* devices. The user data is one time programmable but the factory data is read
* only.
*/
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len)
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf)
{
if (!mtd->_get_fact_prot_info)
return -EOPNOTSUPP;
if (!len)
return 0;
- return mtd->_get_fact_prot_info(mtd, buf, len);
+ return mtd->_get_fact_prot_info(mtd, len, retlen, buf);
}
EXPORT_SYMBOL_GPL(mtd_get_fact_prot_info);
}
EXPORT_SYMBOL_GPL(mtd_read_fact_prot_reg);
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len)
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf)
{
if (!mtd->_get_user_prot_info)
return -EOPNOTSUPP;
if (!len)
return 0;
- return mtd->_get_user_prot_info(mtd, buf, len);
+ return mtd->_get_user_prot_info(mtd, len, retlen, buf);
}
EXPORT_SYMBOL_GPL(mtd_get_user_prot_info);
int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, u_char *buf)
{
+ int ret;
+
*retlen = 0;
if (!mtd->_write_user_prot_reg)
return -EOPNOTSUPP;
if (!len)
return 0;
- return mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+ ret = mtd->_write_user_prot_reg(mtd, to, len, retlen, buf);
+ if (ret)
+ return ret;
+
+ /*
+ * If no data could be written at all, we are out of memory and
+ * must return -ENOSPC.
+ */
+ return (*retlen) ? 0 : -ENOSPC;
}
EXPORT_SYMBOL_GPL(mtd_write_user_prot_reg);
retlen, buf);
}
-static int part_get_user_prot_info(struct mtd_info *mtd,
- struct otp_info *buf, size_t len)
+static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = PART(mtd);
- return part->master->_get_user_prot_info(part->master, buf, len);
+ return part->master->_get_user_prot_info(part->master, len, retlen,
+ buf);
}
static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
retlen, buf);
}
-static int part_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len)
+static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = PART(mtd);
- return part->master->_get_fact_prot_info(part->master, buf, len);
+ return part->master->_get_fact_prot_info(part->master, len, retlen,
+ buf);
}
static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if ((chip->options & NAND_BUSWIDTH_16) &&
+ if (chip->options & NAND_BUSWIDTH_16 &&
!nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
/* Serially input address */
if (column != -1) {
/* Adjust columns for 16 bit buswidth */
- if ((chip->options & NAND_BUSWIDTH_16) &&
+ if (chip->options & NAND_BUSWIDTH_16 &&
!nand_opcode_8bits(command))
column >>= 1;
chip->cmd_ctrl(mtd, column, ctrl);
* @data_offs: offset of requested data within the page
* @readlen: data length
* @bufpoi: buffer to store read data
+ * @page: page number to read
*/
static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi)
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+ int page)
{
int start_step, end_step, num_steps;
uint32_t *eccpos = chip->ecc.layout->eccpos;
int data_col_addr, i, gaps = 0;
int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
- int index = 0;
+ int index;
unsigned int max_bitflips = 0;
/* Column address within the page aligned to ECC size (256bytes) */
start_step = data_offs / chip->ecc.size;
end_step = (data_offs + readlen - 1) / chip->ecc.size;
num_steps = end_step - start_step + 1;
+ index = start_step * chip->ecc.bytes;
/* Data size aligned to ECC ecc.size */
datafrag_len = num_steps * chip->ecc.size;
* Send the command to read the particular ECC bytes take care
* about buswidth alignment in read_buf.
