Merge branch 'master' of git://git.denx.de/u-boot-video

diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c
index 6b3e095ba89bcb96ae5c7b8e3708ca7b92787bd2..16d442aa625f344e9674df812f1f195625d9891f 100644 (file)
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi_b/rpi_b.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2012 Stephen Warren
+ * (C) Copyright 2012-2013 Stephen Warren
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -15,6 +15,8 @@
  */
 
 #include <common.h>
+#include <config.h>
+#include <lcd.h>
 #include <asm/arch/mbox.h>
 #include <asm/arch/sdhci.h>
 #include <asm/global_data.h>
@@ -77,3 +79,13 @@ int board_mmc_init(void)
        return bcm2835_sdhci_init(BCM2835_SDHCI_BASE,
                                  msg_clk->get_clock_rate.body.resp.rate_hz);
 }
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+       /*
+        * For now, we simply always add the simplefb DT node. Later, we
+        * should be more intelligent, and e.g. only do this if no enabled DT
+        * node exists for the "real" graphics driver.
+        */
+       lcd_dt_simplefb_add_node(blob);
+}

diff --git a/common/lcd.c b/common/lcd.c
index edae835fb0be1e6eb1fccdbf373b42dfc588ee31..3a60484eea615a4f20bd78109f738de26478c88f 100644 (file)
--- a/common/lcd.c
+++ b/common/lcd.c
@@ -57,6 +57,10 @@
 #include <atmel_lcdc.h>
 #endif
 
+#if defined(CONFIG_LCD_DT_SIMPLEFB)
+#include <libfdt.h>
+#endif
+
 /************************************************************************/
 /* ** FONT DATA                                                                */
 /************************************************************************/
@@ -1182,3 +1186,86 @@ int lcd_get_screen_columns(void)
 {
        return CONSOLE_COLS;
 }
+
+#if defined(CONFIG_LCD_DT_SIMPLEFB)
+static int lcd_dt_simplefb_configure_node(void *blob, int off)
+{
+       u32 stride;
+       fdt32_t cells[2];
+       int ret;
+       const char format[] =
+#if LCD_BPP == LCD_COLOR16
+               "r5g6b5";
+#else
+               "";
+#endif
+
+       if (!format[0])
+               return -1;
+
+       stride = panel_info.vl_col * 2;
+
+       cells[0] = cpu_to_fdt32(gd->fb_base);
+       cells[1] = cpu_to_fdt32(stride * panel_info.vl_row);
+       ret = fdt_setprop(blob, off, "reg", cells, sizeof(cells[0]) * 2);
+       if (ret < 0)
+               return -1;
+
+       cells[0] = cpu_to_fdt32(panel_info.vl_col);
+       ret = fdt_setprop(blob, off, "width", cells, sizeof(cells[0]));
+       if (ret < 0)
+               return -1;
+
+       cells[0] = cpu_to_fdt32(panel_info.vl_row);
+       ret = fdt_setprop(blob, off, "height", cells, sizeof(cells[0]));
+       if (ret < 0)
+               return -1;
+
+       cells[0] = cpu_to_fdt32(stride);
+       ret = fdt_setprop(blob, off, "stride", cells, sizeof(cells[0]));
+       if (ret < 0)
+               return -1;
+
+       ret = fdt_setprop(blob, off, "format", format, strlen(format) + 1);
+       if (ret < 0)
+               return -1;
+
+       ret = fdt_delprop(blob, off, "status");
+       if (ret < 0)
+               return -1;
+
+       return 0;
+}
+
+int lcd_dt_simplefb_add_node(void *blob)
+{
+       const char compat[] = "simple-framebuffer";
+       const char disabled[] = "disabled";
+       int off, ret;
+
+       off = fdt_add_subnode(blob, 0, "framebuffer");
+       if (off < 0)
+               return -1;
+
+       ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled));
+       if (ret < 0)
+               return -1;
+
+       ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat));
+       if (ret < 0)
+               return -1;
+
+       return lcd_dt_simplefb_configure_node(blob, off);
+}
+
+int lcd_dt_simplefb_enable_existing_node(void *blob)
+{
+       int off;
+
+       off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer");
+       if (off < 0)
+               return -1;
+
+       return lcd_dt_simplefb_configure_node(blob, off);
+}
+#endif

