]> git.kernelconcepts.de Git - karo-tx-uboot.git/commitdiff
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx
authorWolfgang Denk <wd@pollux.denx.de>
Sun, 12 Mar 2006 20:33:52 +0000 (21:33 +0100)
committerWolfgang Denk <wd@pollux.denx.de>
Sun, 12 Mar 2006 20:33:52 +0000 (21:33 +0100)
1  2 
CHANGELOG

diff --cc CHANGELOG
index e25bc91000b31afbf6d69006677f2c13e97e4950,7494c67cc81fee804fe6f1c9b5f5e01701d6f09d..42ed5c9cb0bc5be25b916d78a8de7933b71858dc
+++ b/CHANGELOG
  Changes since U-Boot 1.1.4:
  ======================================================================
  
 -* Add support for 28F256J3A flah (=> 64 MB) on PM520 board
+ * Enable address translation on MPC83xx
+   Patch by Kumar Gala, 10 Feb 2006
+ * Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx
+   Patch by Kumar Gala, 25 Jan 2006
+ * Fixed defines for MPC83xx SICRL register to match current specs
+   Patch by Kumar Gala, 23 Jan 2006
+ * Only disable the MPC83xx watchdog if its enabled out of reset.
+   If its disabled out of reset SW can later enable it if so desired
+   Patch by Kumar Gala, 11 Jan 2006
+ * Allow config of GPIO direction & data registers at boot on 83xx
+   Patch by Kumar Gala, 11 Jan 2006
+ * Enable time handling on 83xx
+   Patch by Kumar Gala, 11 Jan 2006
+ * Make System IO Config Registers board configurable on MPC83xx
+   Patch by Kumar Gala, 11 Jan 2006
-   Patch by Kumar Gala 12 Jan 2006
 +* Fixed PCI indirect config ops to handle multiple PCI controllers
 +  We need to adjust the bus number we are trying to access based
 +  on which PCI controller its on
-   Patch by Kumar Gala 11 Jan 2006
++  Patch by Kumar Gala, 12 Jan 2006
 +
 +* Report back PCI bus when doing table based device config
-   Patch by Kumar Gala 11 Jan 2006
++  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Added support for PCI prefetchable region and BARs
 +  If a host controller sets up a region as prefetchable and
 +  a device's BAR denotes it as prefetchable, allocate the
 +  BAR into the prefetch region.
 +
 +  If a BAR is prefetchable and no prefetchable region has
 +  been setup by the controller we fall back to allocating
 +  the BAR into the normally memory region.
++  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Add helper function for generic flat device tree fixups for mpc83xx
 +  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Add support for passing initrd information via flat device tree
 +  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Added OF_STDOUT_PATH and OF_SOC
 +
 +  OF_STDOUT_PATH specifies the path to the device the kernel can use
 +  for console output
 +
 +  OF_SOC specifies the proper name of the SOC node if one exists.
 +  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Allow board code to fixup the flat device tree before booting a kernel
 +  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Added CONFIG_ options for bd_t and env in flat dev tree
 +
 +      CONFIG_OF_HAS_BD_T will put a copy of the bd_t
 +      into the resulting flat device tree.
 +
 +      CONFIG_OF_HAS_UBOOT_ENV will copy the environment
 +      variables from u-boot into the flat device tree
 +
 +  Patch by Kumar Gala, 11 Jan 2006
 +
 +* Add support for the DHCP vendor optional bootfile (#67).
 +  Ignores the vendor TFTP server name option (#66).
 +  Patch by Murray Jensen, 30 Jun 2005
 +
 +* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode
 +  Patch by Andy Fleming, 14 Jun 2005
 +
 +* Fix bad register definitions for LTX971 PHY on MPC85xx boards.
 +  Patch by Gerhard Jaeger, 21 Jun 2005
 +
 +* Add netconsole and some more commands to RPXlite_DW board
 +  Patch by Sam Song, 19 Jun 2005
 +
 +* Fix bad declaration on pci_cfgfunc_nothing
 +  Patch by Sam Song, 19 Jun 2005
 +
 +* Adjust "echo" as a default command
 +  Patch by Sam Song, 19 Jun 2005
 +
 +* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC
 +  Patch by KokHow Teh, 16 Jun 2005
 +
 +* Add crc of data to jffs2 (in jffs2_1pass_build_lists()).
