_GBL_DATA_SIZE)
-#else
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
- GENERATED_GBL_DATA_SIZE)
-#endif /* CONFIG_MEM_REMAP */
-
-/*
- * Load address and memory test area should agree with
- * board/faraday/a320/config.mk
- * Be careful not to overwrite U-boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x0CF00000
-
-/* memtest works on 63 MB in DRAM */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
-
-/*
- * Static memory controller configuration
- */
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_NO_FLASH
-
-/*
- * Env Storage Settings
- */
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE 4096
-
-#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff