]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
usb_stor_BBB_transport: Do not delay when not required
authorBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Fri, 10 Aug 2012 16:27:11 +0000 (18:27 +0200)
committerMarek Vasut <marex@denx.de>
Sat, 1 Sep 2012 14:21:52 +0000 (16:21 +0200)
There is a 5-ms delay in usb_stor_BBB_transport, which occurs every 10 kiB of
data for fragmented fatload usb, i.e. roughly 500 ms of delay per MiB. This adds
up to quite a bit of delay if you're loading a large ramdisk.

The purpose of this delay should be to debounce the 5-V/100-mA USB power up.
This patch skips the delay if the device has already been queried as ready.

Signed-off-by: Jim Shimer <mgi2475@motorola.com>
Rework following the review:
 - Rebase against the latest u-boot-usb master.
 - Replace typedef with #define.
 - Use the existing flags struct field instead of adding a new field.
 - Remove the setter function.
 - Remove the typecasts.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Ilya Yanok <ilya.yanok@cogentembedded.com>
Cc: Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
Cc: Jim Shimer <mgi2475@motorola.com>
common/usb_storage.c

index 099edd3fa6c74f47992158360f9366e81f45b0ce..ccfe811eebbd03863d1529a263bfd4575dfd07b8 100644 (file)
@@ -136,6 +136,7 @@ struct us_data {
        struct usb_device *pusb_dev;     /* this usb_device */
 
        unsigned int    flags;                  /* from filter initially */
+#      define USB_READY        (1 << 0)
        unsigned char   ifnum;                  /* interface number */
        unsigned char   ep_in;                  /* in endpoint */
        unsigned char   ep_out;                 /* out ....... */
@@ -698,7 +699,8 @@ int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
                usb_stor_BBB_reset(us);
                return USB_STOR_TRANSPORT_FAILED;
        }
-       mdelay(5);
+       if (!(us->flags & USB_READY))
+               mdelay(5);
        pipein = usb_rcvbulkpipe(us->pusb_dev, us->ep_in);
        pipeout = usb_sndbulkpipe(us->pusb_dev, us->ep_out);
        /* DATA phase + error handling */
@@ -963,8 +965,10 @@ static int usb_test_unit_ready(ccb *srb, struct us_data *ss)
                srb->cmd[1] = srb->lun << 5;
                srb->datalen = 0;
                srb->cmdlen = 12;
-               if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD)
+               if (ss->transport(srb, ss) == USB_STOR_TRANSPORT_GOOD) {
+                       ss->flags |= USB_READY;
                        return 0;
+               }
                usb_request_sense(srb, ss);
                mdelay(100);
        } while (retries--);
@@ -1114,6 +1118,7 @@ retry_it:
                blks -= smallblks;
                buf_addr += srb->datalen;
        } while (blks != 0);
+       ss->flags &= ~USB_READY;
 
        USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
                        start, smallblks, buf_addr);
@@ -1193,6 +1198,7 @@ retry_it:
                blks -= smallblks;
                buf_addr += srb->datalen;
        } while (blks != 0);
+       ss->flags &= ~USB_READY;
 
        USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
                        start, smallblks, buf_addr);
@@ -1404,6 +1410,7 @@ int usb_stor_get_info(struct usb_device *dev, struct us_data *ss,
                cap[0] = 2880;
                cap[1] = 0x200;
        }
+       ss->flags &= ~USB_READY;
        USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n", cap[0],
                        cap[1]);
 #if 0