*/
- index = start_step * chip->ecc.bytes;
-
aligned_pos = eccpos[index] & ~(busw - 1);
aligned_len = eccfrag_len;
if (eccpos[index] & (busw - 1))
else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
!oob)
ret = chip->ecc.read_subpage(mtd, chip,
- col, bytes, bufpoi);
+ col, bytes, bufpoi,
+ page);
else
ret = chip->ecc.read_page(mtd, chip, bufpoi,
oob_required, page);
oob += chip->ecc.prepad;
}
- chip->read_buf(mtd, oob, eccbytes);
+ chip->write_buf(mtd, oob, eccbytes);
oob += eccbytes;
if (chip->ecc.postpad) {
}
-#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
/* Sanitize ONFI strings so we can safely print them */
#ifndef __UBOOT__
static void sanitize_string(uint8_t *s, size_t len)
return crc;
}
+#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
/* Parse the Extended Parameter Page. */
static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
struct nand_chip *chip, struct nand_onfi_params *p)
chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
return 0;
- /*
- * ONFI must be probed in 8-bit mode or with NAND_BUSWIDTH_AUTO, not
- * with NAND_BUSWIDTH_16
- */
- if (chip->options & NAND_BUSWIDTH_16) {
- pr_err("ONFI cannot be probed in 16-bit mode; aborting\n");
- return 0;
- }
-
chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
for (i = 0; i < 3; i++) {
for (j = 0; j < sizeof(*p); j++)
}
#endif
+/*
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+ int *busw)
+{
+ struct nand_jedec_params *p = &chip->jedec_params;
+ struct jedec_ecc_info *ecc;
+ int val;
+ int i, j;
+
+ /* Try JEDEC for unknown chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+ if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'C')
+ return 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+ for (i = 0; i < 3; i++) {
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+ le16_to_cpu(p->crc))
+ break;
+ }
+
+ if (i == 3) {
+ pr_err("Could not find valid JEDEC parameter page; aborting\n");
+ return 0;
+ }
+
+ /* Check version */
+ val = le16_to_cpu(p->revision);
+ if (val & (1 << 2))
+ chip->jedec_version = 10;
+ else if (val & (1 << 1))
+ chip->jedec_version = 1; /* vendor specific version */
+
+ if (!chip->jedec_version) {
+ pr_info("unsupported JEDEC version: %d\n", val);
+ return 0;
+ }
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
+
+ if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+ *busw = NAND_BUSWIDTH_16;
+ else
+ *busw = 0;
+
+ /* ECC info */
+ ecc = &p->ecc_info[0];
+
+ if (ecc->codeword_size >= 9) {
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
+ } else {
+ pr_warn("Invalid codeword size\n");
+ }
+
+ return 1;
+}
+
/*
* nand_id_has_period - Check if an ID string has a given wraparound period
* @id_data: the ID string
*/
static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
struct nand_chip *chip,
- int busw,
int *maf_id, int *dev_id,
struct nand_flash_dev *type)
{
+ int busw;
int i, maf_idx;
u8 id_data[8];
/* Check is chip is ONFI compliant */
if (nand_flash_detect_onfi(mtd, chip, &busw))
goto ident_done;
+
+ /* Check if the chip is JEDEC compliant */
+ if (nand_flash_detect_jedec(mtd, chip, &busw))
+ goto ident_done;
}
if (!type->name)
pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
*maf_id, *dev_id);
+
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
- pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
- chip->onfi_version ? chip->onfi_params.model : type->name);
+ if (chip->onfi_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->onfi_params.model);
+ else if (chip->jedec_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->jedec_params.model);
+ else
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ type->name);
#else
- pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, type->name);
+ if (chip->jedec_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->jedec_params.model);
+ else
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ type->name);
+
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ type->name);
#endif
+
pr_info("%dMiB, %s, page size: %d, OOB size: %d\n",
(int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
mtd->writesize, mtd->oobsize);
int nand_scan_ident(struct mtd_info *mtd, int maxchips,