 +  Patch by Rick Bronson, 15 Jun 2005
 +
 +* Coding Style cleanup
 +
 +* Avoid dereferencing NULL in find_cmd() if no valid commands were found
 +  Patch by Andrew Dyer, 13 Jun 2005
 +
 +* Add ADI Blackfin support
 +  - add support for Analog Devices Blackfin BF533 CPU
 +  - add support for the ADI BF533 Stamp uClinux board
 +  - add support for the ADI BF533 EZKit board
 +  Patches by Richard Klingler, 11 Jun 2005
 +
 +* Add loads of ntohl() in image header handling
 +  Patch by Steven Scholz, 10 Jun 2005
 +
 +* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
 +  variable to set clock
 +  Patch by Yuli Barcohen, 05 Jun 2005
 +
 +* RPXlite configuration fixes
 +  - Use correct flash sector size
 +  - Use correct memory test end address
 +  - Add support for bzip2 compression
 +  - Various small fixes
 +  Patch by Yuli Barcohen, 05 Jun 2005
 +
 +* Memory configuration changes for ZPC.1900 board
 +  - Fix SDRAM timing on both local bus and 60x bus
 +  - Add support for second flash bank (SIMM)
 +  - Change boot flash base
 +  Patch by Yuli Barcohen, 05 Jun 2005
 +
 +* Add support for Adder boards with 16MB SDRAM;
 +  add support for second FEC on Adder87x board.
 +  Patch by Yuli Barcohen, 05 Jun 2005
 +
 +* Fix conditional for including ks8695eth driver
 +  Patch by Greg Ungerer, 04 Jun 2005
 +
 +* Fix Makefile: include config.mk only after CROSS_COMPILE is defined
 +  Patch by Friedrich Lobenstock, 02 Jun 2005
 +
 +* Fix comment in common/soft_i2c.c
 +  Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005
 +
 +* Cleanup compiler warnings.
 +  Patch by Greg Ungerer, 21 May 2005
 +
 +* Word alignment fixes for word aligned NS16550 UART
 +  Patch by Jean-Paul Saman, 01 Mar 2005
 +
 +  Fixes bug with UART that only supports word aligned access: removed
 +  "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some
 +  (broken!) versions of GCC generate byte accesses when encountering
 +  the packed attribute regardless if the struct is already correctly
 +  aligned for a platform. Peripherals that can only handle word
 +  aligned access won't work properly when accessed with byte access.
 +  The struct NS16550 is already word aligned for REG_SIZE = 4, so
 +  there is no need to packed the struct in that case.
 +
 +* Fix behaviour if gatewayip is not set
 +  Patch by Robin Gilks, 23 Dec 2004
 +
 +* Fix cleanup for netstart board.
 +  Remove build results from repository
 +
 +* Some code cleanup for GCC 4.x
 +
 +* Fixes to support environment in NAND flash;
 +  enable NAND flash based environment for delta board.
 +
 +* Add support for Intel Monahans CPU on Zylonite and Delta boards
 +  (This is Work in Progress!)
 +
 +* Add support for TQM8260-AI boards.
 +
 +* Minor code cleanup
 +
 +* Merge the new NAND code (testing-NAND brach); see doc/README.nand
 +  Rewrite of NAND code based on what is in 2.6.12 Linux kernel
 +  Patch by Ladislav Michl, 29 Jun 2005
 +
 +* Add lowboot target to mcc200 board
 +  Patch by Stefan Roese, 4 Mar 2006
 +
 +* Fix problem with flash_get_size() from CFI driver update
 +  Patch by Stefan Roese, 1 Mar 2006
 +
 +* Make CFG_NO_FLASH work on ARM systems
 +  Patch by Markus Klotzbuecher, 27 Feb 2006
 +
 +* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock,
 +  use hush shell.
