karo: tx6u: fix definition and setup of UART1 SEL_INPUT register

diff --git a/board/karo/tx6/lowlevel_init.S b/board/karo/tx6/lowlevel_init.S
index 1831b0cafcbcade6eb70b8243acaf7a395416c3c..d6dafcbc229d88c3d36478bda85ed0e3b224bced 100644 (file)
--- a/board/karo/tx6/lowlevel_init.S
+++ b/board/karo/tx6/lowlevel_init.S
@@ -622,8 +622,8 @@ ivt_end:
 #define IOMUXC_SW_PAD_CTL_GRP_B4DS             0x020e07a0
 #define IOMUXC_SW_PAD_CTL_GRP_B5DS             0x020e07a4
 #define IOMUXC_SW_PAD_CTL_GRP_B6DS             0x020e07a8
-#define IOMUXC_UART1_UART_RTS_B_SELECT_INPUT   0x020e091c
-#define IOMUXC_UART1_UART_RX_DATA_SELECT_INPUT 0x020e0920
+#define IOMUXC_UART1_UART_RTS_B_SELECT_INPUT   0x020e08f8
+#define IOMUXC_UART1_UART_RX_DATA_SELECT_INPUT 0x020e08fc
 #endif
 
 dcd_hdr:
@@ -651,7 +651,11 @@ dcd_start:
        /* UART1 pad config */
        MXC_DCD_ITEM(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA7,        0x00000001)        /* UART1 TXD */
        MXC_DCD_ITEM(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA6,        0x00000001)        /* UART1 RXD */
+#ifdef CONFIG_MX6Q
        MXC_DCD_ITEM(IOMUXC_UART1_UART_RX_DATA_SELECT_INPUT, 0x00000003)        /* UART1 RXD INPUT_SEL */
+#else
+       MXC_DCD_ITEM(IOMUXC_UART1_UART_RX_DATA_SELECT_INPUT, 0x00000002)        /* UART1 RXD INPUT_SEL */
+#endif
        MXC_DCD_ITEM(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA0,        0x00000001)        /* UART1 CTS */
        MXC_DCD_ITEM(IOMUXC_SW_MUX_CTL_PAD_SD3_DATA1,        0x00000001)        /* UART1 RTS */
        MXC_DCD_ITEM(IOMUXC_UART1_UART_RTS_B_SELECT_INPUT,   0x00000003)        /* UART1 RTS INPUT_SEL */