struct nand_flash_dev *table)
{
- int i, busw, nand_maf_id, nand_dev_id;
+ int i, nand_maf_id, nand_dev_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
- /* Get buswidth to select the correct functions */
- busw = chip->options & NAND_BUSWIDTH_16;
/* Set the default functions */
- nand_set_defaults(chip, busw);
+ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
/* Read the flash type */
- type = nand_get_flash_type(mtd, chip, busw,
- &nand_maf_id, &nand_dev_id, table);
+ type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+ &nand_dev_id, table);
if (IS_ERR(type)) {
if (!(chip->options & NAND_SCAN_SILENT_NODEV))
int i;
struct nand_chip *chip = mtd->priv;
struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_buffers *nbuf;
/* New bad blocks should be marked in OOB, flash-based BBT, or both */
BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
!(chip->bbt_options & NAND_BBT_USE_FLASH));
- if (!(chip->options & NAND_OWN_BUFFERS))
- chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
- if (!chip->buffers)
- return -ENOMEM;
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+#ifndef __UBOOT__
+ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+ + mtd->oobsize * 3, GFP_KERNEL);
+ if (!nbuf)
+ return -ENOMEM;
+ nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+ nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+#else
+ nbuf = kzalloc(sizeof(struct nand_buffers), GFP_KERNEL);
+#endif
+
+ chip->buffers = nbuf;
+ } else {
+ if (!chip->buffers)
+ return -ENOMEM;
+ }
/* Set the internal oob buffer location, just after the page data */
chip->oob_poi = chip->buffers->databuf + mtd->writesize;
case NAND_ECC_SOFT_BCH:
if (!mtd_nand_has_bch()) {
- pr_warn("CONFIG_MTD_ECC_BCH not enabled\n");
+ pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
BUG();
}
ecc->calculate = nand_bch_calculate_ecc;
{"TC58NVG6D2 64G 3.3V 8-bit",
{ .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+ {"SDTNRGAMA 64G 3.3V 8-bit",
+ { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+ SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
}
}
+ err = ubiblock_init();
+ if (err) {
+ ubi_err("block: cannot initialize, error %d", err);
+
+ /* See comment above re-ubi_is_module(). */
+ if (ubi_is_module())
+ goto out_detach;
+ }
+
return 0;
out_detach:
{
int i;
+ ubiblock_exit();
+
for (i = 0; i < UBI_MAX_DEVICES; i++)
if (ubi_devices[i]) {
mutex_lock(&ubi_devices_mutex);
#define __UBOOT__
#ifndef __UBOOT__
-#include <linux/init.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/rbtree.h>
int ubi_scan_fastmap(struct ubi_device *ubi, struct ubi_attach_info *ai,
int fm_anchor);
+/* block.c */
+#ifdef CONFIG_MTD_UBI_BLOCK
+int ubiblock_init(void);
+void ubiblock_exit(void);
+int ubiblock_create(struct ubi_volume_info *vi);
+int ubiblock_remove(struct ubi_volume_info *vi);
+#else
+static inline int ubiblock_init(void) { return 0; }
+static inline void ubiblock_exit(void) {}
+static inline int ubiblock_create(struct ubi_volume_info *vi)
+{
+ return -ENOSYS;
+}
+static inline int ubiblock_remove(struct ubi_volume_info *vi)
+{
+ return -ENOSYS;
+}
+#endif
+
+
/*
* ubi_rb_for_each_entry - walk an RB-tree.
* @rb: a pointer to type 'struct rb_node' to use as a loop counter
e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF);
self_check_in_wl_tree(ubi, e, &ubi->free);
+ ubi->free_count--;
+ ubi_assert(ubi->free_count >= 0);
rb_erase(&e->u.rb, &ubi->free);
return e;
peb = __wl_get_peb(ubi);
spin_unlock(&ubi->wl_lock);
+ if (peb < 0)
+ return peb;
+
err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset,
ubi->peb_size - ubi->vid_hdr_aloffset);
if (err) {
/* Give the unused PEB back */
wl_tree_add(e2, &ubi->free);
+ ubi->free_count++;
goto out_cancel;
}
self_check_in_wl_tree(ubi, e1, &ubi->used);
dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode);
ubifs_assert(!atomic_read(&inode->i_count));
- truncate_inode_pages(&inode->i_data, 0);
+ truncate_inode_pages_final(&inode->i_data);
if (inode->i_nlink)
goto done;
if (c->space_fixup) {
err = ubifs_fixup_free_space(c);
if (err)
- return err;
+ goto out;
}
err = check_free_space(c);
int err;
struct ubifs_info *c = sb->s_fs_info;