diff --git a/doc/device-tree-bindings/video/simple-framebuffer.txt b/doc/device-tree-bindings/video/simple-framebuffer.txt
new file mode 100644 (file)
index 0000000..3ea4605
--- /dev/null
+++ b/doc/device-tree-bindings/video/simple-framebuffer.txt
@@ -0,0 +1,25 @@
+Simple Framebuffer
+
+A simple frame-buffer describes a raw memory region that may be rendered to,
+with the assumption that the display hardware has already been set up to scan
+out from that buffer.
+
+Required properties:
+- compatible: "simple-framebuffer"
+- reg: Should contain the location and size of the framebuffer memory.
+- width: The width of the framebuffer in pixels.
+- height: The height of the framebuffer in pixels.
+- stride: The number of bytes in each line of the framebuffer.
+- format: The format of the framebuffer surface. Valid values are:
+  - r5g6b5 (16-bit pixels, d[15:11]=r, d[10:5]=g, d[4:0]=b).
+
+Example:
+
+       framebuffer {
+               compatible = "simple-framebuffer";
+               reg = <0x1d385000 (1600 * 1200 * 2)>;
+               width = <1600>;
+               height = <1200>;
+               stride = <(1600 * 2)>;
+               format = "r5g6b5";
+       };

diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 0793f07f242fe4ca02e1a0c43ac63fed68a847e2..b10f1590ba00ee9505bd09fcbc03d1871d7d2fdb 100644 (file)
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -572,8 +572,6 @@ static void video_drawchars(int xx, int yy, unsigned char *s, int count)
                                        SWAP32((video_font_draw_table32
                                                [bits & 15][3] & eorx) ^ bgx);
                        }
-                       if (cfb_do_flush_cache)
-                               flush_cache((ulong)dest0, 32);
                        dest0 += VIDEO_FONT_WIDTH * VIDEO_PIXEL_SIZE;
                        s++;
                }
@@ -642,8 +640,6 @@ static void video_invertchar(int xx, int yy)
                for (x = firstx; x < lastx; x++) {
                        u8 *dest = (u8 *)(video_fb_address) + x + y;
                        *dest = ~*dest;
-                       if (cfb_do_flush_cache)
-                               flush_cache((ulong)dest, 4);
                }
        }
 }
@@ -687,6 +683,8 @@ void console_cursor(int state)
                }
                cursor_state = state;
        }
+       if (cfb_do_flush_cache)
+               flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
 }
 #endif
 
@@ -739,8 +737,6 @@ static void console_clear_line(int line, int begin, int end)
                        memsetl(offset + i * VIDEO_LINE_LEN, size, bgx);
        }
 #endif
-       if (cfb_do_flush_cache)
-               flush_cache((ulong)CONSOLE_ROW_FIRST, CONSOLE_SIZE);
 }
 
 static void console_scrollup(void)
@@ -1146,6 +1142,8 @@ void video_putc(const char c)
 #else
        parse_putc(c);
 #endif
+       if (cfb_do_flush_cache)
+               flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
 }
 
 void video_puts(const char *s)
@@ -1799,6 +1797,8 @@ int video_display_bitmap(ulong bmp_image, int x, int y)
        }
 #endif
 
+       if (cfb_do_flush_cache)
+               flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
        return (0);
 }
 #endif
@@ -2209,6 +2209,9 @@ static int video_init(void)
        console_col = 0;
        console_row = 0;
 
+       if (cfb_do_flush_cache)
+               flush_cache(VIDEO_FB_ADRS, VIDEO_SIZE);
+
        return 0;
 }
 

diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index c18b35b0578a64e09aa43a66d86371d84779b18b..216c6cb70b92d1496f582baba0521e90c3709076 100644 (file)
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -61,6 +61,7 @@
 #define CONFIG_BCM2835_GPIO
 /* LCD */
 #define CONFIG_LCD
+#define CONFIG_LCD_DT_SIMPLEFB
 #define LCD_BPP                                LCD_COLOR16
 /*
  * Prevent allocation of RAM for FB; the real FB address is queried
@@ -175,6 +176,7 @@
 
 /* Device tree support for bootm/bootz */
 #define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 /* ATAGs support for bootm/bootz */
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_CMDLINE_TAG

diff --git a/include/lcd.h b/include/lcd.h
index c6e7fc5216330c6797e7c28a640a67322766a446..30225edf563fb1212db8e3868e4ef626921affaf 100644 (file)
--- a/include/lcd.h
+++ b/include/lcd.h
@@ -324,6 +324,9 @@ void lcd_show_board_info(void);
 /* Return the size of the LCD frame buffer, and the line length */
 int lcd_get_size(int *line_length);
 
+int lcd_dt_simplefb_add_node(void *blob);
+int lcd_dt_simplefb_enable_existing_node(void *blob);
+
 /************************************************************************/
 /* ** BITMAP DISPLAY SUPPORT                                           */
 /************************************************************************/