 +
 +* Convert mcc200 to use common CFI flash driver
 +  Patch by Stefan Roese, 28 Feb 2006
 +
 +* Add env-variable "unlock" to handle initial state of sectors
 +  (locked/unlocked).
 +
 +  Only the U-Boot image and it's environment is protected,
 +  all other sectors are unprotected (unlocked) if flash
 +  hardware protection is used (CFG_FLASH_PROTECTION) and
 +  the environment variable "unlock" is set to "yes".
 +
 +  Patch by Stefan Roese, 28 Feb 2006
 +
 +* Update drivers/cfi_flash.c:
 +  - find_sector() called in both versions of flash_write_cfiword()
 +  Patch by Peter Pearse, 27th Feb 2006
 +
 +* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
 +  Patch by Jose Maria Lopez, 16 Jan 2006
 +
 +* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
 +  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29
 +
 +* Changes/fixes for drivers/cfi_flash.c:
 +  We *should* check if there are any error bits if the previous call
 +  returned ERR_OK (Otherwise we will have output an error message in
 +  flash_status_check() already.)  The original code would only check for
 +  error bits if flash_status_check() returns ERR_TIMEOUT.
 +  Patch by Marcus Hall, 23 Aug 2005
 +
 +* Changes/fixes for drivers/cfi_flash.c:
 +  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
 +  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
 +  Patch by Sangmoon Kim, 19 Aug 2005
 +
 +* Fixes for drivers/cfi_flash.c:
 +  - Fix wrong timeout value usage in flash_status_check()
 +  - Round write_tout up when converting to msec in flash_get_size()
 +  - Remove clearing flash status at the end of flash_write_cfibuffer()
 +    which sets Intel 28F640J3 flash back to command mode on CSB472
 +  Patch by Tolunay Orkun, 02 July 2005
 +
 +* Add basic support for the SMMACO4 Board from PanDaCom.
 +  Patch by Heiko Schocher, 20 Feb 2006
 +
 +* Add GIT version information (commid ID) to untagged U-Boot versions
 +
 +  As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
 +  of all unreleased (untagged) U-Boot images will be automatically
 +  extended upon compiletime with a part of the GIT commit ID and
 +  possibly with "dirty" if uncommited changes are detected.
 +
 +  Here an example for the resulting version:
 +  "U-Boot 1.1.4-g3457ac18-dirty"
 +
 +  The version is now maintained in the toplevel Makefile and the
 +  version headers are autogenerated.
 +
 +  Patch by Stefan Roese, 9 Feb 2006
 +
 +* Update default environment for INKA4x00 board.
 +
 +* Convert CPCI750 to use common CFI flash driver
 +  Patch by Reinhard Arlt, 8 Feb 2006
 +
 +* Various changes to esd HH405 board specific files
 +  Patch by Matthias Fuchs, 07 Feb 2006
 +
 +* Cleanup U-Boot boot messages on ARM.
 +
 +  To match the U-Boot user interface on ARM platforms to the U-Boot
 +  standard (as on PPC platforms), some messages with debug character
 +  are removed from the default U-Boot build.
 +  Enable DEBUG for lib_arm/board.c to enable debug messages.
 +  New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options.
 +  Patch  by Stefan Roese, 24 Jan 2006
 +
 +* Fix various compiler warnings on ppc4xx builds (ELDK 4.0)
 +  Patch by Stefan Roese, 18 Jan 2006
 +
 +* Add VGA support (CT69000) to CPCI750 board.
 +  Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().
 +  Patch by Reinhard Arlt, 30 Dec 2005
 +
 +* PMC405 and CPCI405: Moved configuration of pci resources
 +  into config file.
 +  PMC405 and CPCI2DP: Added firmware download and booting via pci.
 +  Patch by Matthias Fuchs, 20 Dec 2005
 +
 +* Fix 28F256J3A support on PM520 board
 +  (without bank-switching only 32 MB can be accessed)
 +
 +* Fix mkimage bug with multifile images created on 64 bit systems.
 +
 +* Add support for 28F256J3A flash (=> 64 MB) on PM520 board
  
  * Fix compiler problem with at91rm9200dk board.
    Patch by Eugen Bigz, 19 Dec 2005