+ sync_filesystem(sb);
dbg_gen("old flags %#lx, new flags %#x", sb->s_flags, *flags);
err = ubifs_parse_options(c, data, 1);
struct mtd_oob_ops *ops);
int (*_write_oob) (struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops);
- int (*_get_fact_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+ int (*_get_fact_prot_info) (struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf);
int (*_read_fact_prot_reg) (struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf);
- int (*_get_user_prot_info) (struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+ int (*_get_user_prot_info) (struct mtd_info *mtd, size_t len,
+ size_t *retlen, struct otp_info *buf);
int (*_read_user_prot_reg) (struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf);
int (*_write_user_prot_reg) (struct mtd_info *mtd, loff_t to,
return mtd->_write_oob(mtd, to, ops);
}
-int mtd_get_fact_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf);
int mtd_read_fact_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
-int mtd_get_user_prot_info(struct mtd_info *mtd, struct otp_info *buf,
- size_t len);
+int mtd_get_user_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
+ struct otp_info *buf);
int mtd_read_user_prot_reg(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf);
int mtd_write_user_prot_reg(struct mtd_info *mtd, loff_t to, size_t len,
/* The maximum number of NAND chips in an array */
#define NAND_MAX_CHIPS 8
-#endif
-
+#else
/*
* This constant declares the max. oobsize / page, which
* is supported now. If you add a chip with bigger oobsize/page
* adjust this accordingly.
*/
-#define NAND_MAX_OOBSIZE 744
-#define NAND_MAX_PAGESIZE 8192
+#define NAND_MAX_OOBSIZE 744
+#define NAND_MAX_PAGESIZE 8192
+#endif
/*
* Constants for hardware specific CLE/ALE/NCE function
u8 param_revision;
} __packed;
+struct jedec_ecc_info {
+ u8 ecc_bits;
+ u8 codeword_size;
+ __le16 bb_per_lun;
+ __le16 block_endurance;
+ u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS (1 << 0)
+
+struct nand_jedec_params {
+ /* rev info and features block */
+ /* 'J' 'E' 'S' 'D' */
+ u8 sig[4];
+ __le16 revision;
+ __le16 features;
+ u8 opt_cmd[3];
+ __le16 sec_cmd;
+ u8 num_of_param_pages;
+ u8 reserved0[18];
+
+ /* manufacturer information block */
+ char manufacturer[12];
+ char model[20];
+ u8 jedec_id[6];
+ u8 reserved1[10];
+
+ /* memory organization block */
+ __le32 byte_per_page;
+ __le16 spare_bytes_per_page;
+ u8 reserved2[6];
+ __le32 pages_per_block;
+ __le32 blocks_per_lun;
+ u8 lun_count;
+ u8 addr_cycles;
+ u8 bits_per_cell;
+ u8 programs_per_page;
+ u8 multi_plane_addr;
+ u8 multi_plane_op_attr;
+ u8 reserved3[38];
+
+ /* electrical parameter block */
+ __le16 async_sdr_speed_grade;
+ __le16 toggle_ddr_speed_grade;
+ __le16 sync_ddr_speed_grade;
+ u8 async_sdr_features;
+ u8 toggle_ddr_features;
+ u8 sync_ddr_features;
+ __le16 t_prog;
+ __le16 t_bers;
+ __le16 t_r;
+ __le16 t_r_multi_plane;
+ __le16 t_ccs;
+ __le16 io_pin_capacitance_typ;
+ __le16 input_pin_capacitance_typ;
+ __le16 clk_pin_capacitance_typ;
+ u8 driver_strength_support;
+ __le16 t_ald;
+ u8 reserved4[36];
+
+ /* ECC and endurance block */
+ u8 guaranteed_good_blocks;
+ __le16 guaranteed_block_endurance;
+ struct jedec_ecc_info ecc_info[4];
+ u8 reserved5[29];
+
+ /* reserved */
+ u8 reserved6[148];
+
+ /* vendor */
+ __le16 vendor_rev_num;
+ u8 reserved7[88];
+
+ /* CRC for Parameter Page */
+ __le16 crc;
+} __packed;
+
/**
* struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices
* @lock: protection lock
int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *buf, int oob_required, int page);
int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
- uint32_t offs, uint32_t len, uint8_t *buf);
+ uint32_t offs, uint32_t len, uint8_t *buf, int page);
int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
uint32_t offset, uint32_t data_len,
const uint8_t *data_buf, int oob_required);
/**
* struct nand_buffers - buffer structure for read/write
- * @ecccalc: buffer for calculated ECC
- * @ecccode: buffer for ECC read from flash
- * @databuf: buffer for data - dynamically sized
+ * @ecccalc: buffer pointer for calculated ECC, size is oobsize.
