This commit introduces the initial U-Boot support for QEMU x86 targets.
U-Boot can boot from coreboot as a payload, or directly without coreboot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig
https://patchwork.ozlabs.org/patch/479745/
config VENDOR_COREBOOT
bool "coreboot"
+config VENDOR_EMULATION
+ bool "emulation"
+
config VENDOR_GOOGLE
bool "Google"
# board-specific options below
source "board/coreboot/Kconfig"
+source "board/emulation/Kconfig"
source "board/google/Kconfig"
source "board/intel/Kconfig"
source "arch/x86/cpu/baytrail/Kconfig"
source "arch/x86/cpu/coreboot/Kconfig"
source "arch/x86/cpu/ivybridge/Kconfig"
+source "arch/x86/cpu/qemu/Kconfig"
source "arch/x86/cpu/quark/Kconfig"
source "arch/x86/cpu/queensbay/Kconfig"
obj-$(CONFIG_INTEL_BAYTRAIL) += baytrail/
obj-$(CONFIG_SYS_COREBOOT) += coreboot/
+obj-$(CONFIG_QEMU) += qemu/
obj-$(CONFIG_NORTHBRIDGE_INTEL_SANDYBRIDGE) += ivybridge/
obj-$(CONFIG_NORTHBRIDGE_INTEL_IVYBRIDGE) += ivybridge/
obj-$(CONFIG_INTEL_QUARK) += quark/
--- /dev/null
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+config QEMU
+ bool
+ select TSC_CALIBRATION_BYPASS
+
+if QEMU
+
+config SYS_CAR_ADDR
+ hex
+ default 0xd0000
+
+config SYS_CAR_SIZE
+ hex
+ default 0x10000
+
+endif
--- /dev/null
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += car.o dram.o qemu.o
+obj-$(CONFIG_PCI) += pci.o
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <config.h>
+#include <asm/post.h>
+
+.globl car_init
+car_init:
+ /* Save the BIST result */
+ movl %eax, %ebp
+
+ post_code(POST_CAR_START)
+
+ /*
+ * Since we know we are running inside emulator,
+ * we can do nothing here for CAR initialization.
+ */
+
+ /* Restore the BIST result */
+ movl %ebp, %eax
+
+ post_code(POST_CAR_CPU_CACHE)
+ jmp car_init_ret
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/post.h>
+#include <asm/arch/qemu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+ u32 ram;
+
+ outb(HIGH_RAM_ADDR, CMOS_ADDR_PORT);
+ ram = ((u32)inb(CMOS_DATA_PORT)) << 14;
+ outb(LOW_RAM_ADDR, CMOS_ADDR_PORT);
+ ram |= ((u32)inb(CMOS_DATA_PORT)) << 6;
+ ram += 16 * 1024;
+
+ gd->ram_size = ram * 1024;
+ post_code(POST_DRAM);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = 0;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+
+/*
+ * This function looks for the highest region of memory lower than 4GB which
+ * has enough space for U-Boot where U-Boot is aligned on a page boundary.
+ * It overrides the default implementation found elsewhere which simply
+ * picks the end of ram, wherever that may be. The location of the stack,
+ * the relocation address, and how far U-Boot is moved by relocation are
+ * set in the global data structure.