+ * @ecccode: buffer pointer for ECC read from flash, size is oobsize.
+ * @databuf: buffer pointer for data, size is (page size + oobsize).
*
* Do not change the order of buffers. databuf and oobrbuf must be in
* consecutive order.
*/
struct nand_buffers {
#ifndef __UBOOT__
- uint8_t *ecccalc;
- uint8_t *ecccode;
+ uint8_t *ecccalc;
+ uint8_t *ecccode;
uint8_t *databuf;
#else
uint8_t ecccalc[ALIGN(NAND_MAX_OOBSIZE, ARCH_DMA_MINALIGN)];
* @subpagesize: [INTERN] holds the subpagesize
* @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded),
* non 0 if ONFI supported.
+ * @jedec_version: [INTERN] holds the chip JEDEC version (BCD encoded),
+ * non 0 if JEDEC supported.
* @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is
* supported, 0 otherwise.
+ * @jedec_params: [INTERN] holds the JEDEC parameter page when JEDEC is
+ * supported, 0 otherwise.
* @read_retries: [INTERN] the number of read retry modes supported
* @onfi_set_features: [REPLACEABLE] set the features for ONFI nand
* @onfi_get_features: [REPLACEABLE] get the features for ONFI nand
int badblockbits;
int onfi_version;
+ int jedec_version;
#ifdef CONFIG_SYS_NAND_ONFI_DETECTION
struct nand_onfi_params onfi_params;
#endif
-
+ struct nand_jedec_params jedec_params;
+
int read_retries;
flstate_t state;
return 0;
}
+/* return the supported JEDEC features. */
+static inline int jedec_feature(struct nand_chip *chip)
+{
+ return chip->jedec_version ? le16_to_cpu(chip->jedec_params.features)
+ : 0;
+}
+
#ifdef __UBOOT__
/* Standard NAND functions from nand_base.c */
void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len);
* used. A pointer to a &struct ubi_set_vol_prop_req object is expected to be
* passed. The object describes which property should be set, and to which value
* it should be set.
+ *
+ * Block devices on UBI volumes
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * To create a R/O block device on top of an UBI volume the %UBI_IOCVOLCRBLK
+ * should be used. A pointer to a &struct ubi_blkcreate_req object is expected
+ * to be passed, which is not used and reserved for future usage.
+ *
+ * Conversely, to remove a block device the %UBI_IOCVOLRMBLK should be used,
+ * which takes no arguments.
*/
/*
/* Set an UBI volume property */
#define UBI_IOCSETVOLPROP _IOW(UBI_VOL_IOC_MAGIC, 6, \
struct ubi_set_vol_prop_req)
+/* Create a R/O block device on top of an UBI volume */
+#define UBI_IOCVOLCRBLK _IOW(UBI_VOL_IOC_MAGIC, 7, struct ubi_blkcreate_req)
+/* Remove the R/O block device */
+#define UBI_IOCVOLRMBLK _IO(UBI_VOL_IOC_MAGIC, 8)
/* Maximum MTD device name length supported by UBI */
#define MAX_UBI_MTD_NAME_LEN 127
__u64 value;
} __packed;
+/**
+ * struct ubi_blkcreate_req - a data structure used in block creation requests.
+ * @padding: reserved for future, not used, has to be zeroed
+ */
+struct ubi_blkcreate_req {
+ __s8 padding[128];
+} __packed;
+
#endif /* __UBI_USER_H__ */
projects / karo-tx-uboot.git / commitdiff