+ */
+ulong board_get_usable_ram_top(ulong total_size)
+{
+ return gd->ram_size;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <pci.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_pci_setup_hose(struct pci_controller *hose)
+{
+ hose->first_busno = 0;
+ hose->last_busno = 0;
+
+ /* PCI memory space */
+ pci_set_region(hose->regions + 0,
+ CONFIG_PCI_MEM_BUS,
+ CONFIG_PCI_MEM_PHYS,
+ CONFIG_PCI_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* PCI IO space */
+ pci_set_region(hose->regions + 1,
+ CONFIG_PCI_IO_BUS,
+ CONFIG_PCI_IO_PHYS,
+ CONFIG_PCI_IO_SIZE,
+ PCI_REGION_IO);
+
+ pci_set_region(hose->regions + 2,
+ CONFIG_PCI_PREF_BUS,
+ CONFIG_PCI_PREF_PHYS,
+ CONFIG_PCI_PREF_SIZE,
+ PCI_REGION_PREFETCH);
+
+ pci_set_region(hose->regions + 3,
+ 0,
+ 0,
+ gd->ram_size,
+ PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
+
+ hose->region_count = 4;
+}
+
+int board_pci_post_scan(struct pci_controller *hose)
+{
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/post.h>
+#include <asm/processor.h>
+
+int arch_cpu_init(void)
+{
+ int ret;
+
+ post_code(POST_CPU_INIT);
+#ifdef CONFIG_SYS_X86_TSC_TIMER
+ timer_set_base(rdtsc());
+#endif
+
+ ret = x86_cpu_init_f();
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+int print_cpuinfo(void)
+{
+ post_code(POST_CPU_INFO);
+ return default_print_cpuinfo();
+}
+
+void reset_cpu(ulong addr)
+{
+ /* cold reset */
+ x86_full_reset();
+}
chromebox_panther.dtb \
crownbay.dtb \
galileo.dtb \
- minnowmax.dtb
+ minnowmax.dtb \
+ qemu-x86.dtb
targets += $(dtb-y)
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+
+/ {
+ model = "QEMU x86";
+ compatible = "qemu,x86";
+
+ config {
+ silent_console = <0>;
+ };
+
+ chosen {
+ stdout-path = "/serial";
+ };
+
+ pci {
+ compatible = "pci-x86";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ u-boot,dm-pre-reloc;
+ ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
+ 0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
+ 0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+ };
+
+};
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _X86_ARCH_GPIO_H_
+#define _X86_ARCH_GPIO_H_
+
+/* Where in config space is the register that points to the GPIO registers? */
+#define PCI_CFG_GPIOBASE 0x44
+
+#endif /* _X86_ARCH_GPIO_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ARCH_QEMU_H_
+#define _ARCH_QEMU_H_
+
+/* I/O Ports */
+#define CMOS_ADDR_PORT 0x70
+#define CMOS_DATA_PORT 0x71
+
+#define LOW_RAM_ADDR 0x34
+#define HIGH_RAM_ADDR 0x35
+
+#endif /* _ARCH_QEMU_H_ */
--- /dev/null
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+if VENDOR_EMULATION
+
+choice
+ prompt "Mainboard model"
+
+config TARGET_QEMU_X86
+ bool "QEMU x86"
+ help
+ This is the QEMU emulated x86 board. U-Boot supports running
+ as a coreboot payload as well as bare boot without coreboot.
+ There are two types of x86 boards supported by QEMU which are
+ supported by U-Boot. They are via QEMU '-M pc', an i440FX/PIIX
+ chipset platform and '-M q35', a Q35/ICH9 chipset platform.
+
+endchoice
+
+source "board/emulation/qemu-x86/Kconfig"
+
+endif
--- /dev/null
+if TARGET_QEMU_X86
+
+config SYS_BOARD
+ default "qemu-x86"
+
+config SYS_VENDOR
+ default "emulation"
+
+config SYS_SOC
+ default "qemu"
+
+config SYS_CONFIG_NAME
+ default "qemu-x86"
+
+config SYS_TEXT_BASE
+ default 0xfff00000
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+ def_bool y
+ select X86_RESET_VECTOR
+ select QEMU
+ select BOARD_ROMSIZE_KB_1024
+
+endif
--- /dev/null
+QEMU X86 BOARD
+M: Bin Meng <bmeng.cn@gmail.com>
+S: Maintained
+F: board/emulation/qemu-x86/
+F: include/configs/qemu-x86.h
+F: configs/qemu-x86_defconfig
--- /dev/null
+#
+# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += qemu-x86.o start.o
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+int board_eth_init(bd_t *bis)
+{
+ return pci_eth_init(bis);
+}
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+ jmp early_board_init_ret
--- /dev/null
+CONFIG_X86=y
+CONFIG_VENDOR_EMULATION=y
+CONFIG_TARGET_QEMU_X86=y
+CONFIG_CMD_NET=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
+CONFIG_DEFAULT_DEVICE_TREE="qemu-x86"
--- /dev/null
+/*
+ * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN (1 << 20)
+
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_X86_SERIAL
+
+#define CONFIG_PCI_MEM_BUS 0xc0000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_PREF_BUS 0xd0000000
+#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
+#define CONFIG_PCI_PREF_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x2000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0xe000
+
+#define CONFIG_PCI_PNP
+#define CONFIG_E1000
+
+#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial\0" \
+ "stdout=serial\0" \
+ "stderr=serial\0"
+
+#define CONFIG_SCSI_DEV_LIST \
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371SB_1}
+
+/* GPIO is not supported */
+#undef CONFIG_INTEL_ICH6_GPIO
+#undef CONFIG_CMD_GPIO
+
+/* SPI is not supported */
+#undef CONFIG_ICH_SPI
+#undef CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+
+/* Video is not supported */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+
+#endif /* __CONFIG_H */
projects / karo-tx-uboot.git / commitdiff